1. Home

Community Brag Posts

X coffee table

X coffee table

Finish Used
Finish was a mixtures of Minwax weathered grey and a little of Minwax ebony
Recommended Skill Level
Beginner

Comments

Nightstand

Decided to build a bedroom set and like the Rhyan end table, but fell in love with tiled version. So we used porcelain tile on top.

Built from Plan(s)
Rhyan End Table
Estimated Cost
$50-75
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax red oak - my fav!, poly coat
Recommended Skill Level
Beginner

Beer Keg Tap Handles

I had some left over Walnut wood, so I decided to make some more Beer Tap handles.  This is a fairly simple DIY that doesn't take that long to complete.  I have already written a full tutorial on my blog:

Blog Link
www.woodworkingfourdummies.com
Estimated Cost
scrap walnut + $3 lock insert + chalk tape (optional)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Water Based polyurethane
Recommended Skill Level
Beginner

Rustic X Coffee Table

This was my first ever attempt at making something real out of wood. I've only made some really basic floating coat hangars and docorative rustic pieces to set around peoples houses and a spice rack. I really wanted more of a challenge and this was a perfect place to start. I had to purchase the Kreg Jig and a couple of large clamps but once I got the hang of drilling and filling pocket holes it was smooth sailing. 

 

The Mrs then finished it off with some lovely rustic baskets and a serving tray with all the latest Southern Living magazines.

Built from Plan(s)
Rustic X Coffee Table
Estimated Cost
$39.97 - Kreg Pocket Hole Jig Model R3

~$60 - various cuts of wood, Home Depot made this easy and cut it all to size for me when purchased. (other than the angled cuts)

$7 - Speed square (for the angled cuts)

$10 -100 count pack of 2 1/2" pocket hole screws & 100 count 1 1/2" pocket hole screws

$7 - Foam brushes
__________________________________
Total: $123 w/some spare wood
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
5 layers of stain are applied in the following order:

1st - Miniwax Dark Walnut
2nd - Varathane White wash Pickling
3rd - Miniwax Classic Gray
4th - Miniwax Dark Walnut (Wiped off almost as fast as it was put on)
5th - 2 coats of clear gloss.
Recommended Skill Level
Intermediate

Farmhouse Table : Restoration Hardware Replica

Submitted by tsibiga on Mon, 06/20/2011 - 09:43

This is the first building project that I've tackled and it's all thanks to Ana-White. I did lots of things different than the building plan but it was definitely my inspiration and extremely useful. I loved the Restoration Hardware table and so I went to the local store to put my eyes on it for myself. Some of the things that I noticed, liked, and included in my design are; I used 4-2x12"s for the tabletop, I used 2x8"s as the breadboards, I used 4x4"s for the legs as well as the side stretcher, I used 2x4"s as the undertable supports, I built two 15" extensions using 2x8"s and 2x2"s, and I attempted to distress the wood yet stain it to match our dining room as best as I could.

www.tommyandellie.com

I've documented the build and you can check it out yourself at: http://tommyandellie.com/?p=14

I've revised the plans with even more details here; http://tommyandellie.com/index.php/2012/01/13/new-and-improved-farmhous…

Hope it helps.

Blog Link
Tommy and Ellie
Built from Plan(s)
Farmhouse Table - No Pocket Holes Plan
Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I banged up the wood using random things around the garage and then used a Dark Walnut Stain. Additionally, on the tabletop I did two coats of Briwax (light Brown) for a nice, shiny, and smooth eating surface.
Recommended Skill Level
Intermediate

Comments

niecey

Mon, 06/20/2011 - 15:06

This is stunning! I'm working on this table right now, but it's no where near as good as yours. I'm jealous. I love your extensions. I'd love to see a tutorial on adding extensions..

ispeakwhale

Tue, 06/21/2011 - 05:16

It looks beautiful. Did you attatch the 2x2 to the underside of the extensions and then notch out a place on the support for them to slide into? Can you please take a photo of the underside with the extensions on?

Tommy (not verified)

Tue, 06/21/2011 - 14:42

That's exactly right. Here's a link to the picture you asked for; http://www.tommyandellie.com/Site/Home/Entries/2011/6/10_Farmhouse_Tabl…

There's some more details and info specifically about the extensions on my blog at; http://www.tommyandellie.com/Site/Home/Entries/2011/6/10_Farmhouse_Tabl…

It's a super simple addition to the design and can take my table from 96" to 126"!!! Or take it from a 8-10 seat table to potentially 16 seats available for those Big thanksgiving meals.

