Community Brag Posts

This is a great bed for todlers.

Loving this tall entertainment center to fit under my wall-mounted television!

The dogs cant knock over my photos anymore!!!!

Added some fancy trim pieces in the middle to match the trim on the bottom.  So sturdy and hides all my junk!

http://www.ana-white.com/2012/06/plans/tall-corner-media-console

This was modified from a hose bench plan from Sunset Magazine website. I lengthened the front legs to 20 in and the back support legs to 36 in to accomodate a deeper box. It was made from 1x 6 scrap, a 36 in piano hinge, mdf pre-cut letters and two hinge supports. I painted the letters with yellow spray paint and the bench with two coats of exterior satin green paint. I also added a tray made from 1/8 in luan plywood timmed with 1x3 sides and screen molding sliding on a pvc 1x2. The seat was strengthened with additional cleats for sitting. Peel-n-stick decals

I decided to alter the plans to make it 15.5" deep 6' tall and the inside width @ 55" to accommodate a 55" TV. I used bead board as my wife recommended to give it a little more charactor. I also decided to have the drawers and doors on the bottom fit around the openings. Making this in different dimensions and tweeting it made it a much longer project and also having to paint it with 3 coats was time consuming. That being said I am pretty happy with the outcome. Now I just need to start on the side units. I also wanted to thank Ana for all of these wonderful plans. I have done many of these projects and hope to do so many more.

I used the plan from the Clubhouse bunk bed and modified to look similar to a Mathy-by-Boles Treehouse Bunkbed.

Essentially cut the original plans in half and modified a few things. The major change aside from the size is that is I used cedar plank for the top. I did this because I wanted a more professional look and I simply could resist the beautiful grain of the cedar. Pocket holed and glue cedar prices together after running them through the jointer. Also I connected the top to the frame via L brackets. Sealed the top with 3 layers of satin polyurethane. Apples poly with a 6 in microfiber brush dampened in mineral spirits. Also I painted the majority of the base with a foam roller. Put on slide plates on the bottom to adjust for slight unlevelness. Enjoy!

I'd built a table for my daughter and her roommates at college last year.  One of them is getting married this year and asked If I would mind building one for them.  They found a picture of this table someone had built and I tracked down your plans.  They needed it smaller so this one is 72" by 39" and I built the bench in a similar style.  

They wanted a smooth top (no grooves between boards) and no breaboard ends.  The table top wanted to warp a bit at the corners without the breadboards, so I imbedded some angle iron to keep it flat.

I purchased reclaimed 1x4s from a deconstruction warehouse called Re-Use Hawai'i for 20 cents a foot! I cut the lumber to make an un-ordered stagger pattern, experimented with dowel joints to join the cut pieces into 4 ft. planks and used pocket hole screws (hidden by the table legs and supports) to join the planks. I used old salvaged 1x2 window framing for the legs using pocket hole joinery.

This was my first attempt at a farm table. I found the fancy x plan for inspiration. The length is 6ft. I had to modify all of the measurements. All of the boards came off my grandad's old barn. The posts are laminated together from guide posts from his corral. There is a lot of history and character to the table. I did have to make the bench to match it. I'll post pictures of that soon. Most importatnly, my wife loves it!!!! Happy wife, happy life!!!

I built this lovely lego/coffee table for my son, 7 and my sanity at night! This is my 3rd plan I tried from Ana's wonderful plans. (I made airplane shelf and $10 wall ledge before).

Love these plans. Perfect weekend project. This bench is a nice size. 

Our bedrooms are 9' x 9' so when our girls needed to move in together, we needed a bunk bed that would be short enough to fit under the fan, have a place for drinks, books, an alarm, and tissues, and also have a place where our youngest could have a dark sleeping space while older sister stays up later.

We're not going to be in this setup for long, so I used common board to keep the cost down as much as possible. The whole bed cost about $200, but I would suggest staying away from common board. It was really warped and couldn't be sanded smooth. We ended up going with a dark, thick paint to cover the wood imperfections. To deal with the warped wood, I made an outline of each end of the bed with painter's tape on the garage floor and used weights to hold the wood where it was suppose to be. I also modified the plans to make the bottom bunk a bit shorter and made the whole thing only 3 inches off the ground. All put together the bed is very sturdy and everything lined up well.

I used some scrap wood to make the holders for drinks and tissues and a holder for the iPod and speakers. These just rest over the railing, so we can move them around if need be. The book racks are Ikea hacks....they're just spice racks painted to match the bed. The curtains are just hung on a 1" dowel set into the same cups that closet rods are put up with. I also added some flower knobs from Target so that the girls can hang a robe when it's cooler outside.

Thanks for the plans Ana! My girls LOVE this bed!

A client/friend asked for a rustic cooler she could use for her 30th birthday party. Thats what we came up with.

We have full plans on the blog: http://firefinishblog.com/2015/03/18/diy-rustic-cooler-with-plans/

This is my first piece of furniture to build. I love love love it!!! Now I can't wait to build something else! You may have created a monster in me. Thank you for the great plans!! 

I found the table here, but ended up using the modified plans for the 72" table from this site - http://tommyandellie.com/index.php/2012/01/13/new-and-improved-farmhous…

I haven't built anything out of wood for 20 years and I had no problems building this table. I also built the bench and two 15" extensions.