Community Brag Posts

We used the Fancy X Farmhouse Table plans to create the table then stenciled the game boards onto the sanded tabletop with a pencil.  After that we scored over the pencil tracing to prevent stain bleed over, then carefully polyurethaned over the sections we did not want stained.  After the poly dried we used a small craft brush to paint the stain in one color at a time.

X coffee table

Once I saw these plans on here, I was thrilled to get started on them. I let the girls do most of the miter saw cuts (with lots of supervision) and they were a huge help sanding. Pine has really sharp edges, so they helped me round down every edge by hand. I would have used an electric sander, but *gasp* I couldn't FIND IT!

Aaargh!

Anyhoo, this is a gift for Daddy for Father's Day! I bought enough wood and fabric for a matching chair for myself. :) The girls are begging for matching kid-sized ones too. :)

I just LOVE how it folds up so flat (last photo below) to be hung under cover outside. :)

I used Connecting Bolts & Connecting Cap Nuts rather than just bolts and I love them!!! I did keep a washer in between the 1x2's to keep the wood from rubbing. PERFECT fit! Check out my last photo below to see it up close.

The bolts fit through the 1/4" holes Ana's plans instruct you to drill, but the caps need a larger hole. I drilled 3/8" holes into all OUTER 1x2 where the connector caps needed to be and kept the inside 1x2 holes at 1/4" per Ana's instructions. Hope that makes sense!

Then I finished them with Rustoleum Oil Rubbed Bronze Spray Paint.

Decided to build a bedroom set and like the Rhyan end table, but fell in love with tiled version. So we used porcelain tile on top.

I had some left over Walnut wood, so I decided to make some more Beer Tap handles.  This is a fairly simple DIY that doesn't take that long to complete.  I have already written a full tutorial on my blog:

This was my first ever attempt at making something real out of wood. I've only made some really basic floating coat hangars and docorative rustic pieces to set around peoples houses and a spice rack. I really wanted more of a challenge and this was a perfect place to start. I had to purchase the Kreg Jig and a couple of large clamps but once I got the hang of drilling and filling pocket holes it was smooth sailing. 

The Mrs then finished it off with some lovely rustic baskets and a serving tray with all the latest Southern Living magazines.

This is the first building project that I've tackled and it's all thanks to Ana-White. I did lots of things different than the building plan but it was definitely my inspiration and extremely useful. I loved the Restoration Hardware table and so I went to the local store to put my eyes on it for myself. Some of the things that I noticed, liked, and included in my design are; I used 4-2x12"s for the tabletop, I used 2x8"s as the breadboards, I used 4x4"s for the legs as well as the side stretcher, I used 2x4"s as the undertable supports, I built two 15" extensions using 2x8"s and 2x2"s, and I attempted to distress the wood yet stain it to match our dining room as best as I could.

www.tommyandellie.com

I've documented the build and you can check it out yourself at: http://tommyandellie.com/?p=14

I've revised the plans with even more details here; http://tommyandellie.com/index.php/2012/01/13/new-and-improved-farmhous…

Hope it helps.

I love these plans! I build a reading loft tree house for the kiddos that they love... and I might love even more.

Modified from the original plans to make it longer and thinner to fit the space/need.  

For the "X" cuts I just built the frame, clamped on a rough length of 2x2 and drew lines where the cuts should go.  I ended up cutting those by hand since they were well over 45 degrees.  Next time I will make a jig for my miter saw to handle those angles.

Finish is just vinegar and steel wool.  The picture with the clamps is before the top coat was applied. Once the poly was put on it gave it a nice gloss and nice, rich colors. 

Now it just needs some decorative pieces sitting on it :)

I love this table and bench set! Very easy to build and didn't take too much time. We made it a family build. My kids helped put together the benches and table. My wife and kids did all the staining.

Inspired by Ana's Farmhouse Bed plans, I built this dog bed for my Jack Russell. I measured and planned for it to comfortably fit two standard bed pillows (in waterproof covers of course!). She loves it!

well after I made my daughters bunk beds my toddlers were begging and begging me to make them a bunk bed so this weekend I decided to make a toddler bunk bed. So here it is and I'm here to share with you all.

Hi Ana,

 Here are a few more pics of some tables I've built! I would love to know what people think!

Thanks!

I made this buffet, serving table to go with a large gathering farmhouse table I made. I loosely used the farmhouse table plans but did some designing of my own based on a picture my friends had of what she wanted.

i made this a while back, but just got through painting it. Saw it was a great table for drinks, will serve a double purpose.

Well, one thing's for sure. Follow Ana's plans and everything will come out just right.

Oh. And another thing. I can't get my kid out of this bed! It's awesome. And really simple to make.
Thanks, Ana!

This was produced from the Queen version by adding 16 inches to the width of several of the pieces of wood.

I followed the X-table plans for the base and then went a little nutty on the table top. I also beefed up the bottom stretcher on the base as I felt it complemented the 4x4s used for the feet well. I left off the diagonal braces as I liked the contrast of the beefy legs and stretcher and the open airy appearance between the base and tabletop. There were several blogs/ideas on Pinterest about a Chevron style table top. I took pieces from all of them for my design. The table measures 99.75 inches long by 41 inches wide. I thought being a quarter inch under 100 was a bit quirky and did it merely for that reason. Oh and please forgive the photo bomb by my daughters. I could not take a picture without getting at least one of them in the frame. My oldest is being a little silly in the pic trying to show the detail of the Chevron design--or split Chevron as I'm calling it.