Community Brag Posts

Farmhouse Counter Stools

Submitted by wbengle77 on Wed, 09/23/2020 - 09:09

This was a pretty strait forward project, the only change i made was the wood used. I did not use the 2x2 furring strips i opted for the upgraded Select Pine Boards. So it changed from 3 bucks to 12 a board. I also used metal nylon feet.

Built from Plan(s)
Estimated Cost
depends on wood and finish
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I used an antiquing wax, then I used butcher block oil and wax to finish.
Recommended Skill Level
Starter Project

Comments

Teacher gifts from soda crate caddy

Submitted by bhoppy on Wed, 12/19/2012 - 20:17

I loved how these little crates turned out. I used scrap wood that I've had for so long..It's 2 different kinds of wood though which is why I painted them. I ran out of 1x6 boards so I used a 1x12 for the bottom. I hope my daughter's teachers will like them. I filled the cubbies with various little things like candy and Christmas ornaments.

I made the coffee table earlier this year and love it. It holds so much and it's filled to the brim with toys.

Estimated Cost
crates free table $120
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
crates leftover paint. table minwax ultimate stain and satin poly 3 coats
Recommended Skill Level
Beginner

Narrow table hack

Submitted by Sneezy14 on Sun, 09/28/2014 - 19:17

I combined the Narrow Farmhouse Table plan with some changes and Bluedinosaurs tutorial for making a sewing table. http://bluedinosaurs.com/diy-platform-sewing-table/  It came out beautifully!

Thanks for the great plan!!

Built from Plan(s)
Estimated Cost
$260.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Paint and polyurathane
Recommended Skill Level
Beginner

Farmhouse table

Submitted by Anonymous (not verified) on Sat, 01/14/2017 - 13:49

2x4's and 2x8's kept my cost way down! The top was finished with minwax provincial stain and a few coats of minwax polyurethane to finish it off. Joined with my Kreg jig throughout. A very fun project!

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
minwax provincial stain and polyurethane. white satin paint
Recommended Skill Level
Intermediate

Farmhouse Cubbies for Tots

I don't have a mudroom so I needed better organization for shoes, coats, and whatnot. I wanted it to match the Farmhouse Barn Door Entertainment Center I built, so I used the same paint and stain. My sizes were a tad smaller than most storage boxes, so I had to custom-build the cubby boxes. I added a rope around the whole perimeter as well as felt on the bottom to prevent scratching. The kids love it!

Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

Memorial Bench with Inset Tiles

Submitted by gdgoodwin on Fri, 10/25/2024 - 07:55

This is a Memorial Bench for my mother who loved collecting Arizona/Southwest tiles.
I used my router to clear a recess so that I could inset the tiles in the back (two 2''x6") of the bench, as well as the top of a re-purposed old table. I used HD Construction Adhesive to attach the tiles as well as grout to fill in the differences in tile sizes.
I finished it with Olympic Clear Sealer. - G D Goodwin

Built from Plan(s)
Seasonal And Holiday

$55 Fancy X Desk

Submitted by momoflilgs on Sun, 12/23/2012 - 18:59

We recently purchased a foreclosure on thirty-five acres and have been diligently rehabbing the property. (That's why the picture shows missing wall trim and unsealed floors!) We needed a desk in order to reclaim our dining table so I decided to build this one. I love how it turned out and it is perfect for our needs.

Built from Plan(s)
Estimated Cost
$37
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I used a jacobean and cherry color mix. (We're trying to use items we have on hand.) I wanted a dark color since our house colors are very light. I then used bees wax for the top and buffed it off.
Recommended Skill Level
Beginner

Attic Closet Wall

Submitted by mom of 4 on Thu, 10/02/2014 - 22:06

Our attic bedroom had no closet space or storage. I designed a system with shelves and hanging space along one end wall. A freestanding vanity table was discovered at a Habitat ReStore, which fit the space perfectly. One side of shelves is for clothing, the other side is for books and display. A long shelf across the entire top serves as the closet rod as well as display space.

