Community Brag Posts

DIY Pet / Baby Gate

Michael

My wife wanted matching bookcases for our library rather than the hodgepodge collection we had assembled over the years. We looked at several different options but the trick was getting them to our house in a cost and time effective manner. We came across the Willy Bookcase plans here and, after pricing the wood vs. pre-built options, decided to strike out to build our own bookcases.

The library took 5 McMansions, 1 Highrise, and 1 3-Bed/2Bath bookcase. We liked Ikea's Billy corner bookcase set, so we purchased a corner bookcase bracket from them to create the effect and stabilize the Highrise between two McMansions.

We decided to do the entire length of the bookcase sides with shelf holes to allow for maximum flexibility in spacing of the shelves. We fixed the middle shelves across all units to match the top of the short 3-Bed/2Bath.

The simple design made the project simple overall - a single bookcase is an easy weekend project. Since we decided to use stain with wipe on poly, finishing took the vast majority of the time (four hours to cut, sand, and build, 44 hours to finish...) Purchasing a good shelf pin jig and making consistent measurements is a necessity for mass producing shelves with consistent spacing on the shelves.

This was an awesome, quick, and easy project. The sanding, staining, and drying, took forever for me but the actual cutting and assembly was super quick. I have this on an uncovered patio and my local store didn't carry cedar in the sizes I needed so I went with the cheapest wood I could find and used a high quality oil based outdoor stain. I am hopeful it will hold up to our pacific NW winter because it won't be coming in. Considering I had never made anything before and had never used a miter saw, sander or quick square, I am happy with the time it took to finish this.
 

Not the prettiest but extremely effective. I think my entire kitchen will be all Ana White by the time I finish….what an inspiration she is! Thank you!

This is the 3 box storage daybed, as you can see I added an armrest on one end as it sits in a corner.

Tips for building this project: Buy a decent circular saw, I used a cheap one and really regretted it. Square your timber, I ended up squaring my timber using a sander, which wasn't as easy as it sounds. Check you measurements, the bottom of one of my boxes was a little short because I didn't double check the measurements and I ended up having to fix it with an extra piece of timber. 2 or 3 saw horses are a real help and lots of clamps.

I used the cutout outline from the link below but had to convert it all to metric since I live in Sweden, also a standard single mattress here isn't as wide but longer then the one used in the linked project. I didn't take this into account and ended up having to buy an extra piece of plywood.
http://ana-white.com/2009/12/plan-stratton-daybed-as-request-by-you.html

I got the single mattress and the pillows from IKEA.

This was a lot of fun and I look forward to spending many hours relaxing on my new daybed.

I used pallet wood to create a completely different look for this project. The frame and some of the trim pieces stayed the same, but there were a few edits made to support the pallet top, sides, and shelf. In addition, the drawer design changed a little bit to allow a false front instead of the inset one from the original plan.

More info in the link below!

Created this as a gift for my uncle. I recycled an old pallet for the material. I used his birth date to create the ammunition shell specs and his name as the manufacturing company.  I found the vintage hardware on eBay and added a sliding shelf inside.  Lettering was created with stensils and spray paint. I distressed the lettering to match the vintage feel of the piece. 

Our local youth built a nature play area on our church grounds for local children. Jack was 16yo and he worked together with Geoff 85yo to build this bench for parents to sit on while their children play.

davechamberrs777

I made this armless outdoor sofa using scrap teak and Ikea cushions.

This project has been one that I've been putting off for a while now. My wife was threatening to just go out and buy one so I figured it was either now or never! Our little girl loves to help in the kitchen and standing in one of our old wobbly dining chairs just wasn't cutting it anymore.

I knew that I wanted to build something that would be more like an heirloom piece of furniture instead of one of the cheap knockdown types that you see in stores. I am sure that I could have possibly come up with my own design, but Marc already had already come up with a good design in the arts and crafts style, which is my favorite style of furniture. I saw no reason to come up with a "new" design just to say I did, plus I was lazy, and Marc already had plans hahaha. In all honesty, I think sometimes as woodworkers we get in our own way trying to be "original", when at this point, it's pretty much all been done before.

This was our first build alone. I've helped my dad build various things through out the years but was this first time me and my husband built something together.
The bed plans were great and it went together easily. We couldn't find untreated 4x4 posts so we went with two 2x4 sandwiched together, and then we bolted the headboard posts to the footboards. The side rails are plywood trimmed with 1x3's and topped with a 1x2. We also used L brackets to attach the side rails to the head and footboards and addition to bolts on the headboard and 2" screws on the footboard. We needed to assemble the bed in a way we could easily disassemble because we are moving soon.

Two year old is being evicted from the baby room by the baby and we decided to build him a big boy bed using the Kentwood Twin Plan. Used only pine and the mattress is supported by slats. The bed looks great and is incredibly solid. Thank you for the plan, Ana.

I needed more room, so I changed the dimensions to a 4 x 4 table.  Used the same amount of materials.  I made the side leg measurements 48" wide and the cross braces 45".  My top sheet of plywood is 48" x 48" and the bottom sheet is 48" x 41".  The rest of the leg measurements are the same. 

A little overkill on the screws, but made it extra sturdy. 

I saw this site, copied down the materials list, bought everything I needed and was finished before dinner.  I did it all myself, only had my husband cut the plywood, the rest was all me!  Woo hoo, so proud of myself!

I rough sanded the edges and corners to get rid of any splinters.

Built my wife a bench and coat rack for our mudroom also a bench for garage.