Community Brag Posts

This was my first attempt at building something with doors- the one on the right got knocked off square at some point and required some finagling to get it to fit. As a result, there's a gap above it, but it opens and closes smoothly. I'm okay with it. It's not perfect, but at least it's MY not perfect.

This project was very straight forward and fairly simple.  The only big changes we made to this:

-Used solid wood paneling in place of plywood.  We are now fans of using this stuff over plywood (For furniture building)

-Made the top drawer faces flip down isntead of building drawers

-Added roller catched to all drawer faces to keep the kids from gaining access

-Added a 1x4 on the back to have something solid and easy to strap our tv to

This is now our favorite piece in the whole house, very funcitonal!  Thank you for the plans Ana!

You can see more pictures at: http://gingerandthehuth.com/2016/08/restoration-hardware-tv-console/ 

Inspired by a photo on a DIY site i made this simple stool from pallet wood. No plan, just an idea, and i know that the hight should be around 20".

Build this bench for our dining room. Had some left over stuff and got a 11 feet plank for free at the lumber yard.
66 inches long, 14 inches wide and I made it a little higher, 19,5 inches.
Have a weakness for red benches :-)

My new handmade Rustic Console, made from 4x4 Douglas fir, 2x4 pine and 2x6 pine wood. This stained using leftover stain from Minwax Expresso and Special Walnut and mixed them together and created a deep golden dark brown color with made the grain texture stand out more. Then I applied Varathane Polyurethane to protect the finish. The entire project was fairly easy besides the angle pieces on the legs since my miter saw only can achieve a 65 degree cut. I ended up creating a jig to cut the angle pieces.

44in long X 15in wide X 33.5 in high

More pictures available on my Facebook:

https://m.facebook.com/Ngo-Inc-912298105544682/

Such a fun project and turned out so good. Really changed our entry space. I opted to use 1x4s instead of 1x3s on the face frames to give it a little bit of a thicker appearance. Stained with October Brown from Valspar and one coat of warm satin polyurethane.

Cody Field

I am going to be a first time Grandma and this project has been on my mind to make for him as soon as I saw it!!!
Assembly was a little tricky as I felt I needed to be sure it was very sturdy and safe. I also felt a bit out of practice as I haven't been making stuff as much as I was in the past, it may be more of a beginner level project, but I definitely needed my dad's guidance and assistance. (Thanks dad!)
I felt it needed a thicker wood for the body of the scooter so I used 1.5" wood instead of 3/4".
I am unsure on the time to make as I worked on it in the evenings after work. It did take more time than I expected, but I am super picky and wanted to add some extra touches to it.
I found the perfect monkey and bodysuit with scooters on it and that made it the perfect baby shower gift!

My son is a big Mario nut. And when it came down thinking about a new bed for him we sat down online and started searching for ideas. When we found this bed we both loved it right away. And when i found it was made from plans on Ana- white i was so excited as i have made a few projects already. My son was so happy the whole time this was being made. He was going to have his own castle. Once we finished the build he decided that he had to have a door so i made some curtains and embroidered Mario characters on each one. I let him decorate the inside with Mario stickers and he loves being able to have a Mario level right where he sleeps.

This was an awesome, quick, and easy project. The sanding, staining, and drying, took forever for me but the actual cutting and assembly was super quick. I have this on an uncovered patio and my local store didn't carry cedar in the sizes I needed so I went with the cheapest wood I could find and used a high quality oil based outdoor stain. I am hopeful it will hold up to our pacific NW winter because it won't be coming in. Considering I had never made anything before and had never used a miter saw, sander or quick square, I am happy with the time it took to finish this.

Kitchen cabinets and shelves in our breakfast nook. Our new kitchen does not have enough storage, so I’m creating my own! A matching set is in the works on the other side of the window.

My daughter found some of these online for $400+ refinished. I was able to locate some locally and did all the refinishing myself and saved a bundle. I have finished 6 of these carts to date. They are old railroad luggage, cotton bale, and whatever movers. They were manufactured around the early 1900's. The ones I have done were made by the Lineberry, Nutting and Globe companies. One piece of hardware is actually cast with a date of Feb, 26 1907. These were a lot of fun and hard work. I carefully disassembled each one including the original nails to be resused, I did not repair any of the wood, just presevered it in its original found state. As you can see from the pictures there are a lot of splits, cracks, and checks in the wood. I wanted to keep those as they added to the caracter of the table. As you can see in the before and after pics there is quite a amazing difference.

The structural elements of the "classic chair" are excellent and so adaptable.  I simply lengthened the leg to produce a conventional 19” seat height and extended the back frame dimensions to provide a higher seat back.  I also substituted 2"x4" framed seat bottoms featuring slat inserts for the plywood seat bottoms. Most of the frame materials are Doug-fir 2"x4"s ripped down to 1.5"x1.5"s.  The slats on the seat-bottom and chair-back are cedar fence boards ripped down to 2.5" wide.  

I wanted a tv/ fireplace for Christmas and my husband built this using your plans. I love it!

This was made from Anna's Farmhouse bed for dolls plan and the trundle plan. I bumped out the dimensions since my DD has a "My Twinn" doll as well as American Girl Dolls and the My Twinn is a few inches bigger.

It was hard to find bearings for the bottom of the trundle so I used drawer runners instead. I also made the trundle first then sized the bed to fit around it. I added a facia to the trundle for decoration with mitered side edges to give a "lip" to pull the trundle out.

This was my second project, made on my first project... the workbench!

I loved the Fancy Arch bed but I only wanted a headboard. I modified the plans to be just a headboard. I love the way it turned out!!!

RH Balustrade Coffee Table