Community Brag Posts

This was my first project using Ana's plans. It's a combination between the smiling mudroom and the shoe shrine altered to fit sneakers and boots. I was very happy with how it turned out and couldn't wait to get on with my second project which was the planked sideboard. We were doing renos at the time and I was able to build the closet organizer before enclosing the closet. That thing is never moving.

Made media center for new TV / speaker from Jen Woodhouse design I found on Ana White.  Turned out well. Changed some aspects to fit my situation.  I changed some of the joinery, and used a 12 inch piece of pine on the back to allow for stability and ample space for cord management. I used three hinges due to weight of the front and put some corner cushions for grandson's sake (toddler).  Most items bought at local home improvement store but index card holders bought on ebay for very reasonable price.  

Here it is. Our first building project (not attached to a wall) that we used plans for:) I am so happy with the way it turned out. We had been looking for a bench for months. I was thinking that I would find something I like, refinish it and then upholster the top. But then I came across this post from a wonderful blog (that I will be using TONS more ideas from) and knew that this was going to be our bench:) I am happy to say that I think I have finally found a hobby that we can ALL get use to:) The kids have fun, we have fun...and we actually walk away with a finished piece! Love that!

I bought my daughter an American Girl doll for Christmas and was very excited to make a few items to go with her. My first project was a kitchen with a sink and a stove. I plan to make her a fridge too, but haven’t had time yet. I looked around online at plans for a child’s play kitchen and kinda got ideas for the doll kitchen.  Most of my inspiration came from this play kitchen from Ana White.

I really liked the look of the kitchen island in the plans, but we needed something longer, so I added 2' to the length, an extra drawer, and some supports in the center (worried the shelves might sag otherwise). We also wanted an overhang for stools, so I added a foot to the width and some decorative corbels. For the top we used reclaimed bowling alley wood. A really fun project and were really happy with it. Thanks for the plans!

Like many others have mentioned, I wanted a 36" high table so I could use it as a bar. Ana mentioned that it would be too wide at 15 degrees so perhaps 10, after busting out some trigonometry I found that 10 degrees would give you about a 16" base and 15 would give you a 24" base. So, 12.5 degrees it came to be if you want a 20" base.

Many have said it takes 4 2x2's, that definitely holds true with this modification.

Here are my measurements, otherwise the cuts and assembly are the same as the original:

All angles are now 12.5 degrees rather than 15.

The legs are 33 3/4" from end to end

The outside edges of the legs should come to 20 1/4" wide for the base.

The stretcher will stay the same 13 3/4" on the bottom length, just cut at 12.5 degrees.

The stretcher is now 7 3/8" up from the ground, I found it was easiest to measure 7 1/2" up along the inside of the legs and line the bottom of the stretcher up at this mark.

And that's it!

A tip I used was clamping 4 2x2's together to get all the legs even, this only works if you have a sliding compound miter saw. I also recommend doing the straight cuts first and then leave the saw set at 12 1/2 degrees until you finish the project, this will keep cuts consistent.

Other modifications I made were to shorten the depth to 16 1/2" and use 2x6's for the top, I needed a narrow table in the room. I also made the depth of the sawhorses only 15 inches so the top would have a 3/4" overhang in front and back, I think this cleaned up the look some.

I decided to go with Oak boards for the table top for a little more durability.  Simply fastened together with dowels and glue and clamped to dry.  Then I added extra supports to the bottom.  The top looked a little thin compared to the base so I added the accents pieces out of 1x2 for a table skirting of sorts.    

Loved the design when I saw it and jumped on it the minute my husband said we needed something under the wall mounted tv! Took us 5 or 6 hours on a Sunday to put the cabinet together and another day for my husband to build the doors which turned out exceptionally well!! Used pine with a dark stain followed by Annie Solon old white chalk paint and clear wax giving it a nice aged look. Will be looking for 16 x16 bins for some grandkid toys and a few spots for pretties. Ordered hardware on Amazon and had to re-order additional set of wheels as the kit comes with only 1. Thank goodness I have prime 2 day delivery!

My wife loved the Benchwright table at pottery barn, and I did not love the price. Got a lot of ideas from this site and tried to make it my own. The outside and legs are made from 5"x5" Cypress, purchased from a local saw mill. I used a kreg jig on the entire thing along with lag bolts and glue. It is very heavy and I can jump up and down on it. Bought the hardware from Fastenal. Fun project, took about 16 hours total.

Addition of chalkboard paint to the doors to label contents. My mother-in-law loved this for X-mas. 

I made them in brown and black

My 7 year old daughter LOVES her new loft bed!!! It was a fun build. Plans were very accurate and simple to follow. Took a weekend to build and about 5 nights to paint.
Next I plan on building a desk and some shelves under the bed. More pics to come!

My wife loves this shelf. Thank you so much for the plans! I made mine using Aspen and an Early American stain. Now I need  to make 2 more. 

Some small modifications to Ana's design... My grandaughter loves it!

I used the Clara Table design then decided to make the table top into a lego table. I bought (4) Lego Plates from Target at $15 each. Then super glued the Lego Plates onto the tabletop.

*** Note- Make sure that the spacing between Lego Plates is correct. I used different Lego's to connect the different plates to make sure that the spacing was correct.

Thanks for the ideas Ana!

This build was for my daughters.  They needed a new dresser and I figured I could pull this one off.  

I used regular boards from the Big Blue Box store.  I went a step up for the birch playwood because it would take paint better.  The drawer pulls are stainless steel.  

I modified the given plans so that I could add two more large drawers.  I made a few modifications to pull it off and give the dresser more support.  For example I added some supports under the top plywood board and in between each row of the drawers.  You can see that I added a middle support under the bottom set of drawers as well to keep the weight of the drawers from saggin in the middle.  I also had never installed drawer slides before.  This was way harder (and frustrating) than I was expecting.  My drawers don't have slides but they still work well.

All in all this was a moderately challenging build for me.  However, the paint and finish ended up being super nice.  My girls love it and I think it is going to last for a long time.  I am now working on modifying these plans to build a matching side table with drawers.  I hope to have pics of that soon as well!