Community Brag Posts

Made this for our 3rd daughter for Christmas. I had finials, but ended up liking the look of the crib better without them. It was so fun to build and my daughter was super excited Christmas morning! Thanks!

This project started by using the Ana-White Dress Up Tower Plans.  Modifications were made to increase storage area and to include a lazy susan base.

I built this vanity and mirror out of pine and finished it in a variety of stains to get a reclaimed look.

This was my first Anna White experience. It was a great beginner project. My husband was even impressed with the results. I was a little scared of the Menwax Ebony stain, but I applied it with a rag (several coats) and it came out very even. I used paste wax to finish off the project and it turned out great. I'm soooo proud of myself. I hope I don't sound too obnoxious, but it was just so much fun, and I was so surprised that I could build something that looked this professional. Ok, shutting up now. :-)

My first big project. It turned out great! There are a couple of issues with the plans but nothing a little common sense couldn't resolve. Also, for any beginners out there, make sure when you're going through your cut list, start with the larger pieces first then work your way down to the smaller cuts. You'll end up having to take another trip to the hardware store if you cut the smaller pieces first. Great plans Ana White! I built this as a Christmas gift for my girlfriend. She was blown away! She absolutely loves it!

~Justin~

Pretty straight forward plans.

My husband and I loved the Squared2 Chair we saw on this site and we knew that we wanted to have this design for our dining chairs. As my building experience has increased, I thought it was time to try. This is my first chair: it is not perfectly executed, but I learned a few things along the way and I've decided to buy a few tools, too. I modified the square back pattern cut lengths explained briefly on my little blog.

With another baby on the way in a few months, we decided to move our 2+ year old daughter across the hall into her first big girl room. I built big sister the Kendal Extra Wide Dresser, Traditional Wood Toddler Bed, Letter A Shelf and a Dollhouse Bookcase and matched the colors with her new comforter, lamps and princess canopy tent from the Land of Nod outlet.

This is a pretty easy project to build with the right tools. For the backing, I used beadboard plywood that I had leftover from the headboard of the toddler bed. The one tricky thing was how to actually hang the bookshelf. The weight of wood for the shelf is somewhat heavy and that's before anything even goes in/on top of it. After a few trips to the big boxes, I decided on using a heavy duty mirror hanger, which so far, has worked great. 

Outdoor Couches made from the plans on the website.  Added 2 2x4's on back top to add support when leaning back.  Also added vertical supports on the back to help with added weight.

Stained and Sealed with Natural Cedar Stain and Sealer

had a lot of scraps and put them to good use with this shelf, east to change out any art/photos my kids would like on their walls, size of frames, etc...without nailing frames, changing positioning, just re-arrange on the shelf :)

This was my first furniture build so there was plenty of trial and error but overall a good learning experience. The middle walls were made using the same notching techniques as the plan, but with one big notch and several 2x4s.

Building was the fun part, finishing was not. Started with a belt sander and after digging into the wood too many times I tried an orbital. Had to resand due to swirl marks from the orbital sander. Hand sanded from 100 grit to 220 grit, applied gel stain and noticed the wood grain had completely disappeared. Seems like the pores were too closed from the fine sand paper so took it back to 150 grit and it was all good.

I adjusted the size to be a total lenght of 71 inches by 40 inches wide. 

I put all the boards through the table saw to create the flat edges whcih allowed for the flush table top.  Had difficulties with the X cuts, but turned out nicely.

Used a mix of 2 stains to reach the grey, almost barnwood look. Love the way it looks.

My Apothecary Console

This was very easy to do. The hardest part was creating the miter edges for the trim and having them line up nicely. I would consider the trim a must, I just felt it made the project look finished. I had a difficult time finding *cute* baskets to fit underneath... It measures 10" and will fit a standard laundry basket but I was going for a different look. I picked these up on sale at office max, not exactly what they were intended for but they work great and keep the laundry room nice and tidy. Happy building!!

We added Ana's truss beam base to an already-existing table top that we had DIY'd years ago (our very first project!). We made the benches per her plans as well and now we all just love it! The whole thing is big, sturdy and beautiful. The only thing we didn't do were those two pretty beams that come down in the center - my hubby liked how simple it looked without it :) Loved this project! (And love how my three kids crawl all over it! Memories!)