We needed a guest bed in a hurry and this fit the bill.
Wasn’t too awful bad. The cuts were basic and easy to duplicate. I would recommend having some clamps to hold the supports in place while you try to screw them together. Otherwise, this table is pretty heavy duty and a lot bigger than I thought it would be. I sprung for a more durable and harder wood top, oak so the cost was about $25 more.
Love this plan, it was easy to do. I did modify it a little as did another member with longer support arms. I just purchased an extra 2x2 and cut it to fit! Thanks for the great plans!!! Hope to see more shop furniture on here soon!
In reply to This is just great!!!! by Ana White
Thu, 06/14/2012 - 01:00
Always love to get feedback and when the Queen Bee of Building comments with a compliment, I'm just thrilled!! Thanks a bunch for posting the plans!!!!
My wife and I wanted to upgrade to a king size bed and we stumbled upon this website and are so glad we did. My dad and I built this over the course of a month, working a couple hours at a time as time permitted. It was a fun build and the plans are easy to follow. I encourage anyone building these beds to find the exact measurement of your mattresses and modify the plans accordingly.
Mon, 02/20/2017 - 13:43
I plan to make a bed very similar to what you did. I like the idea that it has a headboard and footboard with storage on the sides. How did you end up fastening the head and footboards to the body of the bed?
Mon, 02/20/2017 - 21:06
Bought your book and I love it, pouring through it every nite. Planning to make the full size farmhouse bed. Got lots of tools in the Garage and taking inventory of what's in there and what I'll need, (none have been used in a few years). So glad my husband left all the tools behind when he left.
I've already built the worktable and saw horses.
Mon, 02/20/2017 - 21:07
Bought your book and I love it, pouring through it every nite. Planning to make the full size farmhouse bed. Got lots of tools in the Garage and taking inventory of what's in there and what I'll need, (none have been used in a few years). So glad my husband left all the tools behind when he left.
I've already built the worktable and saw horses.
Modified to make the coop bigger and the planter smaller. Added 1" foam insulation on the inside and changed the design to use the "deep litter" method. This means the coop bottom goes all the way to the bottom of the support beam rather than using a removable tray. Added a steel roof with a ridge vent at the top. The chicken run under the coop is lined with buried hardware cloth so no animals can dig under the coop. All hinges are mortised and doors flush mounted. The coop is wired for power for a heat lamp. The planter is lined with a metal tray. The coop can be separated into two pieces so you can move it or rotate the top 180 deg if needed (so you can get to the eggs from the left or right side). Great plans, thanks Ana!
Tue, 05/12/2020 - 15:09
Amazing! Thank you so much for sharing a photo, this is truly beautiful!
Sun, 09/27/2020 - 14:42
Do you have the exact measurements that you used for this one?
I loved this project! First time I got to use my kreg jig!! Which I would recommend to any builder. Took me a few hours. Not sure how I'm going to finish them yet!
Farmhouse outdoor table.
Donna and Shelley
We took the loft bed plans and modified a bit for our daughters bed. We made it a little taller including the doorway. Instead of a ladder we did a set of carpeted stairs with entry to the underneath space through a door on the inside and added a light for a 'secret' hideout. Everything else were just some added features. We built flower boxes and added foam blocks with silk flowers. For the gable we used bead board. For the shutter we used small wood strips and the horizontal pieces are just the free paint sticks from lowes cut down. We then added wired in lights hooked up to her light switch. (she loves this part) Then he built a fold down desk that can be opened or closed for when they want to play in there. The school supplies we used the rod and tin buckets from Ikea kitchen area. Over it took about 6 weeks to do everything between watching the kids and working. Cost for materials and the extras came to a little over $600.
I wanted to build a structure for the kids to play in, but not include a playhouse. I used the playhouse deck design and made it slightly smaller (6 feet by 8 feet). The "roof" is removable to provide shade when it's sunny. It's just PVC and a tarp - pretty simple, but it does the job. I used treated posts and untreated lumber for the rest of it. I painted everything in my garage before assembling it. Once all of the wood at been painted, but came together pretty quickly!
DIY Home Closet Upgrade
At the start of the COVID situation, I decided to make a furniture set for my three seasons room. I figured, i had all the tools, so why not. We used the Modern Chair and Modern Love Seat ( but extended the love seat for 3 seats). I added a middle support on the couch to accommodate the longer length. I also added the backs, because we found out that the cushions we ordered liked to fall off the back. I just made a 10 degree cut on 2x4's and added a 2x6 piece for the top of the backs. I also ripped a 2x4 down to make the table top close to seamless ( I did not properly join the 2x4's) It was a great project, my wife and i enjoy doing these projects together. We cant put a children's play set together, but we can create things from scratch.
I had a lot of fun building this table! Ana's plan was easy to follow, even for a beginner like myself! The only thing it needs is exterior paint. I will definitely try another project from this site! Thank you Ana!
Vicky Shank
My take on the Octagon Picnic Table.
Brad Tom
Used box store lumber and did a light burn, tung oil and sealant.
Tim H
We built two of these beds for our daughters and modified the plan for their full size mattresses. Also modified the rails for a different look. Of course their dolls needed matching beds as well :)
We made the traditional Twin Farmhouse bed using Ana's plans. We did modify the height of the headboard and foot board in case we decide to move the bed to under her window.
I was very particular about the sizing and placements of the sideboard/trundle. I did not want a big gap between the mattress and the trundle. Also, did not want the actual bed mattress to sit down too far into the 1X10 and look like a crib.
Very happy with the results. Thanks so much, Ana!!!
Mon, 08/18/2014 - 05:01
This looks great! I see you have carpet (as do I) did you use caster wheels? It looks like it's resting on the floor. I want t build but, I'm concerned about the ease of sliding. Tips appreciated.
Thanks in advance.
My dad was a lot more particular with this than a farmhouse table is intended to be. Lol
I followed the plans pretty closely. As you can see, I added an extra 2X4 inside the uprights. This gave me room to mortise the 2X4s that run under the table top. Very sturdy and useful. The third pic shows when we used this table for a birthday party. Matched up exactly with our dining room table! It only took one extra 2x4 to make the alterations.
My wife has been asking me for quite some time to build her a bench for the front porch. I finally found some time to make one. I looked at a lot of different benches on Pinterest, YouTube and other websites and I presented the options to her, and she liked this design the best. She only had one request and that was for the top to match the front door and the frame to be white. I have a step-by-step video of how I made the Farmhouse Bench (Click Here) to see the video.
This is the third time I built this table. Everyone who has it loves it because it is the "perfect size". This last build was someone not as rustic, so I opted a premade round table top. This probably added $15 to the project but saved at least an hour.
Comments
merryhannah
Sun, 05/27/2012 - 12:08
So beautiful and simple!
So beautiful and simple! Gorgeous kitty too (:
norge79 (not verified)
Thu, 12/20/2012 - 06:32
Platform bed
Thank you so much for posting this platform bed. I am building my first home. I am doing the finish work myself. Needing a box springs for a mattress I decided to build my own out of the scrap 2x4's and 1x4's. This bed style will fit perfectly in my new home!
esirois
Thu, 05/22/2014 - 09:37
Headboard
how did you attach the headboard to the frame?
I cant seem to find those instructions anywhere.
esirois
Thu, 05/22/2014 - 09:37
Headboard
how did you attach the headboard to the frame?
I cant seem to find those instructions anywhere.