Community Brag Posts

Modified plans to accomidate a smaller eating area.  Took us about a week working on it a little bit a day.  Wood cost was about $110.  Dark Walnut stain, primer and linen white chalk paint over primer on the bottom.  

I used somebody else's design photo from this site and inserted my own numbers when figuring out the top dimensions and cuts.  I wish I could remember whose for proper credit.  Legs were completed using the ana white legs from the original plan with no alterations. 

Having a 65" TV I had to modify the plans some. This bad boy is heavy. The solid wood is all red oak, with oak plywood.

I made this without the fancy headboard, but I'm very happy with how it turned out! See my blog for complete details.

My daughter is finishing her last week of preschool. I wanted to make a small "thank-you" gift for her 3 teachers. I pieced together different ideas from ana's site and other places on the Internet. The printout is from shanty 2 chic's website. I created 3 boxes using 2 six-foot cedar fence panels. I cut mine down to size based on the dimensions of the flowers I used. Drilled a few holes on each edge and used 1/4" sisal rope to make handles. Used hemp to tie the label's to each box. Each box took approximately 15 minutes to make. Including the cost of the flowers, each box cost less than $5 too!!

Really enjoyed making this and the end result is impressive. Wouldn't categorize as a starter project because the frame is a bit more advanced.

I didn't want to drill holes in the tiles so I constructed this simple cedar frame for my daughters bathroom.

Karen
 

I saw this plan and knew that I had to build it for my home office. The top of the desk is the perfect size for my HP printer/scanner. I added the cork backing as suggested in the plan - works great for adding notes and papers to the back of the desk.

Because I am taller I modified the plan by not adding the middle drawer to the desk. This gave me the knee room I needed to be able to get my desk chair underneath and close enough that I could type. I also cut a hole in the desk top to place an cable grommet in so that I could run wires for my electronics through it. I added two pocket holes in the back plate to further secure it to the desk bottom.

The only disappointment I had was not with the design but with the stain. While I like the color, at a distance it ends up looking like paint rather than stain. I don't know if the wood was drier than normal and soaked the stain more, or if it just stained darker than I thought it would (i.e. should have stayed with one coat rather than two). But, when I'm sitting at the desk I can see the wood coming through the stain so the dual character of the stain isn't so bad.

The design is quick, simple, and easy to follow. It came together in no time.

I wanted to build a really neat table for the patio and came up with the idea to do a concrete top with LED lights and a built in cooler. I loved Ana's plans for the pedestal base and so I used her plans to create the base. I did modify the plans a bit to help it hold up the the heavy concrete top. I have the modifications listed on my blog. There is also a complete 17 minute tutorial showing how to do the concrete top.

This was my first Ana White project, I modified the plans a bit because I didn't want the 2nd stabilizing bar on the floor. I also went a bit bigger, my table is 10ft 5.5in. 

Overall I am very happy with how it turned out.

My husband built this coat rack and it is amazing and beautiful.i love it. I know the hooks look crooked in this picture but they are definitely straight.

This was my very first build ever! I enrolled in a beginning woodworking class at the local community college and our first assignment was to make a cutting board. All that was required was a super simple cutting board with some wood strips glued together then cut into a shape of some sort. But I decided that if I was going to bother making a cutting board, I was going to make something awesome and useful. I wanted to make a butcher block style cutting board. My boyfriend's only input was that he wanted something "big enough to hold a tri-tip". This was the result! It's made of PC maple and measures 23-1/4" long by 14-1/2" wide and 2-1/4" tall with the feet (1-1/4" thick cutting surface). It took me way longer than most of the other people in the class, but I love it. For this project alone, I had to learn to use the table saw, the compound miter saw, the planer and jointer, the router, an assortment of machine sanders and palm sanders available in the school's shop, the glue scraper (oh goodness I hate glue squeeze-out), and how to do clamping set-ups. At the very end, I finished it with mineral oil, and we broke it in with an amazingly delicious prime rib at New Year's ;D

I loved this bed and after making Ana's fancy farmhouse table for my daughter, I couldn't wait to try this.  It turned out beautifullly and even accomodates our three labs.  Extra support added underneathe, of course! Love it!

My son needed more room in his bedroom...and to be rid of the very girly furniture he inherited when he moved into his "big boy-ish" bedroom. At 10 yrs old, it was high time he got a bed that wasn't pink-tinged, white washed pine with 4 posters and enough curlicues to choke a forest. He also needed a desk which I couldn't really fit in his room with the armoire and chest of drawers that came with the Queen sized bed.

So off to Ikea we went and I saw a black loft bed for $300, but it was really, really high which meant I would have to cut it down and it was not sturdy at all. I looked at PB and saw the $1800 bed. Um, no - that wasn't happening. So, off to Ana-White I went and I'm so happy I did!

I built the full sized version of these plans and, to keep costs down, used wood I had on hand. This meant I had to work a bit at the cuts, but it all worked out.

Mods:
1) I modified the railings to have the ladder at the end of the bed to keep away from the ceiling fan.

2) Because I put the ladder at the end of the bed, I got very nervous about having a soon-to-be teen climbing on to a ladder secured to a 1x10 that was only connected to the side railings with glue and screws. So I sandwiched extra 1x3s over the bottom rails and attached them to the top railing.

3) I was very nervous about making sure that the bed was adequately supported so I put a 2x4 down the center instead of the 1x2.

4) I went a wee-bit overboard screwing things together to the point where it's a bit embarrassing and now I have to paint over the screw heads.

5) I made the ladder treads with 2x4's, modifying the inside spacer board cut lengths.

Because I had quite a bit of lumber on hand, the bed only ended up costing me about $90.

For the bookcase, I did end up buying the 1x12s and the adjustable shelf railings. I made the book shelf the entire width of of the bed and split the two sections based on width of the 1x24 board I bought for the desk. I only put the backer board up half way so that the daylight could get underneath the bed and make it not so cave-like.

The book case cost me about $70.

The desk was the easiest...but most costly item. A 1x6x24, 4 table legs and the table leg mounts ran me about $80. The plexiglass top that I had cut for the top cost me about $80.

Time wise, this would have taken me a lot less time than the 4 months it took - but I worked on it as I could and when I could, by myself. I got some friends to help me bring it upstairs and put it back together, but it was mostly done when I could fit in some time.

My son LOVES this and it really does give him so much room!!! Thanks Ana - I really appreciate it!

Our new house has an imposing exposed brick wall over a fireplace and mantle. To fill the big wall, we wanted to post enlarged pictures of our baby/family, but did not want to spend to money on a massive frame. Executing these plans turned out awesome. We blew up a photo, had a matte and glass cut to size, and then I built the craftsman frame to fit around everything. The framing probably would have been better/easier if I had a router to cut out an indent on the backside, but I ended up framing the photo/glass/matte inside some plain molding I nailed to the back.

Farmhouse table and benches