Community Brag Posts

I loved making this! The depth and width of the treads are great. It is sturdy, safe and roomy. My little guy loves it!

When we bought new couches for our new house, we realized our existing rectangular coffee table would no longer work. We searched for larger, rectangular shaped tables in all the major furniture stores. We became disappointed in the limited selection as well as the high prices. The ones we found that could work were typically in the $800 to $900 range. I suggested to my wife that I could make something better and less expensive, which took her by surprise since I had never made anything before. That's when I stumbled unto Ana-White.com and found the tryde coffee table plans. After searching the brag post, I found where a few had modified the plans to the size and shape we were looking for. The plans and build were very straight forward and much simpler than I expected. The table came out great and fits in well in our new den with our new couches.

I made this outdoor chair by looking at a variety of plans and designs from Restoration Hardware and other stores. Check out more info on the project on my blog link. Thanks for looking!

My husband and I just moved from an apartment to a house, the first place we've ever lived with a dining room! I knew I wanted to build a really special table for us and I LOVED this plan. It seemed straightforward enough, and my stepdad had all the tools in his workshop. So my stepdad, mom, and I built the table over the course of a weekend. It was SO fun and it looks perfect in our first little house!

Love this sofa! Shown primed and in the process of painting a chocolate brown now. Super easy to make!

I built this set of furniture and tables over two full days and spent another whole day on the finish.  Thanks for your inspiration and plans to get this project from a list to something we can enjoy.  Cushions (Sunbrella) were purchased at clearance from Restoration Hardware (not shown) last year.  The plans were changed slightly for the cushions and choice of lumber dimensions utilized (4x4 cedar instead of 2x2).  That's a heck of a lot of pocket screws--the mounted jig is required for this much work.

I had a bunch of scrap 3/4" MDF, so I used that instead of wood. The result is still as sturdy but a bit heavier than if I'd have used pine, which has added to the table's stability. I added a cup holder, but otherwise kept to the base instructions with no extra mods. I put an extra thick layer of polycrylic on the top surface, to protect the MDF from absorbing any spills. This was just a test run, so I didn't bother filling any of the visable pocket holes. Given how cheap and easy this was to build, I imagine I'll end up making 2-3 more.

I needed a surface to work on all of the projects I'm building from Ana's wonderful plans!

I love how the stain turned out on this one. Super simple project!

The Ash for this table was sitting at a friends house out in a field for years. There were several 8/4 x 8' boards with various widths laying in the dirt. After many hours of planning and sanding I brought the Ash back to life. 

I had a few days a week to work on this project.  I needed to modify them by the following:

Size was 92" H x 47" W x 14" D.  I had two football helmet cases to place on these shelves and they had big cases above the standards shelf size.  The top of the case did not overlap the project.  I cut it to size.  I used Cherry Stain and did not varnish it.  I am not a fan.  One thing I would change is the wood.  I would have paid double for the premium select wood so that I know it is cut straight. 

This was my first project and it didn't turn out bad.  I never used the Kreg, but I think I became a pro after this one.  I would recommend going out and buying all the size pocket screws and have them on hand.  Also, buy the vises that you will need.  Trust me, they will come in handy.  I hate having to drive back to the store for things I should have had. 

Overall, I paid about 240 for the wood.  Since I only had the Kreg and no screws, I ended up shelling out a lot of money for the big buckets of screws and vises.  Total for the both came out to about 350, from wood stack to finish.  I would have paid more for one smaller piece at a store. 

First attempt at a project and I have to say I am pretty proud! It may not be perfect but I think the imperfections give it some character. I used a dark walnut stain and finished with poly two coats.

Really great and easy plans to follow. The only thing I would do different is replace all the 1x3's with 1x4's.

Entirely made of reclaimed wood.  Sanded with 220 on a random orbital and applied two coats of polycrylic finish

This project was so EASY and it is just what I wanted over the entertainment area. We had some So excited that it came out so well and looks great! Thank you for such easy to follow instructions!

We're in a rental and the rooms are a good size, but on the small side of good sized. Thought this would be perfect to give my 4 year old a little extra play space. I added three extra 2x2s to the guardrail, it was a bit short for my liking. Other than that, stuck to the plans. It seemed when putting together the ladder that we were missing a piece and couldn't figure where it was in the plans, but I just ran to the store so we could keep the ball rolling. We love it!