Community Brag Posts

This is actually the third doll crib and high chair set that I've built for a grandniece. It is inspired by the one Gina from Lady Goats built. She just used 1 x 2's for all of the rails. And since I am trying to make each bed a little different, this was a great option. Again, I used the vintage lamb theme on the crib and high chair from my first two sets.

I needed a solution for my kids backpacks and disorganized papers. I was able to come up with organizer using a quarter-sheet of plywood, a fence board, and a 4' hobby board. It involves ripping the plywood into smaller strips, so I table saw would be helpful, but the project is totally do-able with just a skill saw.

You basically notch 3 divider boards, attach it to a piece of plywood and build a box for each cubbies. I added lag screws and washers for decoration, and some small coat hooks for storage.

Added padded seat to bench lid

We love our farmhouse bed! Thanks Ana! We made a few modifications. We wanted the legs to look a tiny bit more substantial, so we used 1x6 boards for the headboard and footboard. We made our 4x4 legs longer and placed them on the outside to make it a poster bed. I also wanted the end caps on my legs. I glued and nailed 1x6 scraps to 2x6 scraps and then cut a square to size at a 15 degree angle with my miter saw.

After making the Kendal dresser for my cousin, she ask me to build her the small farmhouse table to put next to her glider. I had to make it smaller to fit her space but the plans were so easy to follow and just as easy to make the adjustments. Ana's plans are user friendly like that.
I also made the $10.00 ledges so the little guy can have a place for his stuffed animals and books.
The stain I used was the same as the Kendal dresser so it all matched beautifully in the room. I think this is about the 40th piece I've made from Ana's website since discovering it in January of this year. Am I hooked? I'd say so! Great plans!
My next project will be the toddler seats painted like animals from Killer B Designs that were featured today. I love them!

I have not done any wood working since high school some 30 years ago. I inherited a table saw, found these plans and thought 'why not?' I took my time with measuring, cutting etc. and the matress support pieces have a LOT of screws. This bed is SOLID. It holds my son and granddaughter easily. It disassembles and reassembles for moving so we had no trouble moving from the apartment to my son's new house. Do I need to say that I'm the hero grandpa for making this bed? My granddaughter has used this bed for a year and it's still as solid as day 1.

I chose to make the simple bench 2" shorter, and upholster it, using 4" foam and fabric.

First Ana White build

A modification of the plans from Shanty2Chic - built to fit the space. I eliminated the curves brackets - I wasn't able to pull those off without a bandsaw. Instead, the legs have black steele straps that will match hardware on the beams in the house.

Console table I made for my entry. 

This was my first project inspired by Pottery Barn and while shopping in a local furniture store we realized the cost to have something very similar would cost $1500-$2000. This table was cut and prepped in my garage and then transported to my daughters house in my car and assembled and finished there. The bench is constructed from left over boards. I choose not to use 2X4 legs but rather opted for 4x4's. The length was shortened to 5' for a cross bar was not neccessary. I used carriage bolts to attach the legs to the shirt in case they ever needed to be disassembled. The top is not glued on, only PH screws used. This has been a very satisfying first project, thanks Ana for showing me the way to having lovely homemade furniture that really impresses, is very well made and for a fraction of the cost.

This is my version of the pedastal table.

We took the plan from Ana and instead of the wood X's on the sides, we changed it to rope. We stained it a dark brown so this just gave it some more dimension... we love it!!

The farmhouse bed was the first project I tackled. Although it's far from perfect, learned so much and I love, love, love it!

The crib was our last build project for our daughter's cowgirl nursery. My husband knew he wanted to build the crib long before we knew we were pregnant.

As a mechanical design engineer, he found crib dimensions online that put together a design of what we wanted in CAD. We wanted the end panels to look like barn doors. We also wanted the slat sides to look like the metal on a horse stall. This gave us the overall look we wanted for our cowgirl room!

We also built together a side table, closet system, barm bookshelf, and dresser/changing table. I cannot take any credit for the crib. This was all my husband's work. Excited to bring our daughter home to her complete nursery soon!