Community Brag Posts

A smaller version of the original plan, intended to be a nightstand for our bedroom.

My 15 month old needed a new dresser and a place to put his changing pad as he outgrew the changing table with rails but still fits on the pad itself. I stained the drawers dark to match his existing crib. I used plywood for the drawer faces and attached 3/4 inch square poplar as pulls. I wanted an integrated look and the bonus is that my son has a harder time getting a good hold to open the drawers. I used the plans for the three drawer dresser but omitted the face frame because I wanted to cut costs (I used poplar not pine or else it would not have added much). I just made the plywood wider and I added some stabilizing pieces in the back.

I made one fairly major change. When I was buying the boards, I noticed the store sold a panel of joined wood that was just a bit bigger than the final table top was going to be for just a couple dollars more.  My kiddo likes to write and color, so I figured a smooth-topped table might make sense.  I could have cut down the panel, but as it was only a few inches bigger (36x20x1) I modified the design a little bit instead and just made the cross beams a little longer.  My only concern is that the large panel won't drain water as well as the the four boards in the original design, so after I painted the stencil (I got a die cut machine for Christmas, so suddenly everything needs a stencil...) I applied 4 coats of spar urethane to the top and two coats everywhere else. We'll see how it holds up.

This was my first build...in fact, it was the first time I ever cut something with a saw. This was very easy and came out better then I ever imagined. I did some modifying because the original was way to big for the space I had planned for it. I also could not get ahold of a 4x4 that was not treated so I glued and screwed some 2x4's together to make my own. This was so much fun, I plan on making my sons toddler room and new living room furniture. I took pictures of most of the steps so if you want to see them, send me a message. Happy building!

Wanted to give my great-nephew something handmade for his 2nd birthday and hopefully something he can enjoy for years to come. Spent the weekend with my hubby doing this and loved every minute and thrilled with the final outcome 

I present the "Castle Loft Bed" with minor modifications. Finished in a "Frozen" theme.

It was time to upgrade my youngest to a "big kid bed" and she was insistent on a frozen bed. After searching for various options we settled on the "Castle Loft Bed" from the Ana White catalog of plans.

We left the slide off, due to available space. Also we changed the steps to be more of a usable toy box/storage and hamper area. I also modified the internal bookcase to have a small "secret" cubby for her "valuables". We also added color changing LEDs to fit the little princess's mood.

I hope you like my rendition and keeps in spirit the DIYers quality.

Followed plans with slight modifications:
1. Made shelves deeper but narrower
2. Used 3/4" Birch Plywood for all
3. Built no base just mounted to floor & wall
4. No drawers just shelving

This was my very first project, and it was so easy thanks to Ana's plans.  I bought a few tools that I didn't have already - Kreg jig and miter saw - and things went super fast from there.  I found cushions at Ikea that fit perfectly, and were cheaper than making them myself.  I just hope they last!  I used cedar for the sectional and storage table, and stained them a dark brown.  I used deck stain as suggested by a Home Depot employee, so that the stain and waterproofing was all in one step.  I have received tons of compliments on this set, and people still can't believe we build this ourselves!  Thanks, Ana! 

...onto the next project...

I changed the plans some. I started with a large pallet crate used to transport train windows.  So with the used palletwood i had to put the boards in sideways and pockethole screwed them together. With going on the cheap iwent with a 1x4 and 1x6 top so i could use the pallet wood. I ended up torching it with a torch to bring out the grain  and it looked good with the rustic look of table.i plain to eventually clear it when ohio weather permits. I only had to buy i 8 foot 1x4 and 1 8 foot 2x2. Have less then 15 dollars 

Our daughter has just recently gotten into playing dress up so we were looking for storage for all of her new dresses and accessories. This tower was the perfect solution. We used a mostly MDF and some plywood we had left over from other projects to help keep the cost down. We added a mirror to one side and 3 hooks to the other side. Very pleased with the result!

I improvised on this a bit.  I envisioned being able to put small items on the shelves at some point so I made it with solid shelves instead of all 2x4's.  Except the stuff I bought for the shelves was so flimsy I had to add the support pieces. Ahh, well.  I'm learning.  And with the three support pieces (2x4's cut to size) running widthwise, it turned out to be a solid shelf.  LOVE this site!!  Thank you again, Ana!  Next project is a bathroom vanity.

Made based on a picture i was shown,and used the kids andarondac plans on this site

This is the first project my husband and I have made. Funny enough, it was suggested in the directions to not do this as a first project. We had already gotten the materials and our minds were already made up on building this media console. We just took it one board and one nail at a time. Sometimes we would take one step forward only to turn around and take two steps backwards. We learned A LOT on this project. Needless to say, we loved working together and building our own furniture... We will be building more for sure!

This was such a great project and not too complicated for my first large one.  I loved using the milk paint to create the old world distressed charm.

I built this 7 months pregnant and couldn't be happier with it. The plans were excellent and easy to follow. I was intimidated by the hard ware at first but that was also very simple. Overall very happy with this project build.