Community Brag Posts

First project of yours that I built. Came out so much better than I expected.

Brazilian walnut flooring top from lumber store and pine everywhere else. 

Fancy Jewelry Box it came out very nice. Made with white oak.

I build Anna's version of this popular store's headboard. I love it! Cost includes wood and paint. I would have used poplar for the entire bed but my hardware store only had 2x2s and 2x4s in white wood.

We built this table for some friends and the build went great!

She brought over a table leg so that we could try to compliment their existing stain colors. I used "American Walnut" when maybe I should have used "Special walnut". It turned out a little reddish and I'm worried that she wont like it. I think it's beautiful but I'm so nervous!

What do you think about the finish?

Inspired by the Narrow Cottage End Tables plans. Tapered the legs a bit at the bottoms. Added a bead to the top and bottom of the drawer front. I finally used a 100 year old board salvaged from a barn in Tennessee that suffered a fire - giving the white oak a great dark patina. There is a shop in Orange County, CA called True American Grain that sells reclaimed wood - I bought the board for $40 - it adds a lot of character to the finished project.

It's my first woodwork project and I went ahead on building a slide with a playhouse underneath. Took some of the ideas from Ana's playhouse deck plan. It took me awhile to figure out how to build the slides and steps though. The project is intended to cater for my 1 year old daughter. As you can see, the playhouse is not "there" yet as there's no wall surrounding the structure beneath the slides (there will be some soon enough). As this playhouse will someday be put under direct sunlight and heavy rain, choice of wood takes into account the tropical weather that we have here in Malaysia (I might have to put some heavy coating on that Meranti though).

Dimension wise it's a 4'X4'X4' structure with 1.5' steps attached at the side. The railing are about 1.5' high.

This was my first build! I combined 2 of Ana White's plans, the King size Farmhouse bed with the Queen size storage bed, I didn't do drawers as the cubbies worked better. So this was a nice merge of two of the plans! LOVE LOVE LOVE our bed, and the 2 tone stain/paint combo.

Rustic X Coffee Table done in American Walnut. Top was planed and joined for smother surface.

Bathroom had a huge mirror. Looked like it required 2 men and a small boy with proper tools to remove it. So a riff off the vanity plan covered 2/3 of the mirror and made for a much nicer look.

My daughter loves her new bed, thanks Ana!

The plans were well thought out and very easy to follow. I did make a few changes/modifications that others might want to consider.

I used select pine boards to cut down on the amount of sanding necessary prior to paining, however that boards have a fairly sharp edges. Because this is a kids bed and play area underneath I rounded off all the edges with a 1/4" round over bit in my router. I love how it turned out!

I also added two 1x3 supports to the long 1x2 top back rail. I did this for two reasons, first was the 1x2 seems a bit saggy and didn't seem like it would hold up too well to my 6 year old up there. Secondly, it match the front rail nicely. Speaking of the front rail, I also changed the vertical supports from 1x4s to 1x3s. The 1x3s match the 1x3 posts and look much better IMHO.

When I built the ladder I was struggling with the gaps left by the 1x3 stair treads when I placed them in the 1x3 sides. Finally I decided to use 1x4 treads, again rounded over with a 1/4" bit. These larger treads overhang the 1x3 sides by about 1/2-inch and look very nice.

Finally, instead of screwing the ladder to t 1x8 bed frame, I bent 5" corner brackets into a "J" shape and attached them upside down to the top of the ladder. The upside down "J's" hook over the top of the 1x8 bed rail and allows the ladder to be easily removable yet is still securely attached to the bed for use.

Found 120 year old mahogany hardwood flooring at The Old House Society that provided the table top. Built the subframe and legs per the standard plan. Then attached a 3/4" ODF plywood deck. Strip hardwood was nailed to the top with 1" finishing nails thru the flooring tongues. Cleaned the hardwood, applied 2 coats of shellac and 3 coats of satin polyurethane. The modification to use the strip flooring was the most tedious to get a tight fit. The antique, aged and stressed flooring gives the table a real antique look. Build time was @ 8 hours. Applying the finishes took several days of drying/curing before use. My wife loves it and I am proud of the final project.

So easy to build and soooo functional. The plans include both the bench and the shelf, but I just didn't have any room for the bench or I would have built that too.

My wall was too short to fit the original shelf, so I modified this to work with the space available. It's about 10 inches shorter and only has two cubbies.

This is a great starter project.

Easy bench to build with my son! added double legs for more stability, just glued two together and followed all directions.