Patio furniture
Custom cedar patio furniture
Custom cedar patio furniture
This is my first build cutting angles. I was quite intimadated at first but lucky for me I have a carpenter husband who mentors me :) So he went to work and I got to cutting...now to build table 2. We still have yet to commit to a finish but I am still thrilled with the finished product.
This is the second Farmhouse Table we've built and this one is sooooo much nicer than our first one. The build went smoother the table top turned out more straight with less high spots. The oxidized finish is super gray due to the cold weather here.
So beautiful!
Tue, 11/05/2013 - 12:40
Nice Job! Looks great! Was there something that you did that helped prevent high spots in the table top? I will be building a table in the near future and was curious if there is a trick to it. Thanks!
In reply to Nice Job! Looks great! Was by RN woodworker
Tue, 11/05/2013 - 13:39
It was really a two person job. My husband held the boards perfectly straight and flat while I screwed in the pocket hole screws. You should definitely build a table, they are relatively easy and super beautiful. Plus when you get compliments you can say "Yeah. I made that."
In reply to Nice Job! Looks great! Was by RN woodworker
Tue, 11/05/2013 - 13:39
It was really a two person job. My husband held the boards perfectly straight and flat while I screwed in the pocket hole screws. You should definitely build a table, they are relatively easy and super beautiful. Plus when you get compliments you can say "Yeah. I made that."
Tue, 11/05/2013 - 17:27
Is the table top also douglas fir? The finish of the top came out great. Is it the same finish as the base? I love the top and hope I can do the same!
In reply to Is the table top also douglas by bclute
Tue, 11/05/2013 - 17:35
Thank you! The table top is douglas fir as well. I just bought the cheap framing lumber from the blue store which I believe is doug. fir. The finish is the same except that I waxed the top 2x with dark wax and 2x with clear wax and then buffed it. I only waxed the legs once with brown wax so it does look a little bit lighter.
We tweaked a few things, to make the brackets more personalized. We changed the measurements to suit our space, added a decorative bevel to the bottom of the brackets, and used 2x12's for the shelves. We love the warm open feel these shelves give to our farmhouse kitchen! Thanks, Ana, for providing so much help and inspiration!
I love making this table, my take on the Patriotic theme. Sanding and Painting always add time, this is a fairly easy project.
Thu, 06/20/2019 - 14:36
What a fun project, just in time for the Fourth!
This table was made out of Pecan. The legs are pine. I think the basic plan was from Ana-White.com but I am not sure.
This is a nice shelf for our tiny entryway. The baskets are perfect to hold our individual hats, gloves and scarves during the winter. Customized for four and we also left the back off because we didn't feel that it needed it. We made this out of leftover wood and stain from our son's storage bed.
My dad and I made this for my 3 year old and she absolutely loves it. The wood that was recommended to use for the roof didn't cut well with the pattern so we decided to be creative and used door shims to make the roof look like it was made of shingles. We used scrap book paper and decoupage for the walls. Still having a hard time finding the right sized doll furniture for it, but it's a great house. Very sturdy and we put wheels on the bottom.
Fri, 11/08/2013 - 08:08
Thanks! It's definitely easier to move it around with the wheels because it's so big, but also not too heavy so she can pull it out on her own:)
Sat, 11/09/2013 - 07:55
Love this! I built the dollhouse bookcase earlier this year and still need furniture. Where did you get those chairs?
In reply to Love this! I built the by sraper2
Fri, 11/15/2013 - 09:51
Ha I bought them at value village! I've been trying to find the right size furniture and i've been having a hard time finding any, so I went to Value Village and found a bunch for $3!
This was easily made from the plans on Ana White's website. I spent about $20 total on the bed and $7 on the fabric. I had the foam from another project. I could have spent less on the wood, but I opted to buy the sanded pine boards for they are much straighter! Thanks for the plans....it saved me about $150 that I can now spend on more projects!
Found a bench on a second hand site for $5. The wood was rotting and the metal was rusted. Brought it home, took it apart, cleaned the metal parts and cut pine 1x3s to size. With some black Rustoleum paint for the metal, stain I had on hand, and an oil based top coat, I have a beautiful new bench for my front porch.
Sat, 07/06/2019 - 22:49
Nice job! So great you have new life to this bench rather than by a new one.
Fri, 05/15/2020 - 20:05
This is beautiful. I just did the same with my bench and have become more confident in my woodworking skills.
Moved into a new house after a fire destroyed almost everything, rather than buying new beds for my kids, we decided to build! They turned out beautifully, and the kids love them! Decided to modify the camp loft bed, removing the stairs and using the foot of the bed a ladder style.
I didn't really use any of the construction techniques from the plan, but I got the idea based on seeing the platform feeder. I used spare wood (with routed trim already on it) that matched my bathroom, and made the cats a nicer looking feeder (one that they couldn't keep knocking to the floor and breaking!). The tile is mounted on cement hardibacker board, which is attached to the 3/4" wood platform. I used a zip saw to cut out the circles in the wood and the cement board (with the appropriate drill bit). I used a tile nipper to form the tile around the bowl opening. I added several coats of varnish to finish.
