Community Brag Posts

Wife need a cabinet to keep pet supplies. - Steven Maine

We recently moved from our small Minneapolis Bungalow to an apartment in Maryland. It was the prefect opportunity to build the Farmhouse Table plans I had been admiring. When we went to my parents farm in North Dakota for Thanksgiving we spent a couple hours digging through the barn to find old barn wood for the project. The wood then made the 1,400 mile trek to our new apartment in Rockville. Yes, you read that correctly…the table was built in our carpeted apartment! No excuses people…you can make this table in your apartment! If you do not have access to a saw your local big box home improvement store can make the cuts for you. If you go that route the cut list Ana has will come in very handy!

I do a fair amount of woodworking, so I was able to complete the project in one day. If this is your first project I would allow a weekend to finish it.

Farmhouse Table with some slight modifications for sturdiness.

When we wanted a barn for our children to play in and use for their farm we discovered that nothing could be found to fit our fancy online. So with the use of some pictures of old barns and basic ideas we started on our very first wood project. Our tools consisted of a sawzal a table saw and cordless set of tools. Many hours later we have this to show for it. We used lots of scrap wood and bought only the hinges, latches and one sheet of plywood so our costs are skewed from someone trying to do it with new material.

I modified your plans a little and came up with this. Thank you for all your ideas. You are really artistic. - Paul

This is my first build ever! Since we recently moved into a place with little kitchen space, I thought this island would be perfect for extra storage we needed. I modified it from 5 2x6 on top, to 4 2x6 so it would fit in the corner we wanted it in. So the overall dimensions were 54" wide x 22" deep x 36" tall. I also changed the 1x2s that make the shelves to 3x5/8 boards, 15 per shelf, with approxinnately 1 inch between each. I predrilled countersink holes and screwed them on using 3/4" wood screws. The stain is a walnut colored water based stain, and I coated the top surfaces with a matte finish poly.

This is only the second project I've done, and I think it turned out great.  I modified the measurements so that it fits 3 on each side and 2 on each end, 10 total (but it can seat more; the table is huge).

All I have is a band saw and a drill, and that's all I needed!  The legs and support are Doug Fir from HD.  The top is all 2x10's that I bought at a lumber yard so that they would have it kiln-dried and have the edges re-sawn.  The only 2x10's I could find at the big box stores were green.

I finished it by sanding with 100 grit paper (I read not to over-sand doug fir for staining purposes), stained with one coat of Special Walnut (two coats on the breadboard ends), and 4 coats of satin poly.

This table is a tank.  So glad I assembled it indoors, as we would have had trouble getting it in the house after it was all put together!

Leaning Ladder Desk - Made By Tara Holmes - Australia - 2017

Fun quick project for Christmas giving.

This was my First project i still need to sand and stain.

We took the origional plans and used that as the basis for ours. We re-designed it for our size needs on Vectorworks, a design program that we usually use for working in theatre. We bought all of our supplies at Lowes for around $80. Fortunately for us we have a fully stocked scene shop avaliable for our projects. We built it one day then the next we sanded it and stained and sealed it. Its a nice heavy table that we LOVE. we wanted a project to make something nice that will last forver, but still be cheap because we are on a college budget. We used an engraver to put our initials on the table so one day we can show our kids what we can do. 

Barn door console built by Kathryn and Scott Winkler of K&S Coastal Furnishings in Pooler, GA. The hardware is a custom design by Scott and Kathryn sets it off with her one of a kind chippy finish. Fb.me/kscoastal

Tilt out shoe storage dresser

Took a while biting think it came together well. Removed the top drawer so I could use it for the iPad. Then added the bottom shelf to hold the lap top.

First ever shot at this. Loved the turn out. 

I used the same plans as posted but I tweaked them to work for the pallet wood that I ripped and sanded and stained with outdoor polyurethane. I also moved the short boards in so the box is smaller and added beams to support the bench separate. Because of Florida bugs and ants I also screwed a painting tarp to the bottom and punctured it several times for drainage to try and prevent bugs and weeds. The plans were so simple and I had so much fun making this.

Hanging basket holder. Gary Elliot