Community Brag Posts

I made two different versions and reversed side the ladders were on. I learned from the mistakes I made on the first bed and the second one came together a little easier.

I left them natural and the girls will pick a paint color in the spring.

Although I can sew, my wife made both sets of mattresses along with a bunch of doll clothes.

I guess I never got around to sharing my finished chair! I'm almost ashamed to...1) because it was so long ago when I made it and 2) because everyone else's looks so great!

We built and designed this as we went.  All the wires are concealed behind the back of the center and all the media equipment is in the cabinet.  Everything was custom built for roughly $400 and it took about 2 days.

Ana's simple, cheap and easy console table, made entirely with repurposed and scrap wood, so it was free! The plan was great, and it was easy to adjust to the wood I had on hand. The distressed finish was fun to do too.

This was our first Ana White project. We knew we wanted to do a table, and decided this was the easiest one for first-timers without a kreg jig (YET!). We made things even SIMPLER by having Lowe's do ALL the cutting for us! I didn't even know they would do that, but they will.... and happily so!

The project went VERY well and we are delighted with our new table. We used Rustoleum "Kona" stain and we used Rustoleum spray gloss poly because Lowes had a bunch of cans of it on clearance. We were happy with the results, though it may not be the best indoor product in the future ;-)

The project took us about 4-6 hours to build, and then we just sanded a little each evening, and the next weekend we stained and poly.

I made the boxes a little wider than the plans called for but still came out great. I'm very happy. Thanks Ana for the inspiration.

This project is all about using a Kreg Jig. My daughter asked for some shadowboxes to go around her chalkboard. 1 piece of 3/4" plywood and a few 1x2's later - here it is. It's really just an 8' x 2' box with the window panes inside - super simple, but does require a compact drill. Mounted to the wall using a ledger board underneath, then, pocket holes in the top shelf to join it to the studs. Quite sturdy. One day I'll learn Sketch-Up well enough to make this into a plan.

Made from scrap wood left in the empty lots besides me, from framing crews.

Cost me just the time, screws, sand paper and stain.

Made all the cuts with a skillsaw, by saving the $$$ I have now went and bought a mitre and table saw. YAY!

Rebuilt the tops of a coffee table and two end tables using 1x3 and 1x4 common pine boards. Boards were joined together using glue and then Kreg Jig pocket holes and Kreg screws. Tops were finished with Minwax dark walnut stain and bases were painted a light cream color.

We made these chairs following easy instructions from AnaWhite!

This was my third project so far. I am having so much fun with your designs! I bought your book and also got a copy for my friend. Thank you so much for all of your free posts and for being such an inspiration!

I replaced my gas stove, and could not find a 36" wide stove that was affordable, and had the features I wanted. I bought standard 30' stove, but had a gap to fill. Found this site; adapted the filler cabinet to 7 3/4 inches and found the pullout shelving unit. Added a drawer front with a pull, and it is great!