Estimated Cost
I think it was around $100 for the plywood, screws, etc. I purchased prefinished plywood, so I could just cut and run.
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Farmhouse king bed frame

Submitted by Anonymous (not verified) on Mon, 01/16/2017 - 16:43

Lots of pocket holes

Estimated Cost
$175
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Cheap white semi gloss, still turned out nice
Recommended Skill Level
Beginner

Parson Work Desk

Submitted by Anonymous (not verified) on Fri, 10/02/2020 - 16:33

Built for a small office at work. Finished in their favorite color! Beautiful pieced together oak top

Built from Plan(s)
Estimated Cost
$150
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Clear poly top and semigloss orchid purple paint
Recommended Skill Level
Intermediate

Comments

Low Profile Shiplap Fireplace with LED Accents

Submitted by Anonymous (not verified) on Sun, 11/03/2024 - 12:03

Dear Ana,

I was absolutely inspired by your fireplace shiplap wall project. After pondering a couple of years to get started on it, I finally brought it to life.

I wanted a rather thin design so I modified it to my taste creating a depth of only 7” inches (2 x 3 1/2 studs). Included a cutout frame for a soundbar and added rear LED lighting.

Very proud of it! Thank you for the motivation, your plans and guidance.

Cheers!

Ron

Kreg Jig work bench with with a twist (fish cleaning table for the beach)

Submitted by wlfpkhack on Wed, 12/26/2012 - 12:17

My inlaws were building a beach house on the coast of NC. After years of going to the beach for family vacation and always renting houses that had water access and boat access, but no where to clean fish when we would return from the pier or boat, I decided to embark on a mission. I was introduced to the Kreg Jig work bench plans and felt that I could adapt this plan into what I wanted to do. I used all pressure treated lunber (including the plywood) and stainless steel fasteners. This did increase the cost, but was necessary for the intended location. I purchased a slab of cutting board material from USplastics.com (24" x 48") and glued and screwed it to the plywood bench top. I then mounted a bar sink and faucet for cold water access and it can either be set up on a dock to drain directly back into the water, or a 5 gallon bucket can be placed below the drain, obviously it could be piped to the drain system of the house also. It came out great. Father in law loved it, and I can't wait to see it get good use.

Estimated Cost
$200 includes the cutting board, sink and faucet
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Wood sealer
Recommended Skill Level
Beginner

Farmhouse Table for our New Home

Submitted by Smokeydog on Tue, 10/07/2014 - 07:50

This is my second table which I built for our new home in the Olympic  Penninsula. Moved closer to our kids when we retired.  It was wonderful to have our kids, their spouses and friends gathered around the table for dinner, conversation and laughs.

Estimated Cost
275.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax wood conditioner and satin cherry stain.
Recommended Skill Level
Intermediate

Comments

Custom 9- Foot Rustic Buffet

This was a custom build for one of my clients in San Diego, CA (Encinitas). She wanted a 9 foot buffet to store all of her kid's toys in :).

 

We came up with the design, and I built it right before my wedding (probably my most stressful build! haha).

 

 

Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Jacobean by Minwax, Clear Satin Poly
Recommended Skill Level
Intermediate

Grant Secretary Desk

I never got around to building the top hutch section, but my wife loves this desk.

Comments

Handmade Rocking Horse - Brag Post!

Submitted by Anonymous (not verified) on Mon, 11/11/2024 - 16:08

 

I’m old bloke 85 been retired over 20 years now and widowed found plenty of time on my hands so made a rocking horse for a friend about 15 years ago it sorted of snow balled from there now I’m up to no.35 and couple still in line I use pallet wood  - Bob

Playhouse Loft Bed

Bed built off of plans. For one person this was a big job to finish in 3 days, but I was able to get it done before Christmas.

Estimated Cost
$400.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Paint
Recommended Skill Level
Intermediate

Comments

Stephanie Blake (not verified)

Sat, 12/29/2012 - 08:19

My 6 yr old recieved this bed for Christmas as well and we decided to let her choose the paint colors. This looks great with the purple and white! I love it! I showed her this picture and she likes it too. :)

New Island

Submitted by Anonymous (not verified) on Sun, 01/22/2017 - 15:34

I doubled the size of the shelves for more storage and made 2 drawers instead of one.  Loved building this and your plan.  Don't think it turned out bad at all for my first time. This looks great in my new remodeled kithcen and all who have seen it love it and are amaze I built it myself. Thanks for sharing your plan. 

Estimated Cost
$125.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
In the plans calling for 1 x 12, I just made two and joined before adding the 4x4's on other side for seating. Paint is white oil base for outside and top is Summer Oak with a matte finish poly (2 coats).
Recommended Skill Level
Beginner

Comments

Simple Bed (twin size)

Submitted by giorod82 on Sat, 10/10/2020 - 15:42

Simple twin bed project. The only modification I made was to shorten the height of the head board to the same size as the foot board.

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Red Mahogany
Recommended Skill Level
Beginner