Community Brag Posts

I wasn't very experienced when I built this table. It was only my second big piece of furniture (farmhouse bed was my first) and it was the first time I had every used a compound mitre saw, which my husband had just bought for my birthday. We had no dining room furniture, so I made the 2 benches to go with, until we could set aside money for the ever so expensive dining chairs. (We'll keep one bench for sure for the kiddos!) My seasoned carpenter husband was so impressed when he came home from out of town to find this table done just in time for the holidays. I love it so much and am very proud of the finish since it was the first time EVER I had used stain or poly. We did order materials for the stretchers, but haven't put them on yet. They were from Fastenal and are pretty pricey - but hopefully, they'll give the industrial touch to finish it off. The whole project took me under 2 weeks - but it would take far less for someone who is more skilled and doesn't have to stop every 5 minutes to tend to 2 very active toddlers.

First furniture project with my Kreg Jig. Went smoothly. Loved the plans and how descriptive they were. This is a great beginner project. It only took me about 2 hours to complete.

Thanks for the plans!

Curly maple blanket chest with teak top for daughter’s Christmas.

Project took a lot more time and patience than the last few little ones that I have done. I like the simple outdoor table but wanted a little bit more. I used the basic concept and mixed it with a patio table from PB that I really enjoyed but didnt want to pay $800 for. The table looks fantastic and am still debating on what type of finish, if any, to use. Hoping to make the matching bench soon for one of the sides of the table.

I have wanted a swing bed for ages and got hubby on board with this. We built a full size bed (plenty of room for me and all 3 grandkids!) using poplar. I had the turned dowels from a major score at my Habitat Store several years ago. $2 per dowel! I wanted an old fashioned look and so added the corner brackets to all sides and the resin appliques on the back.

I primed with cream colored ceiling paint, an "Oops" paint from my neighborhood home improvement store. The baby blue was another "Oops" paint - another score- only $5 for a gallon of Valspar eggshell. After a very light distressing, I finished it with a paste wax.

I make the design and drawing and Hubby makes all the cuts. I joined all with biscuit joinery for a strong and solid piece.

We hung it from the ceiling joists with 1" manila ropes, added lots of pillows and plants and it is my happy place. A night blooming jasmine adds a heady fragrance that puts me right at peace ... A great refuge from a crazy work day!!!

Took a canopy bed plan but made it to look like a house for my grandson.  

He loves it! 

Child's chair. I used wormy maple

I made this table out of a free pallet. The legs are cut off of an older scraped table and then I used poly with no stain. I used 1x2 furring strips in between slats to make tabletop solid.

This was my first attempt to use real power tools and make furniture. After being inspired by Ana, I purchased my Kreg Jig and got to work! I needed a coffee table so I tweaked this one to fit my needs. I ended up staining it with Minwax Gray, but it wasn't rich enough for me. So I took white, black and brown pain and dry brushed it to give it that old barn wood look.....OMG I LOVE IT! It came out perfect. So much better than in the photos even! Thank you for the inspiration Ana.....What will I make next???? Hmm......

We built this outdoor table and benches using Western Red Cedar for a patio area outside our house.   The cedar is pricier than doug fir or other woods, but is highly rot resistant and the best choice for an outdoor table.  We used Ana White's 4x4 Truss Beam Table and Benches plans and Kreg blue kote screws since they are weatherproof.   The breadboards were a little wobbly, so we reinforced them with black metal corner braces (http://www.truevalue.com/product/Hardware/Miscellaneous-Hardware/Corner…) and black coated exterior screws (http://www.homedepot.com/p/Everbilt-12-x-1-1-4-in-Phillips-Flat-Head-Wo…).   These braces provide a cool architectural look and provide much needed support for the table ends, and especially the bench ends.    We stained the Western Red Cedar with Minwax Weathered Oak and finished it with two coats of Man O War Spar Urethane in Satin finish.   Hopefully it will stand up to the elements and last for years to come.   Thanks for the plans Ana!

I wanted to contribute a plan but unfortunately I'm still learning how to use Google Sketchup. However, here's a brag post in the mean time! My husband were asked to replicate a display table from Hollister Co. and this is what we came up with. :)

Modified the plans for a full size mattress, also used 2x6 lumber for the main frame. Installed LED strip lighting around the perimeter for a night light. Also built my own headboard, modified for the full size. I used laminate flooring for the center inlay.

Fun project, about 6 hours to build, total cost around $200 with the lighting.

I saw the plans for this nightstand and loved it! It was exactly the piece of furniture I was looking for to use as an end table. I decided to stain the top and paint the bottom. The outside is a greenish-teal color and the inside is a light, fun yellow. I also submitted this project to Canvas Corp Brands' Blog and they published it! See the blog post here: http://blog.canvascorpbrands.com/diy-end-table-painted-with-tattered-angels-paints/

Easy project, I really enjoyed making this and it looks great! I used MDF for the shelves and finger jointed poplar for the rails. I work in a lumber yard so the materials and tools were readily available. I recommend for all levels and again really enjoyed making it! Hope you enjoy my first post!