Community Brag Posts

We followed all the original plans and added a few modifications. Chickens seem happy! We dropped the height of the nesting box down a little and made the roof only cover half of the coop. We live in California on the central coast so it doesn't get too cold. We also only made one side of the nesting box able to be opened. We added a little door on the bottom level with left over t 1-11 for easy access to their food and water and in the hopes that eventually we will let them roam our yard supervised during the day.

All in all the project cost us about $150 and took 4.5 hours to complete! Thanks for the great plans!

This turned out to be a great project.  In the end it took far more time than I thought.  I used Mahogancy and Maple for the table top. That was expensive and costs around $250 in material alone.  I attached the boards together with Kreig Screws.  It took around 120 screws to get it all done.  

There are a few things I would do differently.  I would not use 12 inch wide boards.  They are all warpped or cupped.  I would either use birch veneer plywood or I would use 4 to 6 inch boards, straighten the edges on a table saw and then glue them together.  There are YouTube videos that show how do to that.  The 12 inch boards just did not cooperate and I really had to struggle to deal with the twisting and cupping. And, I hand picked what appeared to be straight boards.  

The top took a lot of sanding.  The Krieg system states that glueing is not necessary.  However, that is really not accurate when using different kinds of wood of this length.  So, the edges raised up and needed some serious sanding.  I also should have cut all the edges straight because after the job was done I could  see spaces between some of the boards.  Not a big deal but just somehting to take note of.  All together this took around 50 hours.  I also used a router to cut the shelf supports, (a challange in cupped wood) and I put some extra mouldings on to cover up the cupping and warping in places.  Then we painted it white with aqua trim and decided to re-do the color to dark blue.  

My wife loves the table and it looks great and no one knows about the mistakes but me. It is a great design and very functional.  I really like the hardwood top. 

Easy, fun and inexpensive headboard!

I opted to stagger 2 different kinds of wood on top for a little pizzazz. The lift hardware didn't line up well and ended up needing a spacer inside to glide smoothly (link was out of stock so I went rogue), but now it's lovely. I chose the X brace with no bottom and left the natural wood with stain. My dad helped me do biscuit joints for the top and mortise/tenons in the frame. Overall I love it! - Brooke

I saw the plan posted on this site and had to bulid this for my grandson Paulie. The whole build took one day from start to fininsh. I didn't have to spend much for the project since I already had most of the material on hand. I used a tabel saw, Jig saw, and Miter saw to make all my cuts as directed by the plans. I found the project plans to be very simple to follow. I can't wait to see the look on my grandsons face when he sees this on Christmas day.

Respectfully,

Rich

I designed this closed storage unit for my main bathroom. Two adjustable shelves behind each door make storage very flexible. The open middle shelf is tall and easily accessible for items used multiple times a day.

I built this with a single sheet of plywood. I splurged on nice hinges for a full-overlay door.

I drilled my shelf pin holes using a piece of pegboard as my guide, and some painters tape to mark the depth on my drill bit so I didn't drill too deep.

Getting the doors to hang straight was one of the hardest parts! I apologize that the pictures are all sideways, I don't know how to fix it.

I modified this project to fit my space.  I'm pretty new at woodworking but everything was fun to do.  One of the hardest parts for me were the legs so I opted for cabinet feet from Ikea.  I've gotten so many compliments so far!

Modified the post from birds and bees. - Jay Varghese

I just wanted to share the loft bed I built for my daughter based on the plans available here. I added a desk, painted an existing chair I had built to match and included pink LED lights around the inside of the bed. Thanks for everyone sharing their ideas, plans and pics..!

Great rustic farmhouse dining table

Fun quick project for our new house. I finished this bed in 2 days, and my wife was very happy! I stained it in Jacobean (Minwax), and finished with a clear satin poly.

My son loves to be in the shop with me. For Christmas I thought he would really like his own workbench with some tools that he sees me use. He really gravitates toward the clamps and my drill. I lucked out and found a fun drill that he really enjoys... "just like Daddy's!" I hope it serves him well for years to come.

The frame is joined with glue and screws. The screw holes are filled with contrasting dowels and cut flush. The top is 2 pieces of 3/4" birch laminated together. I rounded over all the edges with 1/4" roundover bit in the laminate router. The top is attached with pocket screws.

Fun little project, think I used too many pocket holes, they are really visible, all well, take what you learn.