Community Brag Posts

Created this as a gift for my uncle. I recycled an old pallet for the material. I used his birth date to create the ammunition shell specs and his name as the manufacturing company.  I found the vintage hardware on eBay and added a sliding shelf inside.  Lettering was created with stensils and spray paint. I distressed the lettering to match the vintage feel of the piece. 

Our local youth built a nature play area on our church grounds for local children. Jack was 16yo and he worked together with Geoff 85yo to build this bench for parents to sit on while their children play.

davechamberrs777

I absolutely fell in love with the Tall Corner Media Console the moment it was posted. We had a decent corner stand for our TV, but it was low and was hard to watch when kids and adults alike were constantly saying "I can't SEE!" or "You're in my WAY!". I've learned that explaining "you make a better door than a window" over an over to a 7yo and a 4yo only takes longer.

Two dilemmas faced us:
1 - Which comes first, the chicken or the egg? DH insisted that we needed a big screen tv before building the console. I insisted that we needed the console first, so that we would have a place for the tv. Since it was determined the that console was cheaper than a tv, I won :)

2- What to color it? Paint? Stain? I was the one building, so DH said he didn't care, but that he liked the idea of staining. Having never stained before I was a bit intimidated - paint was my safety net. DH got this one, but only after I made him choose the stain.

I have the doors built and they are in the garage. With other things in the living room we wouldn't be able to open them all the way anyway. That and my final build weekend topped out at 105+ deg - and I was DONE being outside :) All in all, i like the open look of it, although I reserve the right to install those doors if need be.

This project has been one that I've been putting off for a while now. My wife was threatening to just go out and buy one so I figured it was either now or never! Our little girl loves to help in the kitchen and standing in one of our old wobbly dining chairs just wasn't cutting it anymore.

I knew that I wanted to build something that would be more like an heirloom piece of furniture instead of one of the cheap knockdown types that you see in stores. I am sure that I could have possibly come up with my own design, but Marc already had already come up with a good design in the arts and crafts style, which is my favorite style of furniture. I saw no reason to come up with a "new" design just to say I did, plus I was lazy, and Marc already had plans hahaha. In all honesty, I think sometimes as woodworkers we get in our own way trying to be "original", when at this point, it's pretty much all been done before.

This is my first project and I am so happy with it! Thanks for the plans!

You can see my step by step process here:

http://ordinaryhappilyeverafter.com/blog/category/table/

I'm especially happy with how I was able to attach the top to the bottom without drilling through the top. I describe that here:

http://ordinaryhappilyeverafter.com/blog/2012/08/my-table-is-done/

Thanks for the inspiration!

Built this from a couple of the plans on here and ideas I have seen around the web. This is the very first project I did and with plans from Ana White I found it pretty easy to get through the whole thing. I built this to be bar height and now that it is done I might cut it down to be regular table height just because I didn't realize how big it would actually be. But first I will build a couple chairs and a bench to go along with it.

I needed more room, so I changed the dimensions to a 4 x 4 table.  Used the same amount of materials.  I made the side leg measurements 48" wide and the cross braces 45".  My top sheet of plywood is 48" x 48" and the bottom sheet is 48" x 41".  The rest of the leg measurements are the same. 

A little overkill on the screws, but made it extra sturdy. 

I saw this site, copied down the materials list, bought everything I needed and was finished before dinner.  I did it all myself, only had my husband cut the plywood, the rest was all me!  Woo hoo, so proud of myself!

I rough sanded the edges and corners to get rid of any splinters.

Built my wife a bench and coat rack for our mudroom also a bench for garage. 

I think I Iove this bed more than my little girl. It's really a beautiful bed with lots of storage. I put magnetic closures on the insides of the cabinets to hold them closed. I also put the same applique on the headboard as Ana. I looked for a different one, but it's the girliest we could find at the time and my little princess loved it. It's a very sturdy bed. I put a week long project, but again, as I've stated before on other posts, it would probably not take nearly as long if you have help with the building or especially with the kids! When you have to stop every 5 minutes and take care of kids and home, it takes a little longer. All the building mommies out there know exactly what I'm talking about! Thank you so much, Ana, for all you do and for all of the empowerment and motivation.

I've been collecting small flat rocks off the road every time I take the dog for a walk. Unfortunately my grout cracked, I probably used the wrong type. Anyone who can tell me what I should have used instead? Suggestions very welcome, as I might try this again.

This was my first woodworking project ever - and am thrilled!! Thank you Ana-White.com!! I needed a beautiful china cabinet for a fraction of the retail cost. Once I found plans on this website, I bought some power tools and got started! I only worked a couple of hours each weekend so it took a while to finish.

I modified the Shanty sideboard and Shanty hutch plans in a few ways: Shorter overall width to more comfortably fit my dining room, shorter height (which I now regret), fewer shelves in the hutch, different method to attach shelves, and added glass doors to the hutch. My shelves were not perfectly flush with the cabinet walls (oops) so I couldn't use pocket holes to attach them. Because I detest traditional shelving hardware, I just secured 1/2-in quarter round to the walls and rested the shelves on that.

For the glass hutch doors, I built frames similar to the sideboard doors' frames -- two frames for each door, for a total of 8 frames. On 4 frames, I used a rabbit router bit to create an inset for the glass I bought and had cut at Lowe's. I secured the glass with glazier's points and silicon caulk, then attached an un-routered frame to the back of each door with screws. I chose to keep the screws on the back visible and accessible so that I could easily replace the glass if needed without destroying the door.

Modern Outdoor chairs. Great plan that I’ve wanted to do for a while. Very easy to execute the cut list and plans as written.

Followed the plans for junior loft bed

I love the legs on Crate&Barrel's Boardwalk Bench, but I was on a tight budget (under $10), so I needed to make many modifications so that I could use the random pieces of wood I had accumulated from my local deconstruction warehouse, including free wood louvers for the slatted shoe shelves. If you'd like to make your own, more photos of my process are on my little blog: http://sunnysideup-stairs.blogspot.com/2014/05/boardwalk-shoe-bench.html

http://www.backyardchickens.com/a/connies-coop

I built this and posted it on 6/8/15 on backyardchickens.com and it has been "pinned" a few thousand times since then...