Community Brag Posts

We built a dining room table for some of my best friends. It was our first table build and a year later it is still beautiful! If you want to see a few 'in progress' pictures check out my blogpost on it at www.amusingmj.com/dining-room-table

Came together so well. Thanks to Ana and pneumatic addict for tips and plans

I built the coat rack along with the mail sorter and rustic bench for the long hallway to the garage since our new house doesn't have a mud room. I modified it to a length of 6'.  All but a couple pieces are made from poplar.  I burnt the stained pieces with a torch, then put a quick coat of Special Walnut on them.  The painted pieces are Rustoleum Weathered Wood.  Hooks are from Home Depot.

After looking at this for way too long, I finally bit the bullet and built this table. It really wasn't difficult and it's so awesome having a side table on wheels! The stenciling made it a little extra work, but I love the added details.

I made this 4' tall reading lamp by modifying the adjustable height bolt bar stool plans. I had to modify most of the measurements on the fly but I think it turned out well! It's a bit too cold here to stain it, so I'll do that (and tuck the cord away nicely) in the springtime. Love this site! So many great ideas and plans to be found. I recommend it to friends all of the time!

My wife, Krafty Kimmy Paperkrafts, needed a shelf to place in her booth at a local store. Obviously made out of pine, I burned and stained it for her. This weekend I'm making a ladder shelf to match.

I loved this project the minute I saw it. I was using a cheap'o little computer desk that had metal legs and a prefab top for my craft table, I knew how much better my craft room would look with this as well as how much more functional it would be!
The desk went together rather quickly after all the wood was cut, Assembly time was maybe 1-2 hours.
I love it! Now how to finish it....

After craving a zinc-topped X base farmhouse table for our new house's large outdoor space for a while, but not wanting to spend upwards of $1k on one, I asked my husband (T) to build me one as my Christmas present last year. It took us a couple of months to get it done (very spread out over weekends) but I love the result.

I found the plans here for an X base table exactly like the one I had been lusting after, and googling around found several sets of instructions on how to fabricate metal countertops. We ordered the zinc from rotometals.com, and visited our local Woodworkers Source to find a suitable wood. I didn't want to use cheap lumber for a number of reasons.
1. I want the table to be around a very long time, and didn't want to have to stain it over and over
2. I was looking for a high end result that would only look better with wear and tear, which I knew couldn't be achieved with stained cheap framing wood
3. I had heard bad things about how wood wear outside in AZ, and though this is on a covered porch, we didn't want to spend hours making something only for it to fall apart.

We chose a Spanish Cedar, which the helpful guy at WWS suggested as one of a couple of good options. They squared the wood for us and cut it to the exact widths we needed, so T only had to cut to the lengths needed.

Once we were done with the frame, We used a sheet of MDF on a frame of pine to thicken the edges of the top, and wrapped the zinc around this.

We aren't DIY novices but this is the first piece of 'furniture' we have ever built.

We haven't sealed the zinc yet - I want it to patina more before I consider that. I have given the table one coat of oil (no colour) and it's performing wonderfully several months in.

Thanks Ana!

I built this above toilet cabinet for my son and his wife for Christmas. They moved into a new house and wanted this additional storage space.  Turned out pretty good!

Used 4x4's for the legs to make it more "beefy" and therefore had to add an extra 2x6 on top. Also used a 2x4 for the upper side trip instead of 2x2. Used a dark walnut stain and several coats of clear gloss polyurethane.

I had finally had it with the generic drawer organizer that we had. I decided that I would spend a few dollars and make it custom made! I took me aboout an hour and $5. It is amazing how little effort can make your kitchen look like it was a custom created space! I love it!

Built this in a weekend, took about 1.5 days. I ended us using 2x4's instead of 2x2's, I think it resulted in a much stronger frame. I also built a base for it to sit on. I got pre-stained cedar fence boards, and overlapped them 1" instead of a 1/2". Pretty easy project, I ended up siding the back on the ground, installing it, and then adding the side walls without the siding (just the framing), and then sided them in place. The doors work perfectly. I took my total inside dimension between walls, made sure the opening was square, and then divided that by two to get the width of each door. I then took another 1/4" off that, so each door had an additional 1/8" gap, it worked perfectly. When I set the doors, I put them on a piece of roofing closed as I screwed in the hinges, and then opened them and removed the roofing. I opted to run the door siding horizontal to use up a bunch of waste wood. I'm happy with the outcome. I also found some 6" self starting lag bolts and lagged through the back of the shed into studs (through the siding) into the garage behind it.

I had to rescale the Ana White plan to an overall length of 72 inches. All joints are Kreg pocket holes.

The most difficult component was engineering the barn door slides. I used:
1/8” aluminum flat bar for the door mounts
1/4” aluminum flat bar for the fixed bar
Polyurethane spacers from Lowe’s
Lind Kitchen Mute Pulley block from Amazon.com 4 each

The pulley blocks were disassembled and only the wheels and axles were used. Thin poly washers from Lowe’s were used as shims to take up play after being mounted to the flat bar.

Please tell me I’m not alone…!! I must admit that I have found myself (on more than one occasion) just staring at a room for what seems like an eternity…trying to figure out why the space isn’t functional or just feels a bit “off”. It was during one of these “I dare you to blink before I do” staring sessions that I decided to build a table for my guest room.

Lucky for me, I can always count on Ana’s plans to rescue me from decorating madness! Well at least when it comes to the furniture part. (For everything else…I probably need lots of therapy!)

But seriously…anyone else get caught up in the time-warp-room-stare?! I can’t be the only one… :-)

My console table's complete story: http://gleeinspired.blogspot.com/2011/03/console-table.html

Loved this plan, decided to use it for our living room TV console. Planning to add handles to the crates during a weekend when we have some free time. Very impressed with our final product :)

X frame farmhouse tilt trashcan.