Community Brag Posts

This was my first project. It took me a longer time than planned because I kept making mistakes and kept going back and trying to fix them. The plan was simple enough and I learned alot from this project. I can't wait to start my next one!

I built a wooden toy truck using a leftover 1x4 board in my garage.  For this build I used Ana White's plans for the wood wheelie cars.  This was a quick and easy project  and my first project using my scroll saw. Not too shabby for my first go at toy making.  However, I am not happy with the finished toy.  If I did it all over again, I would take my time with the finish.  Also, the driver was not perpendicular to the truck's body when I created the holes for the axles, so the truck leans slightly. My son does not seem to notice its flaws, so I will try to overlook them as well!  Check out the blog link for more project details!

Took the console table and made some slight modifications to give different compartments for a TV stand :) Currently made the "Rustic" themed coffee table and some end tables. All have the matching "X" accents on the sides. Cabinet set into the center with shelves on either side. It's nice to have customized shelf heights for my various TV accessories. 

This was a good project and I'm not very advanced. I increased the size of the table top to 60x28 and decided to just increase the width of each drawer by 6" and keep the aprons at 6" I was able to find a piece of oak plywood that added to the cost but I have two big pieces left over for future projects.

One thing to watch out for - the cut list says the leg trimmings should be 25 1/2 but the drawing shows 25 3/4. Shame on me for not adding it up, but I ended up having to trim 1/4 off the top of the center leg boards before putting the plywood on it.

On the top I measured out where I put the drawer housing support screws, overscrewed them then added some 3/8 flat oak caps. I also did this at each corner into the legs. I think it gave it a nice worn look to offset the modern feel of the desk.

Slide out spice drawers.  Simple build from 1 piece of 1 by 3 and 1/4 inch plywood for base.

This wonderful addition to my front porch was a delight to build.

As soon as I saw the "Rustic X Console" table, I knew I wanted it !! I love the rustic look without being too country. I needed something to hold all the TV components (cable box, DVD player, etc) as well as kids toys. Something that would store what we have now and transition with us through the years. As the kids gets older and toys start to move out, I can still use it! We modified the plan by adding a small shelf at the top to hold our media stuff. I like having the very top free from clutter. Everything is tucked away but still easy to access. It's perfect !!

We finished it by using a green paint wash with leftover paint from our kitchen (3 parts paint to 1 part water). It worked perfectly. We can still see the wood grain and it adds a little color without being too overpowering.

My husband and I built this together, we stuck to the plans provided for the Martha Inspired Craft Table, however we left off the trim around the drawers for a simpler look.  The drawer pulls were purchased at Home Depot.  We used poplar wood that we stained with Georgian cherry gel stain from General Finishes.

Father and son project. Took less than half a day. Already have three offers to build for friends. Couldn't find 10' Cedar so had to use 8'  Using scrap pieces of cedar to make a coffee table. Great plans! 

With a child on the way, our house has been undergoing some changes. We were in need of a guest bedroom for family members and needing to store my wife's childhood twin bed with a hidaway twin underneath that was set up in the room that would become the nursery. We also needed to clean all the backpacking gear out of the closet in the nursery room to get ready for it to be taken over by all the baby stuff. I decided a "King-sized" bed out of the two twin mattresses would be a good solution as it would keep us from "storing" the two mattresses and meet the guest bed need. After I came across the plans for the fancy farmhouse bed, I knew if i just added some height to it, I could meet the storage need too! There's 14'' on my version of the fancy farmhouse bed between the carpet and the rails, plenty of room for medium sized plastic tubs to slide in and out (as seen with the "test tub" in the picture. Under my bed there are currently 9 tubs, two large suit cases, a PA speaker, Power speaker head, a large double sleeping bag, and a little room for more. I'll try to add pictures when I finish the room out with night stands (wine crates mounted to the wall), a bedskirt, lamps, and a headboard. Once I got the wood home, it was a fast build. The slowest part was painting

I built the Twin Storage Bed twice in a (very) full week of vacation. The project was big, but straightforward. The headboards are my own design, and are really strong with the addition of a 1x3 on the outsides to support. 

The kids were part of the building, so they were especially excited to sleep in them....over the week I was building them, we moved them out of cribs, onto the floor in crib mattresses, then to bigger mattresses, and finally to their big-kid beds.

What a great set of plans! The only glitch was that I cut the supports for the middle according to plan (15-1/2") and discovered when I assembled the beds they were a little too short for comfort. So I used them to add to the piece on the back of the long boxes, and used pre-fab particle board to make the cover, which probably works better with our foam mattresses anyway. I drilled a couple of holes in the smaller of the particle board sheets to make it easy to lift off and use the middle for storage of some items.

Thanks for the support to do my first big project!

My very first furniture build! Took me about 5 days, but as a beginner I found it very easy to follow the plans. I did buy a Kreg jog for this project, highly recommend it! Other tools used were a miter saw, circular saw, and drill.

I've been meaning to build my own desk for my office and I wanted to stay true to the Eco Modular design. But, then I was offered a huge promotion with a larger office in a city 3 hours away. The space already had the "executive style" desk made by prison industries, so I thought I would replace it with with the "executive style" based off the Eco Modular design. I used Purebond plywood, cut all of the pieces at my house, put them in my car, drove them 3 hours to the new office, and crossed my fingers that it would all fit...and it did! The drawer faces were a bit more of a challenge, getting everything sized properly, but it's all come together. I like having the shelf on the one side to get my printer off the desktop. More room to spread out.

Just a classic looking tv stand. Way cheaper than buying at the store....

I'm making this for my wife, I added a little Riser on the back because it won't be leaning up against the house and I didn't feel back was high enough.

If you find yourself in the 6-foot range I would recommend increasing the leg height and adding a 4th 2x6 or even a 5th to increase the bsckrest.