Community Brag Posts

The bed on the left is the one that I made. I used as much reclaimed wood as possible for this project. I had a bookcase that wasn't stable that had a lot of 1 x 4s so I took it apart and used them. In the second picture, I made the elephant wall art with some 1 x 2s and stapled the fabric to it. It hangs on the opposite wall. It was a fun project. (did not make the bench) I have a lot of interruptions when I build, so I am not sure about the length of time.

My first Ana white project!
It was easy and I really tried to take my time to make it look nice. Great new BIG table for my sewing room! LOVE IT!!

Stained the top 2x12's black and the legs are oops paint that are a teal color.

I enjoyed making this project! My wife loves the table and benches.

A few months back a friend of my Sister asked if I would build a bed for her 10 year old daughter. I was excited to do it! So I finished up the projects I had already started and then went to work. I had never built bookshelves before. I wanted it clean and "hole-less" on the outside, so we found a Kreg Jig and I started learning. SUPER easy!! I believe it has been painted white. I can't wait to go see it!!
I followed Ana's plans except I used 2*2s for slats and used 16" wide boards for one of the bookshelves and the desk top. I want them to be able to use this for years to come and not out-grow it too quickly.

Thank you for the plans for this fence! So many sites tell you what you need to do to plan for a fence, but don't give you any dimensions, materials, etc.

I didn't do it exactly like your instructions, but close enough to give you all the credit!! I am a 45 year old woman, with only a little do-it-yourself experience. I went to the hardware store, and asked "what are these PH screws?" and felt a little stupid. But my friend Tanya and I built this fence this weekend, with a post level, stakes and string, a chop saw, two 18v drills,a sledgehammer, a string level and a sharpie! We are so proud of ourselves.

I still need to trim off the tops of the posts, and do a few little tweaks. Also, we did not dig post holes. We used oz-posts, and pounded them in with a sledgehammer, attached the wooden posts into the oz-posts with heavy-duty construction adhesive and 8 screws, and straightened them with a huge wood clamp. And next weekend, I'll be putting in raised flower beds along the bottom to cover the lower space. :-))

We have a very big dining room in which we tought none of the store-bought tables would look good in. We needed a square table!

We got inpired by this beautiful post on Ana White (http://ana-white.com/2011/05/farmhouse-tablesquared) and soon after that starting to go look for what sizes of wood we can get. We live in an apartment, with no access to super big machinery so we needed to work with what wood stores offered us. We adapted the plan to our desire. Total cost was lower that 300 Euros, including screws, glue and stain. We are THRILLED!! :)

Turned leg coffee table from pine.  I also built matching end tables (shown in another post).  :)

Built this bench over a couple of nights. It was really easy. The most difficult part was deciding on the color and finish. Overall it came out great and looks good by our front door. The finish is Old Fashion Milk Paint in Salem Red. I painted two coats and then sanded the sides and corners. I'm contemplating adding an antiquing glaze to give it an older look.

I utilized a mix of the platform sectional and the simple modern sectional to create this piece. I added the design on the back rather than the simple 1x4. I also made the entire piece out of 2x4s and 2x2s.

I modified the width of the shelves and as you can see from the variable height of my garage one side was made higher.  

I used some scrap wook so I was able to cut expenses by about 25 dollars.  The total cost was 50 dollars not including the nails.  Although time is money.  It took me one day to draw up the modified design, get prices and get the wood and then another day to put it together.  With what I saved by doing it myself I could have made more working and buying a premade unit.  However with this said, it would not be my personal accomplishment and modified to my unique needs.  Besides, I had fun doing it.  

Thanks for your info.  It was very clear and simple.  Debbie

This was a fun project that ended up being a multi-use table! This was originally built as a small island for the kitchen but as the family grew it became a changing table! The top was purchased online at home depot, the base is made of douglas fir 2x4's and the corners accents are Simpson Strong-Tie ZMAX Galvanized 16-Gauge 2X Rigid Tie Connector available at HD for about $2 each. Thanks for looking! See more at my website analogwoodworks.com!

I made this table for a baby shower gift for my newest niece. I used the clara plan as a starting point and went from there. I ended up using (2) 2x12x36 for the top kreg jigged together and sanded them completely smooth. I used existing legs from an end table and added the aprons.

I also just shortened the cubbie length to make it short enough to fit on top of the table.

This build is a little jewelry box for a family friend who just had a baby girl named Georgia. Although I've built this box several times for myself and others to use for storage, I hadn't done a plan for it until now. This is from Georgia's Jewelry Box plan.

The wood is 1x4 and 1x6 whitewood scraps. The hinges are flat "H" style hinges from Lowes. I had them for another project and ended up not using them. The hinge color works very well with the light yellow, which I thought would be pretty for a little girl.

Originally I was going to paint or stencil her name on the front, but ended up printing it on pretty scrapbook paper and attaching with Mod Podge. Also added this paper to the bottom inside the box. Everything is top coated with Mod Podge.

On the inside of the top, I glued a 3" craft mirror (these are available in a 5-pack from Michael's for $1.99).

This was a very easy build. It look less than an hour to cut, build, and sand. The finishing I completed a few minutes at a time throughout the day, but the actual work between drying times wasn't more than an hour.

I had to make some adjustments to the size, because our new mattress is 180 x 190cm, and I had a couple of problems with the plan, it was probably me rather than the plan, but nothing that I couldn't overcome. The bed is pino (pine) purely because I couldn't get any other dry timber in Colombia, unless I won the lottery. 

The boards on the headboard panel, I pocket holed (using ordinary wood screws) as well as glued, to ensure they will not part in the future, and I used lag bolts to attach the base to the footboard.

The bed is a few inches taller than the plan, purely because my Wife wanted one of our dogs to be able to continue sleeping under the bed!

Unfortunately due to the small size of the room, the photos do not show the bed that well. The full build is on my Blog.

Now to make the night stands! 

Modified Anna White planked sideboard plan.  Made the unit smaller and changed the center cabinet to a wine rack.  This is my very first piece of furniture. It's not perfect, but I love how it turned out.  Routed the edge of the top to add detail and used a tablesaw to square edges of 2x4's for a sharper look.  Fits nicely under my husband's antique mirror.