Community Brag Posts

This was a doozy! Being only our second project ever (the farm table being our first) it took us about 3 weeks of hard work on the weekends and light work on the weekdays to complete this project. We extended the guardrails in both height (using 3ea 1x4s) and length to span the entire backside and all the way to the ladder on the front on top bunk. We wanted to be able to have a regular height mattress on each, so that if we take them apart to use as two separate beds they'd have a decent mattress on both. We also made two regular length, but extended height guardrails for the bottom to accommodate a toddler. We used the mortise bed rail fasteners from Rockler (due to the design the non-mortised kind were not an option). That took a good chunk of time. We also did 1x2 slats,13 per bed,to act as the mattress support. As with most projects, the lumber was around $200! The other was made up of sanding supplies, prep, stain, finish, safety supplies (mask, gloves) screws and so forth. I bet we spent about $40 on screws alone as we wanted to be really sure it's solid for two monkeys. It's a really beautiful piece that would cost well over $1000 if purchased mainstream.

My first wood working mallet!

Video: https://www.youtube.com/watch?v=W0njs9X5Nyg

Built this loft bed for my tween girl who needed/wanted a hangout area and has always dreamed of having a loft. It may look daunting but it's actually quite simple.  2x8"s built to size in the shape of the bed, screwed into the studs in the wall with lag bolts.  A 4x4" holds the frame up where it is not supported by the wall. I considered a pole or chain or other suspension method from the ceiling but decided that a nicely trimmed 4x4" would look nicer and it really doesn't get in the way since the ladder is there anyways.  I built the bed frame bigger than I needed for the twin mattress to accommodate free space for clutter, e.g. books, pillows, etc. Once the frame is up I added supports for the mattress, with 2x2"s spanning length and width, then plywood.  2x4"s are screwed in vertically and then topped with a flat 1x3" and spanned with a 1x2" to protect her from falling.  Since she's older I didn't feel that I needed to add as much support around both open sides.  It has not been an issue at all and I am fully comfortable with it.  I installed small LED color changing lights in the underside of the bed.  The headboard was made from standard 5" t&g boards and has a small shelf to hold "stuff."  A custom in-wall shelf holds more of her "stuff."  The wood color is just a dark walnut Danish oil that I love working with.

Finally, I built the base for the couch with 1x3". The couch itself is two separate futon style chairs that open up into single beds, perfect for sleepovers!  They are meant to just lay on the floor but I wanted to make it look more like a couch. We bought those from Walmart. I recommend!  Hope you like. Let me know if you have any questions. I don't have formal plans but can try an answer all questions best I can! Cheers!

Hello, I was looking for a unique gift for a baptism baby.I started this chair with great enthusiasm. Gradually after my job, I made ​​one mois.Du cutting the pallet until making coussins.J 'I used paint 0% solvent. I am very happy for the first time. I will now make a model adult.Conseil: Paint before because after the assembly is much more diffcile.Faire just after retouching at the screws. Start you! Thank you Ana. PS: Excus me for my English , Im french

this was a fun build had to tweak the plans a little but turned out great!

My wife loves the farmhouse style, so this was my first build based on the X console plans for sofa tables. Its very "rustic" to say the least, but is very functional and was a great project to get started.

This cute step stool is my first build from Ana's book.

It is made of macrocarpa, and finished with "teak" water-based stain by Resene, danish oil, and clear furniture wax.

I took the plans and modified them a bit to build what we were looking for. - I used 2x8s for the top of the table so that the middle board could have two removable sections that could be used for ice buckets for drinks. I made those out of plastic planter boxes. I also used 4 2x4s across the top for support.

The last major change is that i used corner brackets and bolts or screws to attach all the pieces. I liked the industrial look it gave the table and benches.

Everything was sanded down and finished with a drift gray stain and seal.

The building part was easy, but sanding and staining prior to putting it all together is what took most of the time. It was probably an hour of cutting, an hour of building and the rest was sanding or staining.

Just love your site so many great ideas

I have used one of your cooler plans to create this one of a kind piece. Love your website - Thank you !

This was my very first build, and I'm so pleased with how it turned out! I decided not to add the X pieces because I didn't want the table to look too rustic. I did add clavos for an extra touch and I love it!

Added front to the drawers using the scrap 12x1 and feet on the bottom for maximum leveling

This was my first project using plans on this site. It was relatively easy and a joy to complete.
Everyone loved it!