Community Brag Posts

I utilized a mix of the platform sectional and the simple modern sectional to create this piece. I added the design on the back rather than the simple 1x4. I also made the entire piece out of 2x4s and 2x2s.

I modified the width of the shelves and as you can see from the variable height of my garage one side was made higher.  

I used some scrap wook so I was able to cut expenses by about 25 dollars.  The total cost was 50 dollars not including the nails.  Although time is money.  It took me one day to draw up the modified design, get prices and get the wood and then another day to put it together.  With what I saved by doing it myself I could have made more working and buying a premade unit.  However with this said, it would not be my personal accomplishment and modified to my unique needs.  Besides, I had fun doing it.  

Thanks for your info.  It was very clear and simple.  Debbie

This was a fun project that ended up being a multi-use table! This was originally built as a small island for the kitchen but as the family grew it became a changing table! The top was purchased online at home depot, the base is made of douglas fir 2x4's and the corners accents are Simpson Strong-Tie ZMAX Galvanized 16-Gauge 2X Rigid Tie Connector available at HD for about $2 each. Thanks for looking! See more at my website analogwoodworks.com!

I made this table for a baby shower gift for my newest niece. I used the clara plan as a starting point and went from there. I ended up using (2) 2x12x36 for the top kreg jigged together and sanded them completely smooth. I used existing legs from an end table and added the aprons.

I also just shortened the cubbie length to make it short enough to fit on top of the table.

This build is a little jewelry box for a family friend who just had a baby girl named Georgia. Although I've built this box several times for myself and others to use for storage, I hadn't done a plan for it until now. This is from Georgia's Jewelry Box plan.

The wood is 1x4 and 1x6 whitewood scraps. The hinges are flat "H" style hinges from Lowes. I had them for another project and ended up not using them. The hinge color works very well with the light yellow, which I thought would be pretty for a little girl.

Originally I was going to paint or stencil her name on the front, but ended up printing it on pretty scrapbook paper and attaching with Mod Podge. Also added this paper to the bottom inside the box. Everything is top coated with Mod Podge.

On the inside of the top, I glued a 3" craft mirror (these are available in a 5-pack from Michael's for $1.99).

This was a very easy build. It look less than an hour to cut, build, and sand. The finishing I completed a few minutes at a time throughout the day, but the actual work between drying times wasn't more than an hour.

I had to make some adjustments to the size, because our new mattress is 180 x 190cm, and I had a couple of problems with the plan, it was probably me rather than the plan, but nothing that I couldn't overcome. The bed is pino (pine) purely because I couldn't get any other dry timber in Colombia, unless I won the lottery. 

The boards on the headboard panel, I pocket holed (using ordinary wood screws) as well as glued, to ensure they will not part in the future, and I used lag bolts to attach the base to the footboard.

The bed is a few inches taller than the plan, purely because my Wife wanted one of our dogs to be able to continue sleeping under the bed!

Unfortunately due to the small size of the room, the photos do not show the bed that well. The full build is on my Blog.

Now to make the night stands! 

Modified Anna White planked sideboard plan.  Made the unit smaller and changed the center cabinet to a wine rack.  This is my very first piece of furniture. It's not perfect, but I love how it turned out.  Routed the edge of the top to add detail and used a tablesaw to square edges of 2x4's for a sharper look.  Fits nicely under my husband's antique mirror.

I used Ana's plan for the Clara table and the $4 stackable chairs for this project. I spent a total of $30. I used furring strips to save money. My kiddos love it! You can see more details at http://www.shanty-2-chic.com/2011/08/table-and-chairs-for-the-playroom… !!

built this a few months ago, but just now getting around to posting it. I could'nt have ever even came close to building something like this without ana. So thank you.

In our new home there was a 46" wide coat closet at the entrance. My wife wanted a place to sit down, take off shoes and put our coats and backpacks when we were home. I found Ana White's plans for this shoe bench and modified it to fit our space. The project took 3 days to complete due to the painting, staining and polyurethane, construction of the bench itself was quick. Previously I added a light switch and two 3" LED recessed lights in the ceiling. The project came out wonderful and I am very pleased. Thank you for the inspiration!

-Mike

This was my second project from the site. I wanted somewhere to read my book on the back deck. This chair is perfect. When I get tired of reading I can lay it down and take a nap. It is very sturdy and easy to put together. I do recommend using pocket holes to assemble it. I found it much easier.

Just in time for Fall Mums, I wanted a set of sturdy planters that I knew would hold up in the winter. I wanted to try something that felt more 'simple' to me than the pattern I was inspired by.

I used some 2" wide pine so they ended up quite heavy, but I know they'll hold the test of time.

It was quite an easy project, and I encourage anyone to make their own. It took me only a Saturday once I got going. Painted them the next day... then done!

Enjoy the details here --> http://projectjumanji.blogspot.ca/2013/08/homemade-decorative-planter-b…

We built this from a 4 x 4 left over from another project and 2 - 4 x 4s 36" long from a pallet I rescued from work.  The middle post is 78" long with 3 feet buried in the ground.  The "Fancy Iron Hose Holder" was purchased from Amazon for about $20.  The post cap was a used one rescued from my husband's woodshop.  We layed out the 4x4s on the garage floor and screwed them together, added the hose holder and end cap, and spray painted the project black.  I am going to remove the hose holder and paint it a different color so it will stand out better.

My vintage table collapsed, so I built it new legs using the farmhouse plans. I didn’t want to lose the expandable leaves however, so I decided to reuse the top and add a second trestle so the table can still expand. I sanded and restained/polyed the top and leaves and cut a space in the center support to hold the spare leaves. I’ve never seen a table like it and I’m very proud.

Probably one of the most popular plans, and possibly my favorite...maybe I am biased because it was my first Ana build. Being my first Ana build, and my first carpentry project in several years it took a little longer than I hoped. Mostly nerves I think, and the fact that I am a perfectionist...what others may call picky =0) I really enjoyed building this piece, frustration at times included. It was great to be back in the shop after so many years of apartment living and no space or tools to speak of. A word of caution - once all my hard work was done it almost didn't make it out of the basement, not enough clearance. I was ready to shorten the legs but thankfully after some careful pivoting and ingenuity (my father in laws, not mine) it found its home in our bedroom...and I couldn't be happier! Having been 1 of 4 girls in a high school house carpentry program full of boys it is so inspiring to see so many women building, creating, and loving every minute! Thank you Ana for all you do!

I designed and built this sectional for some friends, and then wrote a how-to about the process! There are free plans for it, and a time-lapse video of it being built at http://www.iliketomakestuff.com/outdoor-sectional/