Guest1 (not verified)

Wed, 06/29/2011 - 15:41

Hello,

I was just wondering that since your table is a bit wider than Ana's table, did you make the support for the stretcher wider? As in, did you increase the length at all (in addition to making it stick out a bit at the ends? If so, what did you extend it to? Thanks and gorgeous job!

tsibiga

Wed, 06/29/2011 - 18:49

Hello,

I followed Ana's example and allowed for a 1" overhang on both sides. So the tabletop is actually 44" wide and the stretchers are approximately 42". The long 2x4" stretcher is approximately 88".

Hope that helps. Thanks for the positive comments.

Guest (not verified)

Wed, 06/29/2011 - 20:28

I cant believe how good that looks. Great job! Out of curiosity, how did you make the notches (dados) for the 4x4 legs where they meet the table top? Really impressive table!

tsibiga

Thu, 06/30/2011 - 04:43

For the table legs, I set my table saw blade to a height of approximately 1.5". I then made a first cut at 3.5" from the bottom, then made a cut at 7", and then made several subsequent cuts in between those two cuts. After it was all slivered, I used a hammer to knock it all out, and then swirled the opening all around on the table saw (blade still at 1.5" tall) to smooth out all the cuts. I used the same technique for the stretcher as well.

Guest (not verified)

Sat, 08/06/2011 - 21:36

Hi Tommy, I tried clicking on your site and was told the site could not be found. Last week, I saw it fine and showed my hubby our next project, but now it's gone. Help!

Keri Beth (not verified)

Thu, 03/01/2012 - 07:17

What inspiring pictures! Apparently everyone agrees, because I just "pinned" one of these pictures to Pinterest and it was immediately repinned 27 times and counting. So nice work! I hope to make mine this weekend.

DES.II (not verified)

Sun, 04/29/2012 - 06:29

She and her boyfriend would like to build it using lumber i cut from my mill. They are thinking walnut, hickory or maybe ash but im not sure how that will work out with being distressed. And your extentions, do you have a 2x4 or two that slides out from under the table to help support them on each end ? Are there pics of the under side of the table as well? This is a great table and i think they will have fun as a family assemblimng and finishing it.
Thank you. DesII

Marci (not verified)

Thu, 10/11/2012 - 12:12

Where can I find the bench instructions??

James Groover

Tue, 04/14/2015 - 13:31

Hey Tommy, I saw the Farmhouse table design with extensions, I don't have Excel to open the cut list and need the buy list and cut list to complete the project, I am really short on time and need to start this project tomorrow. Please if you can, do you have a word document or a PDF that shows the page for those?

Modified Rustic X Console

Submitted by coreym95 on Wed, 08/19/2015 - 16:04

Modified from the original plans to make it longer and thinner to fit the space/need.  

For the "X" cuts I just built the frame, clamped on a rough length of 2x2 and drew lines where the cuts should go.  I ended up cutting those by hand since they were well over 45 degrees.  Next time I will make a jig for my miter saw to handle those angles.

Finish is just vinegar and steel wool.  The picture with the clamps is before the top coat was applied. Once the poly was put on it gave it a nice gloss and nice, rich colors. 

Now it just needs some decorative pieces sitting on it :)

Finish Used
Steel Wool & Vinegar with 3 coats of poly
Recommended Skill Level
Beginner

Comments

Kari410

Fri, 08/21/2015 - 20:53

Your console turned out great! I was curious if you still have the dimensions you used?

Thanks

Farmhouse Table

I love this table and bench set! Very easy to build and didn't take too much time. We made it a family build. My kids helped put together the benches and table. My wife and kids did all the staining.

Built from Plan(s)
Beginner Farm Table (2 Tools + $50 Lumber)
Beginner Farm Table Benches (2 Tools + $20 in Lumber)
Estimated Cost
$150 for lumber and supplies.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Early American used with a staining pad. We applied two coats for a darker finish.
Recommended Skill Level
Beginner

Inspired by the Farmhouse Bed..... for my Dog!

Submitted by dmanar33 on Wed, 06/22/2011 - 20:15

Inspired by Ana's Farmhouse Bed plans, I built this dog bed for my Jack Russell. I measured and planned for it to comfortably fit two standard bed pillows (in waterproof covers of course!). She loves it!

Blog Link
Crafted Niche - A Dog Bed for Roxy
Built from Plan(s)
Farmhouse Bed for American Girl or 18" Dolls
Estimated Cost
$20ish
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Primer and latex eggshell paint with glaze on top
Recommended Skill Level
Beginner

Comments

Mgoodlin

Thu, 10/03/2013 - 08:49

I love this dog bed and want to make it for my puppy's Christmas gift. Where can I find or purchase the plans to make it?

Toddler bunk beds

Submitted by jarsofclay on Sat, 08/03/2013 - 19:01

well after I made my daughters bunk beds my toddlers were begging and begging me to make them a bunk bed so this weekend I decided to make a toddler bunk bed. So here it is and I'm here to share with you all.

