Community Brag Posts

Farmhouse - King Headboard - made it longer

Submitted by Anonymous (not verified) on Sun, 03/13/2016 - 19:40

We used flooring from Homedepot for the middle boards.  My decorator suggested that I make it longer and that worked well with this flooring.  We did discover that our Lowe's has the post for only $10 - we paid too much at 84 lumber - only to discover that they were warped - we had to use corner brackets to fix it.

 

Homedepot - Maui Whitewashed Oak 8 mm Thick x 11-1/2 in. Wide x 46-1/2in. Length Click Lock Laminate Flooring (22.28 sq. ft. / case)

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Lowe's grey stain - only had one
Recommended Skill Level
Intermediate

Media Console and Side Shelves

Edited dimensions of the Benchmark Media Console to build this beauty for the Wife. Stained the shelves to give it a little something extra. Plan on building matching end tables with stained tops and possibly replacing the console top with a stained version. 

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Satin Polycrylic
Recommended Skill Level
Advanced

Comments

DIY Gable Roof Greenhouse

Submitted by Anonymous (not verified) on Wed, 10/11/2023 - 10:42

I love my new Ana White designed greenhouse! It was amazingly easy to build and the material shopping list ensured there was very little waste or materials leftover after the build. I can’t wait to get started using it.

Bill Crabtree

Built from Plan(s)

Easy DIY Twin Beds

Submitted by Anonymous (not verified) on Sun, 10/15/2023 - 19:24

I have twins and they were fastly growing out of their toddler beds, so when I found Ana's plan for the easy twin bed (I made XL twin beds) I was ecstatic. In less than 4 days, both beds were built, painted, and ready for bedding!

BonjourTwinMama

Single picket recycle friendly bird feeder

Submitted by sxewhodey on Fri, 03/13/2020 - 06:45

I deviated unknowingly from the plan, lol. The top is wrong. I trimmed a half inch off one side to make the two lengs even, but you aren't supposed to use the lengths to go all the way down, but rather the lengths going accross as an overhang. Our project still came out nice, and my little girl will put hers together tomorrow.

I am getting ready to do a privacy fence project and I was debating between pine and cedar....this project actually seems to have confirmed I am allergic to cedar, so it was very useful in plans for a bigger project and saved years of sneezing.

Estimated Cost
$5
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Starter Project

Providence Picnic Table by Falafel and the Bee

This is my second large wood project...and both from this blog! The plans were fabulously easy. This was the first time I used my miter saw, and it was a great way to break it in.

 

Estimated Cost
Under $120.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Benjamin Moore Arborcoat Transparent Teak
Recommended Skill Level
Intermediate
Seasonal And Holiday

Toddler Bunk Beds

Submitted by Anonymous (not verified) on Sat, 07/16/2016 - 22:13

Modified the classic bunk bed plans to fit crib size matresses for our 1.5 & 2 year old girls, loved how my toddler bunk beds turned out! 

 

Estimated Cost
$200
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Behr 'Rainwater' paint in satin
Recommended Skill Level
Intermediate

Comments

em01024

Mon, 08/01/2016 - 17:27

Hi,

Could you email me the change in measurements you used for the crib mattress? 

It would help me out so much. I want to build a similar one for my boys. 

Thank you.

Danielle S. 

Our Farmhouse bed :)

Submitted by drewant on Sat, 04/19/2014 - 19:34

My wife and I wanted to upgrade to a king size bed and we stumbled upon this website and are so glad we did. My dad and I built this over the course of a month, working a couple hours at a time as time permitted. It was a fun build and the plans are easy to follow. I encourage anyone building these beds to find the exact measurement of your mattresses and modify the plans accordingly.

Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Valspar antique white in semi-gloss 4 coats
Recommended Skill Level
Intermediate

Comments

wthalin

Mon, 02/20/2017 - 13:43

I plan to make a bed very similar to what you did. I like the idea that it has a headboard and footboard with storage on the sides. How did you end up fastening the head and footboards to the body of the bed?

JanieMR

Mon, 02/20/2017 - 21:06

Bought your book and I love it, pouring through it every nite.  Planning to make the full size farmhouse bed.   Got lots of tools in the Garage and taking inventory of what's in there and what I'll need, (none have been used in a few years).  So glad my husband left all the tools behind when he left.

I've already built the worktable and saw horses. 

 

JanieMR

Mon, 02/20/2017 - 21:07

Bought your book and I love it, pouring through it every nite.  Planning to make the full size farmhouse bed.   Got lots of tools in the Garage and taking inventory of what's in there and what I'll need, (none have been used in a few years).  So glad my husband left all the tools behind when he left.

I've already built the worktable and saw horses. 

 

Coffee Table/ Rustic table

Submitted by KathaKon on Mon, 08/01/2016 - 08:08

That was my first real handmade project after just reading and following Ana Whites story and her diy projects for a while.

I´m coming from Germany and it took quite a while to "translate" all the lumber measurements to the german equivalents, since we don´t have the same ones. So I just took the similar lumber sizes I could find in a hardware store (Baumarkt), all in all 23 € for pine lumber plus wheel casters for 30 € each, which was the most expensive part of the project. I modified the size of the table as well and am very proud to present you my first project: my very first industrial coffee table for the home office.

