Community Brag Posts

Altered plan somewhat to make it heavy duty seating when needed. 18" inside height is necessary for hubby's boots especially. Room for my lab coat too! It suits our 100 year old, nearly closet-less farmhouse well.

A friend of mine was looking for extra counter space, and asked me to build a kitchen island, but with a few modifications. He wanted space on the end to slide two stools, so I used fewer slats. After I finished the build and the first coat of paint, he decided it was 3" too short. So, I got creative and used some stair spindles to create decorative feet! I'm actually really glad for the mix-up, because the feet give it so much character. I layered on the paint by starting with a coat of plum, then a coat of cherry, and followed it up with a glaze mix with oak stain. Then three coats of spray on poly and it was done.

This is a bench that I have built for a friend of mine to fit exactly in her entry way. I made it in the spirit of the Pottery Barn furniture that she already has. I used regular Douglas Fir found at anywhere lumber is sold.

The bench was put together using mostly 2-1/2″ pocket hole screws. I use my Kreg Pocket Hold Jig to drill the holes, but any jig should work.

See the link for detailed instructions.

Was made using 2x4 plans from Ann-white web page. Thanks for the idea

My wife and I wanted to do something with our surface mounted . Then came up with this design.

Bob Cousineau

This was our first project using the Kreg Jig K4 pocket system.  We wanted a simple and affordable project to learn how and practice using this tool.  I also wanted a narrow buffet table to fit in our formal dining area, which I could never find in stores, so making one seemed appropriate.

The only difference from the original plans is that the sides are 37 1/4" and the back is a 1x14 @ 58 1/2".

Thank you for this simple yet elegant console table plan!

This was the second coffee table I've built using Ana's plans and I'm so grateful for this website! The plans are easy to follow and adapt for truly "custom" furniture and a fraction of what you would pay for similar pieces in a store or online.

I adapted the plans to make the table a little shorter and I only used four 2 x 6 boards for the table top instead of five so that it would fit in with our couch a little better.

I saved a little bit of money by using furring strips for the 2 x 2s and I opted for 3/4" plywood for the bottom shelf.

The Kreg Jig (i get by with the little R3 but I'm hoping to upgrade someday soon) is invaluable for projects like this.

After building the computer desk from Shanty@Chic's design. We decided to make a simple bench that matches. It is about 36" long (which is long), but we wanted both kids to be able to sit in front of the computer at the same time.
Cost was low except more Minwax stain and a 1"x3" for the trim on the bottom. Most was built from scraps desk material and we have a ton of extra wood we saved from the trim carpenter when we built our house last year.

This is my first project using a Kreg Jig. Went together in about half the time of previous projects. I love it. Thanks for sharing the plans!

Hi.   I'm I the uk.  I saw your video on how to make this sofa.  I showed my hubby. He said ( you'll never be able to do that).  Red flag to a bull. Ha ha. I. So proud of myself.  It was really easy your plans are very easy to follow . I bought the cushions from ikea . Just one problem . The gray British weather.  Rain Rain  and more rain.  I'm looking into something to protect the feet from the wet. 

Stephanie Harvey. Age 61

Taking the top of solar footlights & glued them to the top of a painted lamp cover then add the fishing line to hang & presto chango! You now have a hanging solar lantern for under $7!

King size Farm House Bed. Project took about 30 hours of work (1-3 hours per night). Built with White Board and Pine woods. Pine was used for the head and foot boards slats. We made the mistake of making our bed head board and foot boards 6 inches too wide (mental brain fart). So our options where to scrap or figure something out. After some thought we decided to place a step on the running boards using a 1X3 (pine). The effect was stunning. Also added "vine" vertically to the end of both foot and head board, it looks better in person (you'll have to zoom into image). We took care in sanding all boards, staining using Wood preconditioner, then Minwax Colonial Maple, and then Semi-Gloss Minwax Polyurethane. We love the sturdiness of the bed! as our friends that have seen it have continuously repeat "It's beautiful, this is how furniture used to be made" couldn't agree more!

This was my first project. It was really easy! Although next time I will get a trash can first and build around it. I'm having a hard time finding a trash can that will fit.

My entry was filled with a huge armoir/bar, that made the entire house feel cramped...So, I moved it and replaced it with this beauty!

I wanted a shelf, so I used a 1x12 trimmed with 1x2's for this.
I modified and went with 5 drawers instead of 4...I have 5 boys, this way they each get a drawer for their stuff.
I also alternated finishes on the top boards to create a striped look.

Notice something missing? The hardware for the drawers! I cannot make up my mind on which ones to buy. ;) Any suggestions would be greatly appreciated!

I like the straight lines of this piece, so I want the pulls/knobs to be somewhat contemporary.