Built-In Corner Media Cabinet
![](/sites/default/files/3154838417_1386892748.jpg)
This was a particularly fun build for me since it was for my little guys' room! Hope Santa fills it with tech goodies on Christmas!! Please check out the details on my website! Happy Holidays!!! :D
![](/sites/default/files/3154838419_1386892748.jpg)
![](/sites/default/files/3154838418_1386892748.jpg)
![](/sites/default/files/3154838420_1386892748.jpg)
This was a particularly fun build for me since it was for my little guys' room! Hope Santa fills it with tech goodies on Christmas!! Please check out the details on my website! Happy Holidays!!! :D
Made this little chalkboard shelf/key holder for my niece. She is building a new house and I thought it would look nice in her kitchen or entry way. It was inspired by Ana's "easiest chalkboard shelf from scraps," but I routed the edges of the 1x12 and add different hooks for keys.
Build this 4x4 Truss Beam Table for my wife's Birthday. For this table however, I did change the top and used the Fancy X Farmhouse Table top shortened to 7' (84"). I also used Whitney's plans on where to put the pocket holes (link provided in 4x4 Truss Beam Table Plans). This is my first wood project and with that first time using an Ana White plan. The plans are awesome and very easy to follow, we can not wait to build the matching benches! Biggest tip I have is do not wait to long after buying the boards to start the build, the wood sat for about 3 weeks(due to work travel) and some warped a lot.
I first made a set of these for my wife to use on the deck. She liked them so much that she's using them in the living room! (Second photo.) These were made from rough lumber left over from a building project so took a fair amount of time to cut and prep. I don't have a planer so the belt sander outside was put to good use. Then, to make them them fit well, I recut the sides, and rather than pocket holes I glued them into a plank before cutting the rounds with my table saw. That also gave me a tight flat top.
Her friend saw them and wanted a set, so here they are. Again I recut the sides and glued them to create a smooth plank. This time I used the router and a circle jig to cut the tops, giving me a much nicer finish. They will be stained mahogany and finished with multiple coats of polyurethane.
The large one I simply upsized from the original plan, roughly scaled. It is 22" tall, made with 2x8 lumber selected and purchased at the box store. My wife's friend is totally delighted with them! Thanks Ana for the inspiration.
I needed a closet organizer for my daughter's room that could grow and change with her age. Right now it needed to have lots of shelves at her height to hold the massive amount of stuff an 8 year old can accumulate.
Once she transitions out of the toys, I plan on moving the shelves all to one side or the other for shoes, and adding another rod. Another possibility is shoes in the door organizer and 4 sections of hanging clothes...regardless, the end result has options that will grow with her!
I was able to keep the cost of this down because I used all scrap plywood to make the drawers. I did splurge in S4S pine lumber rather than trying to make rougher cuts nice.
On the left door is Ana's Behind Closet Door Storage plan as well :)
Sun, 02/05/2012 - 11:17
I love the idea of the stuffed animals on the door! Those things multiply so fast and get in the way of making the bed - great closet!
Sun, 02/05/2012 - 18:58
Right now DD's room is a blank canvas. One of the first projects (after getting her window in) is to figure out the closet. I think this will be my inspiration!
Looks great!
Sun, 02/05/2012 - 19:25
Thank you! I am loving how organized her whole room is because of the closet being in good shape. And everything has a spot now, so it's easy for her to get it back where it needs to go!
Oh, those stuffed animals. I mentioned to her the idea of paring her collection down and she was horrified at the idea!
Mon, 02/06/2012 - 06:40
A shocking notion. I think there's a box in our storage area with my wife's stuffed animals somewhere. Keep in mind, my wife isn't a 20-something who just moved out of her parents' house. We have a grand-daughter. Stuffed animals are forever. In fact I think one of my nephews still has my teddy bear.
In reply to Paring Down Stuffed Animals?! by claydowling
Mon, 02/06/2012 - 09:04
...at the bottom of the basket where her stuffed animals used to live, were two of mine from when I was little, lol!
But you bring up a good point about forever. I think I need to put a ban on any new ones joining her stuffed animal family from here on out. Pretty soon I'm going to need to add another closet to her room just for those!
