These plans came at just the right time for us as we needed to move our toddler to her first twin bed! I was set on beadboard for her room, so I modified the plan slightly by gluing the sheet of beadboard to the plywood, adding the molding to frame the beadboard and also adding a couple of inches to the legs. The thickness of the beadboard did not allow the back of the headboard to be flush with the legs, but it really isn't noticeable.
This bed is easy to build and extremely sturdy! We spent much more than the $75 listed on the plans, using both pine and poplar as we shopped around checking out our local retailers. Our local furniture store's least expensive solid wood bed was much scrawnier and $250 plus delivery, so we still came out ahead! The mattress is a 14" memory foam mattress bringing it much closer to an average bed height, but still very accessible for our 2 year old.
The bed only took a couple of evenings to build and the headboard came together in just an afternoon! However, most of that with a 2 year old, so it could come together quicker if you are sans kiddos :)
Comments
sarahwilley2
Sat, 09/01/2012 - 10:04
So instead of using the 1x12
So instead of using the 1x12 for the shelves, you make them with (looks like) 2x3 or 2x4? I'm trying to figure out how to make mine deeper than the 16 inches it's drawn up for.
ussreddawg
Tue, 09/04/2012 - 14:01
X bench plans
I ripped 1x12's down to 1x4 and then used biscuits to edge join. I used a 1x2 for the edges (face plate) to add strength. I ripped them down because I like the look of smaller width boards and also my 1x12 were a little warped. If you have autocad I can send you my plans.
sarahwilley2
Tue, 09/04/2012 - 15:51
I unfortunately don't have
I unfortunately don't have autocad. I did some sketching and drawings and came up with that I'm shortening the length of the table and making it deeper. It'll be 46 inches wide and 24 inches deep. I'm using 2x6 for the bottom shelves and 2x4 for the top. Where I want to put it is limited space. Thanks for the advice!