Community Brag Posts
Hanging Daybed/Desk
![](/sites/default/files/Screen%20shot%202011-04-20%20at%207.35.06%20PM.png)
This bed lifts up so that my son RJ has a desk big enough for him and his friends. A large piece of plexiglass serves as a smooth service and a great place to store his music, art, and whatever he is working on at the moment.
![](/sites/default/files/Screen%20shot%202011-04-20%20at%207.34.41%20PM.png)
![](/sites/default/files/Screen%20shot%202011-04-20%20at%207.42.46%20PM.png)
Custom Bar Stools
We really liked the look of this stool with the nail heads, and we customized the stools to bar stool height by extending the length of the 2x2s to 27.5". We also bound the legs together before we started to put the stools together and sanded down the ends to make sure that they sat flush and wouldn't wobble...I would definitely recommend doing that because they are sturdy and don't wobble at all.
![](/sites/default/files/3154829107_1372038496.jpg)
![](/sites/default/files/3154829108_1372038496.jpg)
![](/sites/default/files/3154829109_1372038496.jpg)
Fancy Jewelry Box
![](/sites/default/files/Stained%20FJB%20Front.jpg)
One of my friends at work is going to a new job, and this build is her going away gift. It is a variation of the Fancy Jewelry Box, with the following modifications:
Made from select pine, no plywood is visible on the outside on this build.
Slightly smaller, the box is made from 1x6, the back is a ½” x 5 ½” craft board, and the door outsides are 3/8” x 5 ½” craft boards.
The drawer boxes are ¼” thick craft board and the doors and overlay drawer faces are 3/8” thick craft board.
Overall dimensions are 13” wide, 5 ½” deep, and 14 ¼” tall.
The select pine worked very well for the luxe stained finish I was trying to achieve.
Used fancy knobs instead of wood knobs (also swapped out the included screws for shorter ones).
I really took my time on this to get everything just so. The project took about 15 hours in total, including the build, finishing, and decorations - - a bit at a time, spread out over the last couple of weeks.
I'm very happy to say the gift was a big hit!
![](/sites/default/files/Stained%20FJB%20Open.jpg)
![](/sites/default/files/FJB%20Stained%20Drawer%20Open.jpg)
![](/sites/default/files/FJB%20Stained%20RingDrawer.jpg)
![](/sites/default/files/Stained%20FJB%20Front_0.jpg)
Pickle Washed X Table
![](/sites/default/files/image_1146.jpg)
Rustic X Console table. I extended the size to 96 inches to fill a wall in the kitchen.
Trestle table with a few modifications
![](/sites/default/files/6831B11B-D229-45F2-8A00-4A5C4D5DD66A.jpeg)
I went with a butcher block table top, 48x120”. Rostered the edges with a chamfer bit. I didn’t use the 45 braces Otis plenty sturdy. It would come through the door assembled so it was assembled in place and weighs more than any other piece of furniture we have. It seats 8 adults comfortably.
Thanks, Ana White
![](/sites/default/files/140778A2-3203-48F8-83DA-2A714C250CFF.jpeg)
![](/sites/default/files/55032422-6B58-44AC-AB65-85255980EB37.jpeg)
![](/sites/default/files/374CCC8B-929B-4342-9FC0-8DC2068AB712.jpeg)
Comments
King Sized Farmhouse Bed
![](/sites/default/files/4db50361eddc6c56b6002d47.jpg)
My first attempt at one of Ana's beautiful projects, and it turned out better than I (and my wife) could have imagined. I made this for our 14th anniversary as we have not had a bed during that time. I used Jacobean colored stain, which I wasn't sure of, but as luck would have it, a neighbor who is a professional painter drove by and stopped to check it out. He offered to lacquer it in a satin finish for free!!! and it made a world of difference. I have received several comments on how it looks showroom quality. My wife is very happy. Only problem is she now wants the Farmhouse nightstand and a matching dresser. Looks like I have many more weekends worth of work ahead of me. Wouldn't have it any other way though. Had a blast!
![](/sites/default/files/682.jpg)
![](/sites/default/files/716.jpg)
![](/sites/default/files/726.jpg)
![](/sites/default/files/749.jpg)
![](/sites/default/files/807.jpg)
Rustic Bed
![](/sites/default/files/8_7.jpg)
Farmhouse bed!!!
![](/sites/default/files/6_15.jpg)
![](/sites/default/files/4_24.jpg)
Comments
Entryway Bench
My wife wanted an entry way bench that would fit the baskets for a cube storage shelf units. Each box is 11 1/2 square and accomidates a 10 in basket. The bench is 50 inches long and and just shy of 19 inches tall. The depth of the bench is approximately 12 1/2 inches. My wife made the cushion for the top and we purchased the baskets from Lowes.
BBQ for the Grands
![](/sites/default/files/36112C17-48E4-45D0-A480-8C12CA933F32.jpeg)
My husband and I actually made four of these little bbq’s for our grandchildren and also for our own backyard. They were super fun to do. Pattern was easy to follow. Thank you Anna!
![](/sites/default/files/98D196B6-1859-4CA3-9C36-34F2215C276A.jpeg)
Comments
Sun, 12/26/2021 - 17:33
Hours of fun!
You get the number one grandparents award, that is awesome!
Thank you for sharing:)
Ledge Lovin'
![](/sites/default/files/ledges%20anawhite029.jpg)
This was my first project from a list of many...so simple, it was perfect for getting started after a long winter's rest.
Thank you Ana for the plan! I really wanted the floating shelves from Pottery Barn, but they were super pricey. I searched out the fancy hardware that PB uses to mount them and it would have cost as much for the mounting hardware alone than to buy them finished from Pottery Barn.