In reply to drawers by Guest (not verified)
Sat, 06/30/2012 - 20:46
Hi--sorry I missed this comment somehow this spring! I blogged the entire build, but here are the posts specifically on the drawers:
http://pinktoesandpowertools.com/2012/01/28/how-to-build-a-closet-organ…
http://pinktoesandpowertools.com/2012/01/30/how-to-build-a-closet-organ…
http://pinktoesandpowertools.com/2012/02/01/how-to-build-a-closet-organ…
Here's the reveal post with links to all the other posts:
http://pinktoesandpowertools.com/2012/02/05/how-to-build-a-closet-organ…
Thu, 02/23/2012 - 19:12
The easiest way to do a quick drawer, if you don't know how to do dovetails (and that's a simple skill totally worth learning), is to drill holes through the sides and into the front, and pin it with hardwood dowels. Use a domestic hardwood, you'll be a better dowel and a dimension that matches drills you own. The cheaper white imported dowels don't match any drill diameters that I can find.
In reply to Me likie! by hoffer5353
Sat, 06/30/2012 - 20:53
Here is the post with the plan mock-up with dimensions:
http://pinktoesandpowertools.com/2012/01/24/how-to-build-a-closet-organ…
It says 65.5" wide on there, and I don't believe I made any changes, so that should be accurate. I think you could get away with having an approximately 46" wide closet. You could have the drawers in the middle and then 12" wide shelves on either side that would fit sweaters, jeans, shoes. If you made them adjustable like mine, then you could really maximize the space in there. Just make sure you give yourself plenty of room in front of the shelves if there is wall there--you want to be able to easily take things in and out.
Good luck!
Tue, 02/05/2013 - 15:08
I'm looking forward to doing this to my closet too!! It's a good project to take on once you want to try out drawers for the first time--since it's behind doors, it doesn't have to be perfect. Good luck!
My husband and I built this together. Once we figured out how to use a Kreg Jig it was sooo easy!! I stained the top in English Chestnut and then chalk painted the based.
I have a friend who had a dream to have a Thanksgiving table that would seat her whole family! She asked for Two extra benches for the ends. She loves her new table, and I loved building it for her!
I was looking for a shed to keep pool towels and other deck and pool items. This shed hit every feature I was looking
for. My husband loved the plans. He's always saying he can build anything with a measured drawing and a
cut list. The only thing we changed was the roofing material. we were given some metal roofing by a friend.
Mon, 06/26/2023 - 12:20
Fabulous, so glad you found our plans helpful! It looks great.
I built this 3 times, the first time, I wanted to beef it up, so I took it apart and decided that I was going to use a frame to make it more sturdy. This was for my 6'4 football playing husband, wanted a place for his sweats, jerseys, etc, so the 2nd one is the white beadboard one in the pic....Then, when I finally did move it into the house, boy I missed it in the garage. I had been using the baskets for my paint brushes, tack clothes, tarps, etc.....So, I built another one, just for me and my sundries. That's the one you see in the pic that is just the frame with baskets. My 180 6 ft tall son actually was caught sitting on top of it, and I'm proud to say, it held, no problem. I love Ana's plans, you can follow to the tee, always a good idea, or add in your own flavor. It's like adding your own spice to the soup. This is one of my favorite pieces to build, used my kreg, and the one that gets the most compliments and requests. For the top, I didn't have a 1x16 on hand, so I kregged together 2 1x8's. Absolutely beautiful.
Tue, 02/28/2012 - 13:14
Durability was my one concern with these plans, so I am so glad you shared these modifications! I am a very visual person, so seeing them made with the 2x4 frame has really helped me know how I want to build these. Thank you for sharing.
Tue, 03/20/2012 - 10:00
Both of these are awesome! They look great and STURDY! I'm inspired again :~)
Thu, 09/12/2013 - 02:25
very durable, glad I went with the 2x4's, both going strong.
Fri, 07/17/2015 - 18:21
Long shot since this was posted so long ago but I would love some more details on the supply list for this particulr version of the laundry dresser. I really like the bead board and frame but am struggling with the dimentions of all of the 2x4's for the frame. Thanks!
