Storage Captains Bed
So this was a really fun project from start to finish, I wanted a storage bed with a place for my son to showcase his Super Hero collection!
So this was a really fun project from start to finish, I wanted a storage bed with a place for my son to showcase his Super Hero collection!
My wife and I built our whole bar, from the shelves, bar, and the kegerator! We needed stools to round out our endeavor but we werent willing to shell out the kind of money required. My wife found this plan and we morphed it a bit to meet our needs. The KREG JIG saved us big time! The seat upholstry took us a bit of time, but we figured it out thanks to YouTube. Great project for a weekend, took us a tad bit longer due to the arrival of our daughter but, we still got it done!
Great plans allow for versatility and easy customization. Put the whole thing together in a day w/ one other person. My set up is 16' long - 5' on the side shelves and 6' for the workbench. Added a pegboard and fluorescent light under the top middle shelves. I'm also designing a slim drawer to go under the workbencheck area. Thanks a bunch!
My husband and I built this table as our first project. We followed all of the dimensions from Ana's "Small Sewing Table" project here: http://ana-white.com/2010/10/plans/sewing-table-small-spaces?page=1 The only thing we changed was the size of the table top and the legs. We were worried about putting my heavy sewing machine on top of the leaf called for in the plan, so we created gate legs to support the leaves. Since the legs were going to be folded up in between the base and each leaf, we extended the center portion of the table top to accommodate the change. After it was assembled and stained, I decided that I didn't like the solid color, so I stenciled on a pattern with white latex enamel paint (what I had on hand) and continued to paint the base. After lightly scuffing it up with the sander, I layered 3 coats of poly on top. It has held up well, even after many large quilt projects! I just LOVE my sewing table!
Fri, 08/05/2016 - 13:41
Hi there. Could you please tell me what the brackets are you used with the gateleg? Do you remember where you got them? Thank you!!!
Fri, 05/26/2023 - 16:59
Hello I was wanting to know how to make the Gate-Legs for this project? Like the measurements and such. Thank you.
I have built various projects. A work table, a barn door cabinet and couple of Farmhouse nightstands for my grandson and granddaughter. It was fun!!
I used Ana's plan as a base.
I changed it from 8x8 to 8x12, made the 4x4x8's to 4x4x10' for a higher main platform and swing platform, and added a 12' long monkey bar set to the other side. Also, an 8' climbing wall and a plank walkway to accompany the two slides.
For the clubhouse, I used Hardiplank 4x8 sheets for the siding and an EZ-Framer kit for the structure itself.
The slides I purchased from Lowes, monkey bars from Amazon, and the swing frame braces from Amazon as well. The swing kits I got from ebay.
I built the coat rack along with the mail sorter and rustic bench for the long hallway to the garage since our new house doesn't have a mud room. I modified it to a length of 6'. All but a couple pieces are made from poplar. I burnt the stained pieces with a torch, then put a quick coat of Special Walnut on them. The painted pieces are Rustoleum Weathered Wood. Hooks are from Home Depot.
This plan is exactly what I needed for my workspace. I ended up adding some slat wall pieces and cabinets above from cubicles in an old office nearby that closed down for a tool wall and storage. I left the right opening empty due to how unlevel my floors are. I may close it in later with drawers or cabinets, but it will be my sitting workspace for now. I trimmed out the edge with 1x2s and painted and stained everything for aesthetics.
Mon, 03/06/2023 - 17:36
WOW, this looks so good! Thank you for sharing your amazing work.
I slightly modified the Rustic X Desk plan to make my L shaped computer desk with a monitor platform! The desk surface is Shou Sugi Ban with an epoxy finish. All made from stock lumber and a lot of pocket hole screws. Thanks for posting your plan Ana to give me the idea! Construct for around $200.
Tue, 03/14/2023 - 18:34
Love your modifications, additions and finish! Thank you for sharing.
Here are the pictures from the finished Banquette. Thank you for the free plans. Very much appreciated.
by Jason
My daughter loves her new couch! This was such an easy project and a great way to reuse an outgrown crib mattress.
Fabulous home gym by Nailgun Nelly!
