Community Brag Posts

I needed to do something with the empty space at the bottom of our stairs. I was browsing Ana's site and the Tryde Console Table caught my eye. The next trip down to the farm, I scavenged for the wood I would need to build it. I found some beautiful old brigde timbers that were 9 inches wide so we modified the plans a bit to use 2 of the 9" boards instead of the 4 smaller ones the plans call for. The dimensions were close but we needed to tweak the rest of the project a bit as well to make it all work. For the finish, I just rubbed it with Tung Oil as to not cover up the beauty of the old wood.

This was a weekend project , lots of fun !

mortise and tenon joints with dado for breadboards

Chestwick queen platform bed! My first building project ever! Altered slightly from original plans in that I left the feet off so it sits on the ground. Added a canopy that hangs from the ceiling. The chandelier is an antique from Great Barrington, MA that I found at an antique shop while hiking the Appalachian Trail. Took the wiring out and sprayed it black. Now it's rigged to use with candles for a super-romantic look. :)

http://ana-white.com/2012/06/chestwick-queen-bed

Loved this coffee table ever since I saw it at Restoration Hardware. Thank you Ana & Jen.

Made the chairs to sit around our firepit .Live in AZ.

Easy DIY Garage Workbench—My first ever project! I learned how to use a sliding miter saw and circular saw, how to choose wood, how to make a circular saw guide, and how to sand properly! Thank you so much for these plans! I learned from Ana’s website, the beginner woodworking subreddit and, as my mom likes to call it, the University of YouTube :)

This was a fan and easy project to build. I wanted the sides a little bit more decorative so I added a tree branch effect instead of the x's. I used a paint samples from lowes and did the under coat of paint in a rusty orange color. I put Vaseline on the parts I wanted to look weathered when the paint was dry. Then I found a diy chalk paint recipe online and did the outer coat again with a lowes paint sample in a reddish color that I mixed to make the chalk paint. When it was dry I sanded the parts tht had Vaseline to let the orange come out. Then I took minwax finishing paste wax and polished the whole thing. I reduced the size of the console to half and added 3 inches to fit perfectly under my tv.

Thanks for the plans

We made this for our daughter for Christmas. We used purple spray paint and I made the mattresses and pillows from Ana's plans, too. Our son sanded it and we presented it to a very happy little girl!

I used the Smiling Mudroom as a starting point, but had to make some modifications for size and to accomodate the fact that I couldn't secure much to the wall behind the bench because there is a pocket door in that wall.

The main difference in my plans is that the sides of the cubby/bench are continuous instead of broken into Cubby, Divider, and Bench. I think it would have been easier to keep things square (which I didn't, really) and certainly could have moved it all by myself without any husband help (but he needed to feel useful, right?) if I had built it as separate pieces. But, it was worth a shot.

Up close it's a bit rough looking here and there because I got the plywood that is only sanded on one side (Home Depot guy was less than helpful when I asked to find the furniture plywood). So I had to do a lot of extra sanding and filling myself and at some point I just threw up my hands and said "RUSTIC! It's done."

Minor errors aside, I am really happy with this. It was my first big project, and first one with the Kreg jig, and I had fun.

please sample my other work at the adress provided below.

Went with the hinge option. For as little as I will probably fold it up, I would next time skip the hinges and spend the time plugging the pocket holes :-)

Great Plans, I had a blast making this table for my wife! It turned out great. Thank you for sharing the plans for this beautiful piece!

-Mike

I was really looking forward to building this coffee table for a while.  I followed the base plans for the Rustic X Coffee table and added my own twist.  I planked 1x3's for the bottom instead of using a solid bottom shelf to give it a "beachy" feel.  I also used 1x6's for the top instead of 2x's to give it a lighter feel.  I framed out the top so there were no exposed edges.  Instead of the X's, I took 2x2's and angled them in the front and back. I know it's very different than the original plans but I had this design in my head and I absolutely love it!  Thanks for the plans!