Community Brag Posts

I tried to make a similar sand box as yours but as space was limited I decided to only make a 1 seat version.  As a first attempt of making something proper I think it turned out well.  Base frame is made of 4 x2s and the lid and seat contruction it pallet wood planed to make it nice and smooth.  Granddaughter loves it.

Rustic table plans with slight modification of the width and the legs were mounted differently for a little added flair. So many finishes to choose from....

I altered the plan a little - this is 40" square.  I edge-glued planks for the bottom level, so I had them sit on top of the aprons instead of inside them.  Note: if you have top and bottom aprons attached to the legs before you put the bottom in (that will sit on top of the apron and not within), you can't get it on in one piece...oops. :) The most difficult part was the herringbone - figuring all the dimensions, cutting everything precisely, getting all pieces to fit, and finding a way to attach it to the framing boards and support in underneath.  I love the table, but I'm very frustrated with the finish.  It's so blotchy, and I tried to do everything correctly to prevent that (see info on the finish).  With every project I learn a few things...

First attempt at a project of this size. 7 middle, armless sections, and 4 corner/end sections. Increased the height of the backs and gave them a slight recline. Didn't have the effect that I wanted. Learned lots of lessons over the course of the month or so I was working on this. 1. Spring for the premium boards instead of the terrible ones you have to pick from for the common boards. 2. Use a stop block on your miter, and cut all your boards before starting assembly. Uniform cuts save lots of frustration. 3. They make outdoor use pocket screws. Who knew? We will see how long the first couple of sections hold up over time. 4. Stain REALLY doesn't stick to glue. Seriously, not even a little. Watch the over application and sand if it you have to. 5. Cushions are EXPENSIVE! 6. I HATE finishing. My wife stained the last 7 pieces.

Taking a break from building for a bit. It's summer, and I'd rather spend it at the pool than  sweating it out in my 100 degree garage. 

I loved the bed by plan, and now love it more that I have built it.

Sandbox with lid, painted first, then assembled. I had originally planned to alternate the colors on each board, but partially assembling it into the 5 large pieces and then painting made the process much more manageable.  

First large build I did by myself. Took a long time because I pre-drilled for every screw. Gave this table and bench to my brother. Made new table in hours- no need to predrill except for the 1x4 on the bottom.

I made this dresser for a young lady who has never had any furniture unless it came from IKEA. Time to mix it up a little.  She was very delighted. The bulk of the dresser is poplar plywood with decorative birch trim.  I had trouble matching the paint color she wanted so I experimented by buying paint as close as I could find to the shade of grey she wanted and then mixed it with paint I had in the shop until I got the desired result.  I'm  no master at mixing paints.  I simply got lucky.  I traced out the decorative top using my wife's China serving platter and then routered the edge. Turned out OK and my wife was none the wiser.

This bench is the first project I have built from Ana White's plans, and I love how it turned out! The cutting list and instructions were very easy to follow. The most difficult thing about this project was the staining and painting, which I admit I have never been great at. I built this bench because my fiance and I needed additional outside seating on our patio for a party we threw, and I literally built it the day before! A week after the party I gave it to my fiance's daughter who wanted it as an indoor hall bench for her house. At first I was sad to give it up, but I figure I can easily make another! Thank you so much, Ana, for the fabulous plans you provide!!

Dog bowls made from scrap wood!  Super Easy!

Pretty happy with how it turned out. Will take our 4 year year old a bit to get comfortable with the ladder. Wish our room was long enough to add the stairs. Good plans though and thank you Ana White for making them available online.

This is a combination and a scaled down version of a couple different farmhouse table plans. It is 60"x43" to fit our dining room. I integrated an inlay looking piece into the top with a 1x2 and mitered the corners of the outer two layers. The thickness at the edge of the table was accomplished with 1x4's with the middle layer inset by 1/2"... chairs to match are in the process of being built.

Modified the arm rest and the back to my liking. 

Used the plans to build a custom tv Console for a customer. Black Cherry stain with HTP top coat. Added support pieces under the shelving.

Child's adirondack chair. I made it mostly with wood scraps purchased at my local Habitat for Humanity Store