Wall Desk
We were looking for desk that will grow with our family. This was the prefect plan. We went back and forth with the hinges and decided the chain would be best. We also added magnets to use as closures.
We were looking for desk that will grow with our family. This was the prefect plan. We went back and forth with the hinges and decided the chain would be best. We also added magnets to use as closures.
Lots of sanding and staining but love how everything turned out. Very sturdy and doesn’t creak when you jump into bed.
My handy husband whipped this little bed up from the leftover wood of the rustic "X" end table! I love it so much, a great toy / newborn prop!! I wanted to finish it with the steel wool/vinegar method, but it was too late, he already painted it. I love it just the way it is! Thank you for the awesome plan!!
The plans make this huge! I had to narrow down, and adjust for shelve opening. Hardest part were getting slides situated on sides, there was just enough difference from 2x4s to upset slides a little. I recommend going for the longer slides, if u r running into the same issue.
Love the plans and love this site, so much inspiration here!
Thanks Ana
dan
My Husband made this twin bed for our son off the Alaska Cabin Bed plan.
It was easy enough for him. To complete without any mistakes. Took aprox 3 days to complete, about $130 in lumber. He used
6 (pine)2x4's & 1 sheet of cabinet grade Baltic Birch. He added a center support beam.
Painted a white trim around drawer fronts coordinate with white nightstand. Used magnet clasps on drawer flaps. The bed is solid enough for us to lie down and read bedtime stories with our son, and the bed doesn't even creak a sound. Easy to slide mattress off a little and change the sheets. I would highly reccomend this plan to others.
I love this site and the user friendly plans. I used the suggestion of turning the 2x4’s but I think it would have been better to have more to screw the top boards to if I hadn’t.
Didn't use the wheels, so I lengthened the legs to compensate. Also I didn't make it round but instead cut the corners off and used a router on the edge. We use it mostly for puzzles.
Used some cool old pallet wood to put together a dog food bowl stand I've been meaning to make. My big 10 year old lab is getting a lot slower and struggling a little bit so I thought this could help him out some and get his food and water closer to his face. Winged this one. Had a vague idea in my head that sort of evolved as it progressed. Used some left over 1x4 lumber to build a simple frame, and encased it in the pallet wood to give it the wood crate look (jigged some hand holds in the side to give this same look) . Used jig saw to cut the holes out of the 2 top boards for the bowls.
LOve your site for basic plans, easy to follow and modify. Used the step stool and created personalized ones for clients.
Keep the good ideas coming
John
I followed the directions for every step but the down strut supports in the middle of the table. I reversed them purely for aesthetic reasons, I thought i looked better that way.
I wanted to build some cabinets to his our computer, stereo, game consoles, and seeing machines. I needed something that would allow a remote control to work through, so I used decorative metal sheeting found at the orange hardware store. They're built to be nearly flush with the fireplace. The left cabinet is made of 1x8s and measures 36"x36". There are 2 interior shelves. The shelves are slightly shorter cuts, measuring 34 1/2. The right cabinet is the same as the left, but with a 18"x36" unit kreg jigged to the front. That was to accommodate the larger media units while keeping the cabinet flush with the fireplace.
The fronts are just 2" trim frames with metal sheeting screwed to the inside. I used metal corner braces to hold the corners in place. They're mitered corners. The hinges are cheap $2 hinges and magnetic closures hold the doors closed.
I also made the mantle. It's a piece of 1x12 on top with a flat foam piece of molding and 2 corner pieces.
I combined the Narrow Farmhouse Table plan with some changes and Bluedinosaurs tutorial for making a sewing table. http://bluedinosaurs.com/diy-platform-sewing-table/ It came out beautifully!
Thanks for the great plan!!
2x4's and 2x8's kept my cost way down! The top was finished with minwax provincial stain and a few coats of minwax polyurethane to finish it off. Joined with my Kreg jig throughout. A very fun project!
This is a coat rack that I recently built for a friend of mine who was struggling with a way to organize her kiddos' coats and packs. She doesn't have a coat closet off of the entry way, so we installed this wall-mount tree design on an interior hallway as you enter the home. This would also be cute in a kid's room or a mudroom. I posted step-by-step instructions with pictures on my blog at www.momthebuilder.net. Let me know what you think!
Tue, 12/08/2020 - 20:51
It looks like your blog is down. Is it posted anywhere else, or could you send the plans to me?
Our attic bedroom had no closet space or storage. I designed a system with shelves and hanging space along one end wall. A freestanding vanity table was discovered at a Habitat ReStore, which fit the space perfectly. One side of shelves is for clothing, the other side is for books and display. A long shelf across the entire top serves as the closet rod as well as display space.
This is the largest piece I have built. I wanted a buffet and hutch to hold all my crockery. All the large pieces became the display pieces in the open shelves. Ana's plans makes it so easy to modify and build
Thu, 10/01/2020 - 19:07
I added wallpaper to the back to give it a custom look. My hubby help put some lights to finish the piece.
Armoire for 18 inch doll. Constructed using Ana White guide, with small alterations to doors. Stars were not cut, instead small wooden knobs were used. Two stars were painted pink and attached to the doors, to give the American Girl feel. The doors were difficult to keep shut, and an attachment was installed at the bottome of the doors to aid in keeping them closed. For any future builds, we will scale down the size of the armoire. It is quite large for an 18 inch doll.
This is my second table which I built for our new home in the Olympic Penninsula. Moved closer to our kids when we retired. It was wonderful to have our kids, their spouses and friends gathered around the table for dinner, conversation and laughs.
This was a custom build for one of my clients in San Diego, CA (Encinitas). She wanted a 9 foot buffet to store all of her kid's toys in :).
We came up with the design, and I built it right before my wedding (probably my most stressful build! haha).