Built from Plan(s)
Toddler Bunk Beds
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I stained it with early english stain
Recommended Skill Level
Beginner

Comments

CreativeChaos

Sun, 08/04/2013 - 16:20

That is absolutely adorable! We know all about the little ones wanting to be like the big ones. Great job!

jarsofclay

Mon, 08/05/2013 - 15:57

Thankyou very much! Yeah it was every day every time I'd go into my work shop they asked if I was making their beds

herrejon

Sun, 10/13/2013 - 17:48

Hi! it's just what we're looking for!
do you have plans or something like instructions por dummys :)
i'm a begginer

herrejon

Sun, 10/13/2013 - 19:11

Thanks a lot! It looks so easy! Can't wait to start! I'll share with you our happy little faces when it's done :)

More From Johnnie8!

Submitted by Johnnie8 on Mon, 08/24/2015 - 04:23

Hi Ana,

 Here are a few more pics of some tables I've built! I would love to know what people think!

Thanks!

Built from Plan(s)
$55 Fancy X Desk
Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
My own blend of stain, paint and wax. Finished with a poly sealer.
Recommended Skill Level
Beginner

Comments

Buffet, serving table

I made this buffet, serving table to go with a large gathering farmhouse table I made. I loosely used the farmhouse table plans but did some designing of my own based on a picture my friends had of what she wanted.

Built from Plan(s)
Farmhouse Table - Updated Pocket Hole Plans
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Varathane - Kona stain
Recommended Skill Level
Intermediate

Dog Kennels

Submitted by Anonymous (not verified) on Sun, 04/24/2022 - 10:20

Here's some photos of customer products I have built, over the past 2 years.

 

by Bob

bar stool and side table!

Submitted by Marisol on Mon, 06/27/2011 - 19:33

i made this a while back, but just got through painting it. Saw it was a great table for drinks, will serve a double purpose.

Built from Plan(s)
Stools for the Bar Table for the Simple Outdoor Collection
Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Behr outdoor white paint and killz outdoor primer
Recommended Skill Level
Starter Project

Comments

Marisol

Tue, 06/28/2011 - 11:24

I was surprised at how sturdy it is, although my husband is still scared to sit on it, but it's sturdy! :)

spiceylg

Wed, 06/29/2011 - 11:01

Nice job and I absolutely love your profile pic! That's the best!

Hey. I built a bed!

Submitted by Al Lulu on Mon, 08/05/2013 - 17:19

Well, one thing's for sure. Follow Ana's plans and everything will come out just right.

Oh. And another thing. I can't get my kid out of this bed! It's awesome. And really simple to make.
Thanks, Ana!

Built from Plan(s)
Camp Loft Bed with Stair, Junior Height
Estimated Cost
$125-$180
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Suede Gray Beauty

Submitted by pfossi on Thu, 08/27/2015 - 18:25

This was produced from the Queen version by adding 16 inches to the width of several of the pieces of wood.

Built from Plan(s)
Mantle Moulding Headboard
Estimated Cost
$250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Webster Chalk Paint added to Behr Ultra. Finished with several coats of bees wax,
Recommended Skill Level
Intermediate

Comments

Split Chevron Trestle Table

Submitted by rbgreene04 on Wed, 04/18/2018 - 22:32

I followed the X-table plans for the base and then went a little nutty on the table top. I also beefed up the bottom stretcher on the base as I felt it complemented the 4x4s used for the feet well. I left off the diagonal braces as I liked the contrast of the beefy legs and stretcher and the open airy appearance between the base and tabletop. There were several blogs/ideas on Pinterest about a Chevron style table top. I took pieces from all of them for my design. The table measures 99.75 inches long by 41 inches wide. I thought being a quarter inch under 100 was a bit quirky and did it merely for that reason. Oh and please forgive the photo bomb by my daughters. I could not take a picture without getting at least one of them in the frame. My oldest is being a little silly in the pic trying to show the detail of the Chevron design--or split Chevron as I'm calling it. 

Built from Plan(s)
Fancy X Farmhouse Table
Estimated Cost
Under $100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
My last outdoor table failed miserably (it was a beautiful design IMO, of plywood strips layed on edge to create a striated table top). I finished that failure with spar urethane specifically for boats. But plywood, while extremely stable indoors, is a terrible choice for outdoors. Lesson learned. For this table I used a deck stain and sealer. It's Olympic Maximum in Canyon Brown color. Hopefully I'll have better luck!
Recommended Skill Level
Beginner

Comments

Hope Chest

Submitted by Daniel B on Sun, 04/24/2022 - 13:26

Wooden chest built by Daniel!

Comments