Community Brag Posts

I used the picnic table plans with a minor modification for the top and seats. I used flooring for trailers that were rejects. I made this for my wife for her birthday and she loved it.
 

These were my first builds. I am so pleased with how it all turned out! My sister in law introduced me to Ana's page and I was off! We have twin, 5 year old girls with their own rooms. They both needed new furniture and I fell in love with the Farmhouse Bed Plans. I used a little of the Mom's Fancy Farmhouse Bed Plans and the Queen Farmhouse Bed Plans. I wanted to use our existing mattresses with box springs, so I put a cleat on the inside edge, running the length of the side rails. Another modification, being that I wanted to use mortised bed locks on the side rails to allow for quick connects to the head and foot boards. I used these from LV: http://www.leevalley.com/en/hardware/page.aspx?p=67916&cat=3,40842,4126… I routered them in using a guide. I strongly recommend them if you are able. You can paint the bed pieces independently and assemble very easily. No building in the room! The other modification I made was that I made the actual side rails higher in order to fashion a trundle bed underneath. The trundle is a double as well, rolls on stationary castors, and on carpet too. I have a single mattress in it and it can be pulled out on either side. One side is for the bed and the other can be used as storage etc. My girls can easily pull it out and put it back in place. Great for sleep overs and extra company! It is technically unattached from the bed, but there are small stationary castors that run the inside length of the head and foot boards on their sides to act as guides for the trundle. I have attached pictures to show what I mean. I did not want it banging around underneath, and the castors are great little guides. I have more detailed pictures, but am having difficulty including them as their file size is too large. Since making the beds, I have also made the farmhouse side tables, and am in the midst of making the Madison Dressers to match! It is all coming together nicely. It took me about 2 months to complete the beds, but that was a few hours here, and a few hours there. I didn't think that was too bad, as I made two of them and it was my first project! Either way, I am very excited and have the builders itch now! So many things to create. Thanks for a great site, and so many ideas.

My daughter and I built the farmhouse style doll bed and had a great time! The plans were wonderfully easy to understand and follow. It was a great experience to work together and learn some new skills. She even chose the paint color herself - pretty good taste for a 9 year old! Thank you so much for a great, inspiring website!!

I built this wine case for my for my daughter and her husband. I couldn't done it with Ana"s great plans.

I built Ana’s console table plan to use in staging homes. I paint washed the top and painted the frame black. This is my very first project and I love how it turned out!

I was super inspired by the "iTable" which I am also going to build... but combined the idea with an idea I saw in a fancy home decorating magazine (a jigsaw puzzle stool).... took a lot of fiddling to come up with a 'universal puzzle piece' but in the end it worked out!

We needed to convert our exercise room to a bedroom for our granddaughter visiting from England.

I added additional support inside the legs as I wasn't keen on supporting the rails simply with glue/ screws. This allowed the weight to transfer to the floor directly from the rails. Of course, it was all glued and screwed or nailed. Otherwise I followed the plans found here.

The fenial‎ treatments are antique "looking" door knobs from a national hobby store. To secure them to the uprights, I drilled a whole that was just under the width of threaded rod couplers which were the thread size for bolt from the knob. I tapped with a hammer so the coupler would wedge into and down the whole. The couplers were purchase from a hardware store.

Bedside Tables - Chalk white paint and stained top same stain as farm bed.

I am enamored by the Simple Outdoor Table that is usually featured on the homepage. This was my second project, and in hindsight, I it took several weeks to finish working at night because I made several mistakes that required some problem solving. Naively, though, I studied the plans, borrowed a saw and got to work.

I opted for two benches to save space on the patio when not in use. As you can see in the picture of the bench tops, I opted for a smaller spacer (1/16")because it improved the looks dramatically, but that left me with a gap. There will be a skinny slat in the middle of each bench.

I also opted for 3/16" spacers on the tabletop which required one more board than was scripted. That is much easier to account for on the table then the benches.

You can see from the stacks of lumber in the garage, assembling is the easy part! I hope to never see the words, sand, stain, and seal in sequence again. I also learned a few difficult lessons when it came to using the Kreg Jig, which was new to me.

Now that it's done, though, I am very proud of the outcome.

I enjoy making birdhouses and log cabin style is my favorite. I make the logs by setting my saw to rip 3/4 pine at 3/4 so I have 3/4 square strips. I then decide the size of my birdhouse and cut the logs accordingly. I also "wittle" on them a little to make it look more authentic. I simply then just stack, glue and nail one row at a time. You can use 1/4 poplar for the roof but I ripped pine at 1/16 and cut shakes with my utility knife and glue them on one at a time (there are 104 on this roof).

I had a friend make a request for a console table.  We came up with this design to fit her space and needs.  It was a pretty easy build.

Built the entertainment center for our new home. Thanks for the great plans.

This is my new couch ,that I built with my husbands help,I could not find a one piece cushion in my area but, I did manage to find individual cushion.I am no expert , but I am learning as I go.

I had my seed starters sitting on a TV stand by my sunny window, which was as ugly as it gets (see before photo...). So, I built this little console for my gardening stuff to sit on while my seedlings are growing. It turned out being the perfect size for what I'm using it for. I only modified it slightly, by adding end pieces to the top (just subtracted 6'' from the length of the top pieces and measured the width of the top to decide the length of the end pieces. I also used pocket holes to attach my bottom shelf pieces and the top shelf pieces, instead of nails. I've never done a 2 tone piece (I love the look of stained wood) so I was nervous about painting over the wood...but I'm really really happy with how it turned out! It was easy to make, and mine was done in an afternoon. Thanks Ana!!

Build Instructions:
http://www.instructables.com/id/Shelves-for-a-Shed/

I looked at purchasing brackets but I couldn’t get the exact size and the price seemed high for something so simple – plus I had a few excess 2×4s from the last job. Mainly, I wanted to utilize the area in the upper portion of the shed while keeping the floor clear for yard/garden equipment. There are multiple variations of this style bracket online. I took a little different approach by utilizing the existing part of the shed (top plate) for support. I don’t know the load capacity but I’m quite sure it will handle any of the items (tarps, paint cans, etc.) I plan to place on the shelf.

My wife saw this project on your page. I had to shorten it to two feet, but, it pretty easy to do and turned out pretty well 👍🏼😁

Steve Phethean
 

After spending weeks lurking on the site, I decided to go for it. I have no real experience doing this sort of thing, so everything was a learning experience. I had to invest in a lot of tools but the materials only cost about $100 ($50 in pine from local home store + ~$50 in other materials).

I live in a small apartment, so my workplace was less than ideal. I did a lot of sawing and sanding in the space you see so I made a HUGE mess, but I didn't really have any other choice.

I'm really pleased with the outcome. It isn't perfect, but it doesn't have to be. There are gaps in the planks on the table top, but I can live with it. I didn't follow the plans exactly in order. I built the table top first which allowed me to add removable legs for when it comes time to move. Instead of screwing the legs, I hung hanger bolts and did a nut/bolt setup (as I type this, I realize this was not a necessary step - I could have bolted the legs instead of screwing them in per the stepwise instructions, which would have been easier. Alas, what's done is done!). The picture shows two sets of nuts per bolt, but this is only because I had extra bolts and this ensure that I don't lose them.

I plan on finishing with a polyurethane and building the benches but that will be in the future. My advice to anyone on the fence is to just do it. It's easier than you think and if it doesn't turn out exactly perfect, no big deal. My project goes to show that even with a tiny Chicago apartment, as long as you're willing to make a mess, it can be done. Good luck, thanks for reading!

*sorry my photos are aren't right-side-up - just tilit your head :)