Community Brag Posts
Leaning Shelves
My 5 year old son wanted a "Lego Creation Display Thing" to exhibit all his hard work with his beloved Legos. I knew this plan was perfect.
After styling it for the photo, I didn't want to give it to him, but keep it for myself instead! I think I need to build another one. Or two.
The building only took a few hours, but I spent a LOT of time on sanding and painting it perfectly for a professional finish.
I bought 1x8s instead of 1x4s and ripped them on my table saw, becasue I was able to get straighter boards that way and it was a tad cheaper.
(Bonus Brag: I refinished and reupholstered that blue chair!)
Comments
My spin on the Counter Height Farmhouse Table from Amazon White’s free plans!
The counter height farmhouse table plans were so helpful! Thank you Ana White! I replaced plywood on top with 2x8s and added a shelf underneath the table for some kitchen storage! I am in love thanks again😍 Follow me on Instagram @abbbclark_homeee for more home renovations, decor and DIY!
Comments
Star Closet
My husband made two of these star closets for our girls and all of their American Girl Doll clothes and accessories. He added a drawer to the bottom so that they could fold pants, shorts, and swim suits and keep them there. He also built three small boxes to hold the smaller accessories, like shoes, hair bows, and hats. It turned out beautiful!
Comments
corner shelf
This was very easy to make. Stained with minwax dark walnut. It's very sturdy too.
Comments
Newbie
My first build in my new house I didn't think it would come out so well. Thanks for the plans. I love working with my hands
Comments
Sat, 04/24/2021 - 05:20
Lumber is quite expensive…
Lumber is quite expensive right now so I'm not sure what's next but once I figure it out I'll be sure to post it :)
Puppet Stage
I changed the this plan to make it into a puppet stage for my niece's birthday.
I added a curtain rod and made some curtains to fit. I put two shelves in the back, but I put dowels in along the shelves so she could put her puppets on them for easy storage. I used a piece of a sheet of wainscotting for the front of the bottom.
I also put chalkboard paint at the top to allow her to write the name of puppet show that she is performing.
I was able to use some scraps that I had around for quite a bit of it, so it was pretty inexpensive.
The pictures are not great and I wish I would've taken pictures of the back before I gave it as a gift, but the kids are having lots of fun with it. I'll have to take some better pictures the next time I visit.
Christmas Chalkboards
I wanted something special to give the kids in our family for Christmas so I made them all these magnetic chalkboard easels. I gave them chalk and magnetic alphabet letters to go with it. The kids ranged from ages 6 months to 8 years and they all loved them!
Comments
Mon, 02/02/2015 - 12:21
Thanks Ana! I am having so
Thanks Ana! I am having so much fun using plans from your site. My husband created a monster in me when he helped me start learning how to use the power tools last Christmas. Now I just can't stop. currently my daughter and I are working on a large storage bed for her. You have inspired me that nothing is impossible!
Thu, 04/30/2015 - 01:19
Great idea to make these
Great idea to make these magnetic as well. I was just wondering if you would be willing to share what you used to make them magnetic. Thanks in advance
K
Tue, 05/12/2015 - 05:31
magnetic
sorry just saw this comment - I used the magnetic primer by Rust-Oleum. Used this in place of standard primer. You have to use at least 2 coats and even then, it won't hold a very heavy magnet. i would imagine the more coats you put on, the stronger it will be. It's not cheap, but was great for this application.
Shoe Shelf
Husband wanted a shoe shelf for the back door entry, and I needed a quickie weekend project, so this fit the bill. Adapted from fix this build that's plan, but modified for a smaller space and less shoe storage. Easy project, and looks great.
Cedar Herb Garden
I had the fun of working with my daughter on this project.We recently moved closer to her in Colorado and we are just starting to get into wood projects. Thanks for the great projects!
Aron
Comments
Kentwood bookcase - upsized
I made the original plan higher and wider, and added an extra shelf. Very pleased with the outcome!
Comments
Wed, 02/12/2014 - 09:11
This looks sweet. Do you have
This looks sweet. Do you have the dimensions to this upsized kentwood bookshelf? I'm afraid I'll screw it up if I try to add lengths to the original plan.
1x12 Wood Bulk Bins
I made my bins 36 incheg to fit my space. My big box blue store has 1x12x8 utulity shelving boards for $13 compared to $27 for the 12 footers.
Comments
Tue, 01/27/2015 - 15:15
This is super cute! It looks
This is super cute! It looks similar to mine! Thanks for sharing!
Fancy X Farmhouse Table
This is a table and bench that I built for our patio!
Strawberry planters
Using plans from this website here are pictures of two, five tier strawberry planters.
Each tier is wide enough for 4 plants in one litre pots.
Comments
Workbench Console
When I first saw this and showed it to my wife it became number one on my Honey Dew list. I did not like the open space between the bottom shelf and top, saw on this site where someone put a wine rack of shorts as a second shelf. So I did the same I used 1x4 instead of the 1x10 used on bottom shelf. I also used 1x4 for the top to help eliminate the gaps between the boards that the 2x4’s would cause. To help give something for the 2x4’s and the 2x6’s to attach to I screwed 2x2’s to the 1x4’s around the edge. Gives the illusion of 2x4’s and makes for a very smooth and flat surface for the top.
I haven’t put on the Polyurethane yet due to Cold temps but will as soon as it warms up if that is ever going to happen
Comments
Fri, 03/29/2013 - 17:52
You Fooled Me!
When I first saw your build I thought what a nice small workbench. You even put in places to store clamps!! Then I noticed the girly stuff on the top and realized that it was really inside the house. Really good work. When you can put the poly or antique oil on it the piece will really shine.
Sat, 03/30/2013 - 13:11
Thank You Jake yes my wife
Thank You Jake yes my wife loves it I am finishing up on the hutch for the top now and soon I will get the poly on this and then if I can keep the wife from looking on here I might be able to build a work bench for the shop LOL
Miter Stand and Rolling Storage Carts
I'm so happy that I found the plans for Ana's miter stand and rolling carts! It was just what I needed for my garage shop... so everything can be organized and stored compactly but things can pull open and expand when I have a project (which is all the time, actually).
The actual miter stand was super easy to build - the carts took a few days working non-stop (when the kids permitted).
I made a few obvious changes from the plans:
-made deeper shelves on one of the carts
-added drawers on one of the carts
-added ped board on the end caps of miter stand
Something I didn't consider before building this was the slope of our garage floor. There's a 3" difference from one end of the legs to the other so I had to use riser blocks to get everything perfectly level. Unfortunately there's no way to level the carts as they aren't stationary but they slide in/out just fine.
I'd recommend this build to everyone! Check Home Depot clearance often for deals on plywood!
Comments
Wed, 02/07/2018 - 11:35
I cannot find the plans
Would you be able to share the original plans? It seems that once the contest ended, the links to the plans stopped working.
2 X 4 Adirondack Chair
I decided to try to do some chairs for my backyard , guess what ........ i end up with very nice chairs.
It's very comfortable and looks great. My friends already asked me to do some for them.
Thanks Ana White for the great free plan.
Comments
Tue, 04/13/2021 - 21:01
Yes yes yes
Thanks
Yes i am busy
Did 8 already and have 8 more to do
Great chairs
Farmhouse Style Rustic X Coffee Table
Ana's design caught my eye and I had to build one that was similar. I decided to modify the top because I really like the look of breadboard style tops. So the main difference is that I cut the top boards 41" long and added two 2x6 pieces for breadboards (about 27-27.5" long). So the total width still comes to 52". Turned out pretty cool!