These shelves were an easy solution for the same look, without the hassle of having to build a sleeve to fit over cleats like other more seamless designs.
For my ledges, I chose to use 1x3s instead of 1x4s for the rear and base of the ledges. I didn't want them to protrude from the wall as far, nor did I want the rear of the ledges to be as visible (I'm wierded out by the contrast of the thick, dark line behind the pics. I would have chosen 1x2s for the back, but I didn't think it would be sturdy enough and it might be a little trickier to drill. I measured them to be a little smaller than the length of my sofa and they turned out just right. I built them in an hour or two and brought them in and stained them on my kitchen counter ( placed waxed paper underneath). It was February and too cold to do outside.
The best advice I have is to be really choosy about the lumber you buy. The "top choice," as they call it, should be renamed "crappiest choice." I guess that's what you get for cheap pine, right!
It fit just right for my budget and it was worth sifting through to make sure I wasn't getting a piece that was warped or twisted. I live in an old house and I'm sure the walls aren't exactly even (as you can see in the pic, the floor even slants a little to the right) but one of my ledges is not fully flush against the wall on one side because the board bows out a little (or maybe my wall bows in?).
Whatever. I'm thrilled with the look and love how I can display so many pics at one time. I'm thinking I want to put at least 4 pictures in each frame, and rotate them out seasonally. That way my display will go with the season. Yep, I'm a genius like that, hehe.
![](/sites/default/files/march%20014.jpg)
![](/sites/default/files/march%20016.jpg)
![](/sites/default/files/march%20019.jpg)
Full size Murphy Bed
![](/sites/default/files/3154829409_1372302421.jpg)
Used the plans for the twin bed, just added the difference in mattress size to the measurements. Pretty simple really. Used a cam lock centered above the door and a sawtooth picture hanger on the inside as a locking mechanism.
Comments
Tue, 09/30/2014 - 14:16
Would love to get the exact...
Hello,
I have been scowering the internet... I too would like to have my murphy bed raised off of the ground and be a full size murphy bed. But everytime I try to do "adjustments" and get "creative" it ends in disaster. I am better at following instructions. Is there anyway that you could give me the exact measurements for your fullsize bed and let me know how it is that you propped the bed up at the end?
Thank you.
Thu, 06/18/2020 - 20:22
I would also love the exact…
I would also love the exact measurements for a double...is there a copy of the plan for that?
thank you
boys crib
![](/sites/default/files/20150612_204711.jpg)
I've looked around for a crib for my son who is very manly, and also has a baby doll. All I could find were pink or purple or floral cribs which led me to the Internet in search of Plans to build my own. I found your site and love the crib that you built for Olivia. This is our manly version that my son and I completed today. Thank you!
Modern Farmhouse Bed
![](/sites/default/files/bed_1_0.jpg)
My version of Modern Farmhouse Bed. Let me know if you have any questions.
![](/sites/default/files/bed_2_0.jpg)
![](/sites/default/files/bed_3_0.jpg)
Farmhouse bed
![](/sites/default/files/D304BC5A-6DA7-4EE2-A10B-407612F11A98.jpeg)
I made this farnhouse bed from the plans I found on Ana’s site.
![](/sites/default/files/56594F76-4124-4494-B785-5E2254EFE1C6.jpeg)
Comments
Backpack Locker
![](/sites/default/files/locker-stained2-sized.jpg)
I made this using the single locker plans and modifying them for the size I needed to fit the landing wall at the top of my stairs. I created this for my boys' backpacks and jackets. I used pine for the sides and shelves and I used some cedar planks that I already had for the back.
I used a white stain for the sides and shelves and stained the cedar back darker to match the dark baskets I found.
I love how this turned out, and I love how easy it was to make!
![](/sites/default/files/locker-boys-sized.jpg)
![](/sites/default/files/locker-stained1-sized.jpg)
![](/sites/default/files/locker-basket-sized.jpg)
Swing and arbor
Weekend swing project
Comments
Tue, 05/07/2019 - 10:42
We don't currently have this…
We don't currently have this plan available, although I'd be happy to draw it with the author's permission.
I have linked a few plans above that could be used to create this plan. Just make sure you bury the arbor uprights underground on concrete pier posts or similar (like building a fence)
DIY Mobile Lumber Rack
I finally have order in my garage! I built a mobile lumber rack using plans from the Rogue Engineer. My husband and I knocked out this project one Sunday afternoon. It can store a huge load of lumber and best of all, it’s portable. We are very, very pleased with the final project! Storing all our lumber on the rack has freed up a great deal of space in our garage.
Comments
Sun, 06/21/2015 - 16:07
Great job!
I made one of these about a month ago after seeing it on the Rogue Engineer's website and just love it. It's exactly what we needed since we are always having to move things around in the garage. You did a great job.
Sun, 06/21/2015 - 16:08
Great job!
I made one of these about a month ago after seeing it on the Rogue Engineer's website and just love it. It's exactly what we needed since we are always having to move things around in the garage. You did a great job.
Home made bar
![](/sites/default/files/259483DD-A842-4C62-B7E0-7B423F988B91.jpeg)
Based bar cupboard on kitchen carcass plans and then made the bar front as I went . The kitchen cupboard plans were easy to follow and I was really pleased with the results. This was a real hit at Christmas a really good base for mixing and even better folks brought bottles with them !!
![](/sites/default/files/370CB989-4C0B-4651-B3F9-B76D838926CF.jpeg)
![](/sites/default/files/DE006160-8599-44FA-A35C-8053874D7321.jpeg)
Comments
Ana White Admin
Sun, 12/26/2021 - 13:29
Love it!
Such a beautiful headboard and love that you built it together!