I built this table from the all the great info on this site. I used Purebond Plywood in Oak for the top and pine for the base. I created an opening for quick access to items I use frequently. I also used cup hooks attached underneath the tabletop for my scissors. Painted in Ultra white from Valspar with several coats of Polyacrylic. I used my Kreg Jig to build the whole thing.
Just finished this beauty, entirely made with 2x4, plans were modify to match our outdoor sofa and coffee table. I think our best looking project so far ;) Thank you for inspiring me to build !!!
In reply to Very nice! by Ana White Admin
Tue, 03/01/2016 - 18:13
Little by little I am transforming my ugly concrete patio with no view in Zen garden...
Tue, 03/01/2016 - 18:15
Little by little I am transforming my ugly concrete patio with no view in a Zen garden...
Tue, 03/01/2016 - 18:16
Little by little I am transforming my ugly concrete patio with no view in a Zen garden...
I built this bunkbed for my boys bedroom based on Ana's plans with a slight modification to make it more fun for them- a climbing wall on the end instead of a ladder! I followed Ana's plans which were easy and clear to understand and the result is super sturdy and strong! We had IKEA bed slats already and they fit perfectly on the cleats to hold up the mattresses. I simplified the guard rail a bit and used a dark teal paint to finish. A 10 pack of climbing wall hand holds was purchased from Amazon (link: https://www.amazon.com/gp/product/B074CM4DBN/ref=ppx_yo_dt_b_search_asi…)- I needed slightly longer bolts than what were provided to go through the 2x6s but found what I needed at a big box store. My boys (6 & 8) absolutely love it!
Completed the corner bookshelf (we opted to not use cupboard doors on the bottom) in two afternoons.
Beth and Jess Wegz
So I wanted a coffee table for my new apartment and couldn't find one I liked so I decided to build one. I wanted a zen theme for my new place so I took this plan and put a twist on it. I built it basically to plan and then carved out some Asian symbols and filled them with Woods metal. I sanded down the inlays, stained the table, distressed it, carefully cleaned up the symbols and then added a couple coats of poly. Came out pretty cool!
This was a really easy build and has brought much needed order to my little one's stuffed animal collection.
This table was modified because my dining room is really small. So the table is 71"long x 35" wide. This was actually my second attempt on the table top. The first attempt I only used kreg screws and no glue. To say that it warped is an understatement. This second attempt I used kreg screws and biscuits. For the breadboards I tried something new and used Rocklers Beadlock system. I also used Z- clips to mount it to the base so that as the wood expands and contracts it will hopefully not warp. So far it's remaining pretty flat.
Thu, 10/17/2019 - 06:16
Not sure why this posted as Anonymous but it's mine, ColleenW. Thanks for looking.
Just delivered these Adirondack chairs to my son and his GF as a housewarming gift for their first home. They selected the colors and they turned out perfect! I used a countersink for the front screws and filled with plugs so it looked very polished!
This is my first build and im really proud of it. We needed a new platform bed to fit our new matress! Yeah! a queen size bed! I discovered ana's blog and i got really inspired by all the projects in the blog! For the construction, i used birch for the showing parts, pine for side rails and center support and spruce for the slats. Actually, i haved cut de sides and builded the legs then i oiled evething before assembling. I used my Kreg Jig r3 to join the sides and i used a corner metal bracket to join the legs to the sides! Everything is attached from the inside, so no filler needed! I also decided to use 1x6 for the legs to get a taller bed. If you want your matress lower in the frame use 2x4 instead of 2x6 for the center support. Adjust de side rails to fit with the 2x4. Can't wait to build something new! FYI: I know my english is bad but its not my first language!Im french canadian!
Sat, 02/18/2012 - 08:17
Your bed looks good! It makes a nice focal piece for the room.
Your English is fun to read!
This is a play kitchen I made for my 2 year old. This was the first big wood project I have done. The instructions were easy to follow if you stay organized.
Wed, 12/25/2013 - 04:52
This kitchen is great! The details and colors are awesome, and you did a fab job on this build! Merry Christmas!
Comments
exuma_momma
Fri, 12/13/2013 - 05:38
Beautiful!!
Great job. The molding looks perfect too!! I love the name of your site. I live on an island and when I'm working on stuff I like to wear my cowgirl boots :) my friends all tease me for them...but I love getting 'sawdust on my boots'! Again, great job!!