Community Brag Posts

We saw this cubby bench and thought it could work for us... but there's 5 of us.

So we redrew the plans to add two more cubbies.

I also like the idea of being able to hide everything, so we put doors on.

The issue I had was cutting 1x12 material with the chop saw. Cutting with the circular saw (even with a guide) can sometimes leave you with an "almost" square edge. Even with a 12" saw you can not make the cuts on a 1x12. You need a sliding saw for that.

One option is to cut the boards over sized by 1/4 in and then use the table saw to get a square edge with the miter gauge or rip fence.

I only worried about this due to putting doors on the cubbies. It's your using baskets you don't have to be so exact.

I made this garden bench for my niece's 3rd Birthday. She loved it!

I was able to use wood that had been leftover from past projects. I only had to buy a few boards. The paint was largest expense.

The most difficult part was the arch. I did that by bending my ruler along some finishing nails.

These chairs were really fun to build. This was my first project and they turned out great. Thanks Ana!

Pork and Bean Wall Storage

John

I did it! My hubby cut all the wood for me because the saw still scares me, but I assembled it!

I’ve been hoarding my scraps for the past six months or so hoping to build this as soon as possible. I paid roughly $34 for it!
Everything but the 1”x8” drawer face and the project panel top came from my scrap pile. My aunt and uncle’s renovation dumpster provided the missing 2”x4”s. There are nail holes, dings, and some general bruising, but who says that’s a bad thing?
I omitted the piece of trim beneath the drawer to allow more room for storage on my shelf. I absolutely love my island, and as usual Ana's plans were flawless!
You can see details on how I built and finished on my blog here: http://lovelyweeds.blogspot.com/2014/02/island-paradise.htmlit
Thanks for taking a look!

Used Ana White's Husky Farmhouse Table plans/instructions and then made some of my own modifications to make the legs removable and expand the dimensions a bit. Turned out pretty good! This was my first project :)

This was my first project so I stuck mostly to the original plan. The only change I made was to make the width 16 1/2 instead of 15 1/2 to fit the pad. I was going for a driftwood finish to match the crib we got.

 Love all of the projects on this website. I am just getting in to woodworking but am loving learning all of things that I can do with these wonderful plans. I used all 1x2s for my fruit and veggie crates since they didn't have what I was looking for here at my lowes. Kind of limited on lumber around these parts unless I drive an hour away. A good sanding and these crates came out great. Smooth and stylish!

This was not built using one of Ana's plans. I have a book of 2X4 projects that my daughter gave me and actually got me started woodworking. This beauty was one of the projects. It was easy to build and easy to put together but not easy to paint. The lattice was the cheapest she could buy and was "furry". I tried sanding which took forever but it was still a mess to paint. I am including the link to the plans: http://woodtools.nov.ru/projects2/WoodPlan/lattice-bower.pdf
If you build this be sure and sand and paint before putting together-it's so much easier.

It looks amazing in her backyard and she is loving it.

Well this is a project I made from plans from this site and we love it ! Is my first peace of furniture I've ever made and I think it was Farley easy my wife saw the pictures and ask me if I would make it & I was like I'll try and it turned out beautiful everyone who's seen it love it very sturdy actually it was completed right on time for thanksgiving day. I want to thank Anna and whoever posted those plans we love our big table and matching benches : )

This was my first project after buying a miter saw. I used 2 inch screws to secure the back to the ledge, then nails (I think 2 inch?) to secure the front lip to the ledge. I then covered the nail holes with wood filler, painted with a white glossy paint that I had on hand for my house's trim, and secured into the wall with anchors and screws. 

It was a fairly easy project and I used the cheapest wood found at home depot (each ledge literally cost less than a dollar for the wood). It did take me several hours but considering it was my first project, it was pretty fast. I'm sure someone with more experience could knock these out in 1-2 hours! It was a lot of fun and I can't wait to build something else. 

I started with your basic plan but i slightly modified it with out the overhang too much and added a set of doors and covered where the seating would be. But it still has room for two seats .. I made mine rustic :-)

Saw this plan and knew I had to make it. This is her first BIG GIRL bed. Her reaction made it all worth it, "Daddy I am going to sleep in this bed FOREVER!" We stuck with the hinged storage under the first two steps but turned the space under the top step into a little closet for her dress up stuff. We also strung rope lights in the playhouse section for added fun lighting.