Community Brag Posts

I tried to repeat the Vintage Bar Stool project from ana-white.com, modifying it to my place dimensions. I'm gonna use them on the balcony which has rather high fence, so the table you can see on photo is higher than the average table. So, the stool should be higher too. And than I saw the Vintage Bar Stool project and desided: here ir is!

You can visit my blog to see some photos of the process of the making these stools. Pls. note that English is not my native language. The blog link leads to the page in Russian.

Following Brooke of Killer B Design's How-To blog post, I built and painted some woodland animal stools for my first handmade business collection. Please visit Brooke for her How To here: http://www.killerbdesigns.com/toddler-sized-animal-stools-a-how-to/

See all 4 stool designs I made on my little blog for a few more design ideas: http://sunnysideup-stairs.blogspot.com/2014/07/woodland-animal-stools.h…

Happy and safe building! :)

I had to convert Ana's plan into metric measurements using 90x35mm timber available in my local hardware shop. Painting was done pre-assembly and was the most time consuming part. It is not perfectly angled but am happy with the final result.

I built it for my husband, but had to make a shorter version, only 52" instead of 72" to fit it into the corner.

What a great project! I went all out with it, spending much more time and money than a sandbox probably deserves :) but I wanted something similar to the colors on our house.
Since we have humid summers, and much of the wood wasn't pressure treated, I sanded, primed (2x) and painted (2x) after cutting. I also changed the base to a 12" wide board rather than 8" to make it deeper. . . changing this one aspect doesn't effect any of the other instructions or measurements. Because of the primer and paint and paint supplies, the project cost about $150. But the kids love it and are in it every day we are home!

Custom kitchen island with a butcher block top. Hammered antique drawer pulls. 

I located an 11ft piece of cedar 5 inches thick and 21 inches wide. The first thing I thought was to splice it and make an outdoor dining table....but realised i could get some distance out of this and decided to start with a coffee table. The tryde coffee table was the inspiration to get this made. It was a weekend project that was done while my 2 year old took his afternoon naps. My wife loves it, so managed to score some brownie points with this one. It didn't take too much to sand, a quick skim with 60 grit to get rid of the major splinters and saw scars, then an hour or so of 120 grit. The legs are s4s cedar 4x4 posts with s4s cedar 2x4 supports. I don't have too many tools so used a band saw at my neighbours workshop to quickly rough out the joints. once all pieces were cut and sanded, it was assembled with glue and held in place with multiple bar clamps and cured overnight. The top was assembled the next day with glue, sanded in place and stained / urethaned on day 2. A fun project for a novice like me.

I created identical sides and then added the ladder afterward. I modified the plans to create a triple bunk.

toy storage ,cable t.v and spot lights inside with dimmer switch.

This is a bay window standalone desk. The desk has an enormous top and fits snugly into the bay window. It did not have to be attached to the wall. There are four pieces in total: the top, 2 base units and a support that spaces the desks at 36" and further secures the top.

The base unites are built from the File Base Classic Wall Storage System and the top is glued up 2x12s that were planed down and straight edged.

This table is 78 in which is shorter than the plans. I think it turned out great!

DIY Cooler Stand

My family is expanding, which means more laundry! (I am 39 weeks pregnant now) So I decided to build a big enough hamper for us (two adults, one toddler who constantly dirties his clothes). For finish, I tried to mix two stains "weathered oak" and "dark walnut" and I think it came out really nice! I must admit I love my new hamper!

This was an easy build...until I got to the drawers. This was my first time building drawers and they took FOREVER to get right. I did not account for the extra width that the paint would add, so my drawers that once fit did not after I had it painted. Ended up sanding it all down and starting over. Now I know to put the slides on, then paint around them. I added height to the are with the baskets to accommodate their size as well as clear an outlet behind the dresser. The plans do not have the top cover the back panel, so I moved it back slightly to cover the edge. This made the front look too shallow, so I added 1/2 round to the upper edge.

Put some trim on it.  My wife is a professional seamstress.  Thanks for the plans, cause I am not good at woodworking.