Community Brag Posts

When my husband left he left behind an entire tier of our yard that he'd used to throw sticks, branches, clippings, dead plants, you name it for years. I cleared the mess last spring and am excited to make it beautiful this season!

rustic bench, modified length and omitted x detail, painted numbers

My sister wanted a step stool for her grand-daughter via her daughter-in-law. Like our mother and grand-mother before us, we stood by the sink with our hands in the wash water "helping" with the dishes. She asked it I could build a stool. After searching through several plans, I came across this vintage step stool and changed it up a little for the personal touch. I added the cartoon characters to fit with my great-nieces theme and she now has something that she can "brag" about as she grows.

Made this ladder blanket rack and stained it. Only my second project that I have stained. I’m not around the learning curve yet. Works very well and hides our robo vac well. I did have a mishap - lesson learned don’t put kreg screws in for a test fit and then remove them. All of the holes stripped out while doing final assembly after finishing and I had to plug the holes to be able to finish it.

These desk sets were made from scrap wood and left over finishes, and are the inspiration for the desk bling accessory set plan, the cedar 1-board desk accessory set plan, and the 1-board cedar 2 drawer desktop storage cube plan. I had a ball planning and building these 4 sets over the summer, and gave them to the girls at work today as Christmas gifts. They were a big hit!

The cube sides and drawer fronts are made from scraps of wainscoat paneling.

The gray set is a distressed finish (not shown - the matching cube storage included pulls painted in oil rubbed bronze). The Espresso painted set received pulls spray-painted in silver. The Onyx set was stained with Minwax Express color, with pulls spray-painted in silver. The blue set received 2 coats of paint, and a Walnut glaze. Those pulls were done with a gray paint wash, with sea glass pebbles glued on the fronts.

The pulls are all made from pieces of S4S moulding, sanded and then painted. These also received a poly topcoat before attaching with super glue.

Total time for each set is about an afternoon each. Each set received multiple coats for the finishes, but was well worth the effort.

For some added "bling," I raided my stash of sticky-back felt scraps and applied to the bottoms of each piece, along with the drawer bottoms.

I loved making this bed. This was my first experience using a Kreg Jig and it was great! We added three inches to the height of the bed so that my daughter could stand up for the next two years or so without bonking her head. We opted for rungs instead of stairs to save more space. We also used 2x4s cut to width for bed slats instead of a bunkie board.

Unfortunately, I don’t have a picture of the finished product, but these are the table tops I built for couch tables in my basement. First time working with resin, I learned a lot!

Buildermomma

Have you checked out prices at framing stores lately? Since I didn't want to pay $250 for a frame, I decided to make one out of some spare 1x4 Douglas Fir that I had. It's a single board with a router cut at the edge for detailing. I routed a rabbet onto the back, and kreg-jigged it together. I distressed the wood by beating it with a hammer and chain.

Prior to completing the frame, I took a sample piece to the framing store (who would be matting it) to make sure they could work with my rabbet size. I ended up having to make it deeper and wider to accommodate them, so I would advise doing this if you're taking it to a framer.

I never dreamed I could actually make a frame, much less a piece of furniture. Thanks so much to Ana for sparking all of this. I've found my creative calling thanks to her!

What a great little gift idea and made this in about 4 hours. HD had 2x2 poplar turning blocks that were perfectly straight and pretty smooth to start with. Required minimal sanding. Each board was $1.98 but was 32 inches long. So you have to buy 15. Start with the larger cuts first. The end of each board will produce one or two of the smaller cuts. Used the food coloring and also coconut oil on the blocks.
Great project, had fun doing it.

Followed the instructions. Very easy to follow.  Made California King size.

Sofa with 2 ottomans and 2 side tables.

Vinny M

I loved this bench when I saw the plan and had to try it. Thanks Ana!

This was an easy plan to follow! We built these for around our fire pit. The finishes is what took the longest. The tops are stained American Walnut.

A $10 Mirror framed out with some 1 by 2, 1 by 3 and 1 by 4.

Stained black and then 2 coats of white paint sanding after each to give a rustic/antique look.