Community Brag Posts

Very cool plans! Lots of fun!!!

Had a great time building this double seat Adirondack chair with a cooler in the center. Surprised the wife with it for Mother's Day.

I'm pretty proud of my first project even though it does have some flaws. I learned a lot. I made every cut with a handsaw! Don't do this unless you want to have some seriously sore arms. I'm ready to graduate to a circular saw. I also used a hammer and nails instead of a nailer, so this project took me a little longer than it should have. Thanks so much, Ana, for the opportunities!

Super easy and done in 1/2 a day

Built the Rustic X console table to use as my entertainment center it works perfect for my 42in flat screen, PS3, and dish receiver. I did not use the x's and stained it with red mahogany stain and gloss brushing lacquer.

We've had our bed on a small metal frame for years with the hopes of someday finding a bed frame that we liked. With the family out of town, I decided to try and build one after getting this site from a friend (LSU Builder). The steps and materials were a HUGE help! I only had to make a small amount of changes from the original plans....most notably adding additional 2x4's to each headboard leg along with one in the middle. This created more space to connect the headboard to the body of the frame with the bolts. This was the first time I'd ever used a Kreg jig to create pocket holes. I will definitely use these for other projects as they seem to be extremely strong.
All in all, I will definitely be using the site for additional plans. I'm an intermediate "wood worker" and really enjoy tackling projects. Thanks!0

This the is first time I have ever built a peice of furniture.  My best friend made all of her furniture in her house using her kreg jig and visiting Ana's website.  I ended up building this in her garage since I was still in an apartment at the time.  It was a total labor of coldy freezing love.  :D  Now I want to build EVERYTHING!  We had to adjust some of the numbers on the plan and it cost a little more than $75 but totally worth it!

My wife wanted a collapsible table for her craft fair sales. I put a wooden dowel in the opening for her to drape packing paper over and hooks on the sides for gift bags. Easy plans to follow and it turned out great!

i used the a modified rustic x coffee table plan. i did not use the x and used kiln dried 2x4s for most everything except the bottom shelf i used 2 1x12x4 because they are $6.50 each compared to $20-25 each for 8ft and i cut the 2x2 out of the kiln dried 2x4s there was a fair amount of waste but the kiln dried 2x4s are much nicer to work with then green 2x6s.i stained in a red mahogany stain and gloss brushing lacquer. The top took 8 2x4s cut to just shy of 48" do i could get two from each piece. i shorted the table frame to match. if you are using green wood like i did on my first table the rustic x console table you will notice cracks forming in knots especially. using kiln dried lumber is recommended to ensure your project will last.

This desk was originally my great aunt's sewing desk. After 47 years it's been passed down to me. I decided to paint it blue with a chalkboard paint top. I antiqued it using my little sander and some Minwax Red Mahogany stain. I spray painted the drawer pulls to update them and finished everything with Minwax Furniture Wax on the blue and chalk on the chalkboard finish. Now I just need to get up and sew.

We needed some more storage in our basement so I made these shelves.  They are 10 feet long.  I couldn't get the 10 foot long 2x4s into the basement through the house, so my husband helped me slide each board through a tiny window one at a time.  I also decided to paint the shelves to make them look nicer since they are in the finished part of our basement.  Overall, I think they turned out great and they can hold a lot more than I expected.     

This was my and my husband's first project and it was easier than expected. There were slight imperfections with the drawers, but they were hidden by the faces and trim. It was our first time using a Kreg jig and we LOVED it!! We will be building furniture for Christmas presents this year, we are hooked!! The project took one weekend to build, and we spent around 4-5 hours a day.... remember we are newbies so we had to refer to the plan ... a lot! We went with the plywood top and it is sturdy and we can't wait to paint it and get it looking like a finished product. My husband was testing the daybed sans mattress.

Easy and fun plan for a great looking coffee table. I changed the top a bit by adding two 2x2's and a 1x3 in the center, the five 2x6's looked a little plain to me. I also added an X in the front, I don't know why but really I really like it, almost gives it an open storage feel. The strain is "weathered gray" by rust oleum.

Built using the Simple, Cheap znd Easy Console Table Plan. I utilized a scrap piece of granite for the top that I cut to size and polished and poplar wood that I had laying around the shop.

Here is my version of the Cyndi Console Table. Made from poplar with oak backing. Took me about a week working on it in the evenings.