I made the stain myself, by the way!

Here is the summary:

- one layer of black strong coffee (3 table spoons + 500 ml hotwater)

- 2-3 layers of steel + vinegar solution (sanding a bit inbeween)

- 2-3 layers of spar varnish (sanding a bit inbetween)

 

Hope you like it;) and thanks a lot to Ana White for being so creative and delivering loads of beautiful diy projects for woodwork lovers all over the world!

 

Looking forward to my next project!!!

Built from Plan(s)
Estimated Cost
aprox 160 €
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
stain + spar varnish
Recommended Skill Level
Beginner

$55 Fancy X Desk

This was probably my favorite build yet! Love how it turned out

Built from Plan(s)
Estimated Cost
$80
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax walnut polyshades
Recommended Skill Level
Intermediate

Linzy's outdoor play escape

Submitted by Myk3 on Mon, 06/09/2014 - 13:03

Built using the plans as a starting point and built it bigger than the plans called for.. The deck is 10x10 and the playhouse is 6x10. I used pressure treated lumber for everything but the playhouse. I still need to paint the house and stain the deck, then put the roof on.. if it would stop raining.. Once i'm done staining the deck I can put the slide back on also. ''

Swings, monkey bars, and rings / trapeze was ordered from Amazon.

Built from Plan(s)
Estimated Cost
2000
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

doll high chair

doll high chair with movable tray

Built from Plan(s)
Estimated Cost
$10
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
1. prime
2. tray: Behr swiss coffee
3. chair: Behr frosted lemon
4. seal Minwax clear stain
Recommended Skill Level
Beginner

Pallet style outdoor platform sectional (variation) with patio table

Submitted by SeanyMc on Tue, 06/17/2014 - 13:44

Saw the Outdoor sectional on your website and I just had to build it! Made some variations to the original plans, one being making it higher off the ground and the other was a necessity because Home Depot didn't have the right size wood and I wasn't about to go running around from store to store, so I used scraps to make a corner piece that fits perfectly. The most timely aspect was the sanding and removing all the rough edges. Also used Bondo to fill in all the holes that were on the outside to give it an all around smooth finish. The end result is just about the same though and the family and friends are in love with it! Thank you so much for the plans! Really could not even come close to justifying what it would cost to buy a sectional like this. Cushions were a huge concern and rightfully so. After building, I started searching and was mostly getting prices in the plus $800 range. It was breaking my heart knowing I was going to have to pay more than double what the entire sectional cost me. In the end though, was able to land some 25 x 25 x 6 cushions at Lowes for 50% off ($50 a piece).

Estimated Cost
$750 ($300 Wood & supplies. $40 paint. $400 for 50% off cushions)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Behr Premium Dark Walnut Paint, All in One.
Recommended Skill Level
Beginner

Comments

drhj84

Mon, 10/06/2014 - 08:18

I was wondering if you could tell us the model of your cushions.  I builth this over the weekend, but I ma having a tough time picking cushions.  thanks

 

 

HANLOP01

Mon, 03/16/2015 - 09:06

I love this modification. Did you use 2x8s or 2x10s for your base? It looks like you angles the back. How did you go about doing that? Thank you for posting this?! Great work!

longshot

Mon, 06/29/2015 - 18:00

nice build, when you get some time can you put up your modifications please:) would love to build this! Love the colours you used and how it looks!Me too..you cook like me, i make it my style...thats how i do my salsa ..my way i like it...

longshot

Mon, 06/29/2015 - 18:00

nice build, when you get some time can you put up your modifications please:) would love to build this! Love the colours you used and how it looks!Me too..you cook like me, i make it my style...thats how i do my salsa ..my way i like it...

tsmith@vanausd…

Wed, 07/22/2020 - 11:37

This looks great. This is exactly what I want to make. How is the height of the sectional? That's my only concern. Is there anything you would change if you were to do it all over again?

Seasonal And Holiday

Corner shelves

Submitted by Kate_14 on Sat, 07/04/2020 - 13:33

I built these beautiful corner shelves for a friend. It is a great beginner project. I used a 1x8 board but you could also use a 1x10 board. You could also build 5 shelves instead of 3. I used pocket hole joinery.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Oil I find at my local mill.
Recommended Skill Level
Starter Project

Easy Front Porch Planters

Submitted by Anonymous (not verified) on Mon, 04/29/2024 - 09:33

Easy Build DIY Planter Box with Cedar Fence Pickets

Followed these plans and made these planter boxes for the front porch! I couldn’t believe I was able to complete a project like this so quickly! Instead of paint, I opted to use some grey stain I had leftover from another project. Thanks! I love them!

Beth

Organizer

Submitted by Taa-daa on Thu, 09/29/2016 - 21:41

It's a little twist on Ana's Coat organizer. Turned out really useful and did not cost me anything since I ussed scrap wood. I wish I would build have built one for coats as well.

Estimated Cost
0
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Walnut stain plus clear coat
Recommended Skill Level
Beginner
Back