I got my inspiration for this bed from the Fillman Platform Bed. I left the platform off, used 2x6s, and added bun feet. I love how low it is to the ground because I don't have to worry about my kiddos rolling off at night or jumping and getting hurt.
These were great plans to work from and we love how the entire set turned out. We already had an outdoor table so we also built and replaced the top with one that matched the chairs. We spent more for outdoor fabric and marine grade foam for the cushions since they're exposed to weather, but the results were worth it.
So, my grandson's room is quite small and my daughter was asking for advice on how to arrange things. I found this plan and figured it would be perfect! It was quite easy to build, but did take longer than I thought. We had three of us working on it and we build it over Labor Day Weekend. It isn't perfect, but my daughter says it just adds character. He loved the bed and the extra space to play underneath. It really did the trick to open up the room. Thanks Ana for all the great plans! You are my idol!! Now, I just have to build one for all the grandkids!
I started building a different bench, but I decided halfway through that I didn't like my design. I found this, and loved it, so I modified my partially built bench to incorporate the woven back design. I substituted in a few mortise and tenon joints for strength, and used either kreg or waterproof glue for the non-structural joints. The seat bottom is made from 2x4's I resawed in half. I also rounded over the edges of the 'Y' pieces, which I think makes it look a bit more like they're woven together. Thanks for the plans, this is a great addition to my front porch!
This table was a cinch to put together and only took a couple of hours
American Girl dollhouse built using PureBond Plywood, Kreg K4, and Ryobi tools!
My dad and I built these chairs by following Ana's Adirondack plan, and then adding our own curved back. We also routed all the edges to give the entire chair a rounded feel. We also built the simple little round side table to use with the chairs.
This cart was smaller then I expected but makes a great little addition to my office
Followed the plans closely. Stained before assembly for the two color look.
I love my Sofa and coffee table!
My wife started looking at expensive patio sets, which I thought were not worth the price, so I decided to build a picnic table. This is not the cheapest table out there, but it's built to last for years!! I used a high quality cedar as I got a price cut from a friend. I also used deck screws, so there would be no rusty screws!! The table top measures 7' long and looks like one you would see at a state park, notHome Depot!
Thu, 08/25/2016 - 09:48
Really like the picnic table - do you have plans for this? (I'm new to this site so apologies if they are here but I just could not see where?).
best wishes
Gerry
I took the original plans from the Farmhouse Table - Updated Pocket Hole Plans - and I modified it so that my table could be countertop height and join up to my counter - like a modified breakfast bar, so this table it countertop high, and is also more narrow and alittle longer. I can easily pull it away from the wall and sit 6 people around it. It is now my favorite place in the house!
My husband and I built this on Sunday- I love how it turned out! The hardest part was finding cushions, and carrying it up a flight of stairs!
Wed, 06/05/2019 - 08:40
I am looking to build something very similar! I was wondering where you purchased your cushions they are beautiful!
A friend asked me to build them a hall tree for their entryway because they couldn’t find one big enough to suit the area in their home. Thankfully I found the plans here for Mimi’s hall tree bench and hutch. I had to modify them slightly to make it a little wider and taller. They were very happy with the finished project!
Thank you for providing woodworkers with these excellent plans for all skill levels!
I built this using the plans for the Perfect End Table. I made it a little taller and jazzed up the shelf a bit. The whole project cost me less than $35!
I had a lot of fun with this project! It was quick, and I already had everything I needed on hand. I have been wanting to get more practice with my jigsaw and this project was perfect for that. I used one cedar picket for the whole box and still had some left over. I added a burlap bow and made the tail with some extra pieces of rope and my glue gun. It was a breeze!
Tue, 03/31/2015 - 06:47
Excellent! I doubt that I will make it in 2 hours, but I'll try. I really like this kind of product, especially given the fact that my wife loves in flowering :). By the way, if someone need help in writing of any type of works, you can visit my website http://www.trusteddissertations.com/ and get a decent discount.
Have a nice day!
This is the table I made for my wife using 2x lumber...I used the epoxy resin finish and it gives it a beautiful look and finish...my wife, family and friends love it...I'm very pleased with how well it turned out...
This was mine and my husbands first project ever! And it turned out even better than expected….now we are hooked! Next the loft bed!
Today I built a workbench from wood found in my alley. No money was harmed during the making of this workbench #renew #reuse #recycle
Comments
lmdelirium
Sun, 01/17/2021 - 20:57
Cuh-uuuute! How did you…
Cuh-uuuute! How did you attach the bun feet?