Community Brag Posts

I have a tiny house and for additional storage I've been drooling over building this for a good long time. I finally got some extra money that I could dedicate to it. Having to have a major surgery at the end of last summer I knew I couldn't do a garden because of how every day I didn't know how I would feel. I did know that I could work a little at a time when I felt I could and get as much done as possible on a shed. By the end of the summer I had an awesome shed thanks to Ana and her plans. I had to do my own research for the base and how to sit it on the ground. I chose to dig 2 trenches in the dirt, put small gravel in and put 2 pressure treated sleepers to rest my bottom deck on. I also primed the plywood floor to try and help with less moisture through the different cycles of the year. Checked on it last week to put the Christmas decorations away and dry as a bone inside and all looking as good as I had hoped on the outside.

This took a lot of time. Many nights and weekends. We used a grey stain and poly for the planks and white paint and poly for the trim. I had to remove the under bed storage because the mattresses we bought were very thick so it was modified a little. Also I added some additional support to each side with another 2x4 because I felt it wasn't sturdy enough with just one support on the stair side. I also included a full roof with cedar shingles so that one of my twin boys doesn't jump out. They are 3 year old maniacs.

Barn Door Console with mango wood top.

Built off the Ana White plans with a few bespoke adjustments.

I had so much fun on the first entry table I built, I decided to build another one and add a side table to it. I had enough extra wood around the garage to make my weekend filled with fun and building.

Definitely need a square for the nightstands!

Thanks for these great plans. I was able to knock out the project in about two weeks with some late nights thrown in. For the siding, I went with weathered gray ship lap paneling instead of the 1x material. I think it turned out great!

Stained with Cabot deck stain, mahogany flame

These plans were the perfect little end tables for my "sitting area" in my kitchen. I went out and found scraps from my pile in the shed and only had to buy one 1x3! With my kids I rarely have time to do a project in one day. I measure one day, cut and sand another, and then build another. These babies sat unfinished by my couch for a couple of months, and I FINALLY finished them! Yea! I love them! It is my first attempt at painting furniture and distressing, it's not perfect, but I am happy to have a little more confidence! I love the tables! Thanks Ana!

I was inspired to build an airplane shelf for my son based on the plane old shelf design, and I've always liked WW2 era p-51 Mustangs. So I thought I'd give it a shot. I built this design out of mostly 3/4 plywood scrap. I glued 3 pieces together for the fuselage and routed out the wings for a rounded look. I then thought it would be cool to add some LED lights. That got me thinking, if I added enough lights underneath the wings he could use it to read books at night. There are 12 lights underneath and it seems to be very bright. The prop spins thanks to a few washers and a long screw. Most of my cost was tied up in LED lights since I used spare parts and scrap wood. It took me at least 10 hours to build as I had never tried to build something like this and experimented along the way.

I used melamine for the top and shelf to get a nice surface for working on

This tower plan was perfect for re-using some already stained 1x12’s I had from another project. It fills up that little square of unused space at the top of the stairs, and gives us extra storage for towels and TP for the 3 bathrooms in our house. I substituted 1x2 and ¼” plywood for the door and used some 1x2 and 1x3 to attach and build it in. This project has been up for a couple of months now, and has come in handy. This was my first attempt at doing something as a ‘built-in,’ and it gave me confidence that we could do our next big project (the pantry) as a built-in. Since the side and shelf boards were already stained, once it was assembled the finishing was easy- all I had to do was stain the trim boards to match, and paint the door and the inside.
Thanks for this great plan, Ana! I’m planning to build several more of these, for my sewing room.

Inspired by both Ana's Industrial Closet design and the Sliding Mirror Cabinet.

Making maximum use out of a small space, bought a mirror from Ikea and removed it from the existing frame, everything made in virgin wood from DIY store. Two tier clothes rail to separate big coats from other clothes, two height shelf system to accomodate sloped ceiling. A lot of fun to make!

Based on a combination of storage bed plans on this site and bit of imagination, we built this wonderful corner bed for our daughter. It took some time to get the measurements right (we had to convert everything to the metric system since we live in Europe) but it turned out great.

Although the bed is in the corner right now, we made the cubby holes on the side facing the wall anyway, just in case we want to move it to the middle of the room at a later date. For now, we just placed the corner board in front of those.

Thanks everybody for the wonderful plans!

This was our first project from Ana-White. I had a coffee table which I loved, but I inherited it from a dumpster years ago (great find!) and time finally caught up to it. I decided this time around I didn't want to spend over $300 on a "rustic" coffee table that everyone has. So my boyfriend and I decided if we were going to have a table that others have, it might as well be unique in the sense that we made it!

We split the time in about a 3 week period (we both work full-time so time in our house is at a minimum). We bought the wood, cut it, and used a Kreg Jig to start putting it all together. We had some trouble with perfecting the X's (as you'll see) as our saw didn't quite hit the angle. But we managed to get it done.

The most time consuming part was sanding, sanding, and sanding some more. We went with the oxidization finish which was kind of a pain... we probably will never do that again. The outcome wasn't all that much better than regular stain. Then we used poly on the top instead of wax so it would be more durable.

This table was inspired by one from Restoration Hardware. It was constucted using Fir and black pipe fittings from the local hardware store. Please check out more pics on my blog (I had trouble uploading them here due to file size). Thanks for looking!