I used the Subway Tile Bookshelf plans and made it 74" total in height. Each of the bottom 4 shelves measured 14" and the top one was about 18" (I forget exact measurement). Instead of putting the plywood on two of the boxes, I switched it up and placed them on 4 boxes.
Love the plans and concept. Thanks!
Built a platform bed and headboard using 2x4s for the main frame and 1x4s for the trim pieces on the bed. The headboard was made using 1x6s for the frame and 1x4 scrap pices from the slats used for the vertical pieces. Used a Minwax water-based "pearl gray" stain for the 1x8 sides and a Minwax oil-based walnut stain for the frame and trim pieces. Used the K5 Kreg jig to join most of the pieces. The Kre Jig was a new purchase and my advice would be to practice with the jig before starting the project. It takes awhile to get the hang of the jig and to make sure that you are using the correct screw lengths. The very complete and detailed plans can be found in the attached links.
I added a bench with hooks for hanging coats and storing shoes. Are use the plants from the mudroom closet on this website.
Built 2 of these for some friends. One of them plans on putting it in the wall! Loved the build and they love the product.
Husband built the loft bed plans for our oldest daughter. She said this was he was the best dad in the world!
I read and studied every comment and brag post about this shed. I must have read the plans a hundred times before I got up the courage to tackle it. It’s a very attractive and affordable shed design. I thought a double wide version would be perfect for our long, narrow side yard, and it is! I mostly stuck to the plans except for a few things. I made it 10” taller overall so there would be plenty of head clearance under the doorway. That was a very easy modification. I used 2x4s for the walls instead of 2x2s because we have high winds in our area. That modification was a little bit more challenging, but I planned it out and it worked! Also I used 2x6s for the headers instead of 2x4s. I also added 2x4s at the thresholds because I couldn’t image making it stay square without them. I basically made two sheds joined by a common wall in the center. I did not increase the depth, mostly because I was afraid to mess with the angles and how that would change the pitch of the roof. Joining two sheds together meant that I didn’t have to put the exterior pickets on the middle wall. But it also meant that I had to build 4 doors. Yuck. They were difficult to get lined up and level, but I was amazed it actually worked and that all the doors operate properly and smoothly. I was questioning the wisdom of my decision to do 4 doors while I was in the thick of it, but now that all the work is done, I love that I can open all 4 doors and have easy access to absolutely everything in the shed. Very convenient! I told my dad I was building a shed and he recommend that I add cross braces. It seemed sturdy enough without them but it certainly can’t hurt. My dad knows everything about building and I know nothing, so I took his recommendation. If I were to do this again, I would overlap the cedar pickets by 1” instead of ½”. My pickets were not quite wide enough. I could swear they shrunk after I applied the stain/uv protection. I used liquid nails along each lap but it didn’t hold. Where the glue DID hold tight, the wood split lengthwise. Anyway, for whatever reason, gaps appeared and I spent a fortune on clear silicon applied on the interior walls to make it water tight. I had to keep going back for “just one more tube.” So with hind sight I would have been better off just buying a few more pickets and increasing the overlap. Another thing I might do is make it deeper. I decided against it initially because I was worried that increasing the depth would make it flimsy. Now I don’t think that would be a problem. This shed is sturdy. I can’t say thank you enough. Great plans and a great website! I am completely hooked.
Mon, 11/11/2013 - 14:51
Thank you Ana! I can't thank you enough for introducing me to the best hobby ever. Your plans are the best!
Mon, 11/11/2013 - 12:01
Great Work. Any estimated cost of what this would cost to build?
Mon, 11/11/2013 - 14:56
I kept every receipt from caulking gun to stains and brushes. I just now added it up and it came to (cringe) just under $900. But I have lots of left overs for another shed and it's still a huge bargain. Other sheds that are similar to this plan are much smaller and start at $1,999 and up! I think it was well worth it to have a sturdy bargain shed that's also beautiful.
Sat, 01/22/2022 - 23:01
It looks great with the stain. I think your Dad's advice was good. Also I like that the heavier timbers add rigidity to the frame.
Built this bunk bed for my two boys. Used the sweet pea storage stairs plan as a starting point and altered things from there to suit. The wall is just 3/8 plywood cut into planks and painted various colours.
For my son's new black lab pup. Started with rough cut maple.
I have tried all sorts of nest boxes. No one ever used them. I decided to make the one from Anna White's site. I used joinery to attach the various pieces. The best thing of all: I find girls sitting in the boxes and take eggs from them. It really is awesome. I got a photo with real eggs and you can also see the wooden eggs to entice them to try it out. Thank you so much! I will build another one for the other side of the the wall.
Fri, 04/21/2023 - 10:18
Love the fresh eggs, looks like a win to me! Thanks for sharing.
Comments
Ana White Admin
Sat, 03/25/2023 - 09:23
Cool hangout!
Beautiful set up and very inviting, love it!
Ana White Admin
Sat, 03/25/2023 - 09:23
Cool hangout!
Beautiful set up and very inviting, love it!