*Incorporated and modified the grand waterfall console plan
This tower plan was perfect for re-using some already stained 1x12’s I had from another project. It fills up that little square of unused space at the top of the stairs, and gives us extra storage for towels and TP for the 3 bathrooms in our house. I substituted 1x2 and ¼” plywood for the door and used some 1x2 and 1x3 to attach and build it in. This project has been up for a couple of months now, and has come in handy. This was my first attempt at doing something as a ‘built-in,’ and it gave me confidence that we could do our next big project (the pantry) as a built-in. Since the side and shelf boards were already stained, once it was assembled the finishing was easy- all I had to do was stain the trim boards to match, and paint the door and the inside.
Thanks for this great plan, Ana! I’m planning to build several more of these, for my sewing room.
Perfect little playhouse my husband built for our girls. It took about a week to build by himself, but worth every minute. He did a wonderful job. Such a good daddy!
I made this for my 2 year old son who's Daddy is a Navy sailor aboard a Naval Aircraft Carrier. Our son LOVED this when I finished the project.
I've thought for a while about building a bed for our dogs, but wasn't sure where to start. We had an extra crib mattress so I set out to find a toddler bed that would work. I decided the Lydia Toddler Bed plan would work best. It doesn't look anything like it, but it was a great starting point.
First, I got rid of the canopy and the decorative side pannels. I also raised the bed 12 inches. (The hope is to add a rug on the floor underneath as sort of a "bottom bunk") The lumber store didn't have 2x2s so I used 2x3s for the legs. I also only used two 1x6s at the head and foot of the bed. They are seperated by 1" because when I got home, I realized they were actually 1x5 (RUDE).
All in all, it turned out exactly as I had hoped and the dogs love it! GOODBYE stinky dogbeds!
**Photo 1: Just finished building--the slats weren't screwed down yet.
**Photo 2: Deacon is testing out his new digs! See the stinky dogbed underneath?YUK!
**Photo 3: Dog Bed Completed! Mac & Deacon love it!
Thu, 10/16/2014 - 18:49
Thanks for sharing the great plans. We built this end in a few hours and she loves it!
We built this for our daughter's 6th birthday! Love how it turned out :D As you can see we opted to leave the plywood backing off for the time being so she can use it as a doll house and play on both sides. When she grows out of the doll house phase we will either convert it to a book shelf, donate, or sell in a yard sale ... so many options!
Made this for our patio area very fun build, my wife loves it so of course she wants another one! Back to the wood stove.
Blair K
My husband and I are horrible when it comes to folding, so I made a total of 4 of these 5 high for our closet and they are amazing!!
Erin Z
Much to our dismay our tiny town is not host to any sweet antique shops. So when I began designing our new guest room, I knew that I was going to have to BUILD two bedside tables. Thanks to Anna, that is much more of a possibility for us than I ever might have imagined.
So, I decided on one bookcase and one vanity. For the bookcase I adapted the Parson's style bookshelf plans. But instead of going the modern route, I stained it ebony and painted over with a white satin paint--and of course distressed. Simple, affordable, and quite cute. You can see many more photos at www.thereadinggirl.com.
Tue, 06/14/2011 - 04:31
I am about to start one of these, Reading Girl, and was a bit concerned that it could be too modern for our shabby chic style but no you've done it and it looks great.
Thanks for the inspiration all the way from Botswana.
In reply to awesome look by theothermrsbell
Tue, 06/14/2011 - 08:04
Well thank you so much for your kindness, all the way from Texas-USA! I wish you all the best of luck with your creation--I am sure it will turn out great!
In reply to Question by Kate (not verified)
Mon, 07/11/2011 - 13:55
Thanks, Kate! I bought this set at an antique store! I hope you can find one, or at least something similar! GOOD LUCK :o)
Been a while since I had time to actually build anything worth posting about! My wife wanted some items for her Kindergarten classroom this year, so built several items, most inspired by the Farmhouse family.
Sat, 06/29/2019 - 05:47
I love this! Can you give me the plans and list of materials for constructing it?
Sun, 06/30/2019 - 12:33
I am also a teacher and would love to build this desk for my reading class. Do you have plans?
Mon, 07/01/2019 - 18:05
I love this table for my classroom. Can you share the plans or the dimensions?
-Stephanie
Sun, 07/07/2019 - 09:46
I would love plans/dimensions for this! I was thinking I could also paint the top with wipe off board paint.
Sun, 07/07/2019 - 14:59
I would love to make one for my classroom. Can you share the plans and materials list for this table?? Thanks!!
Mon, 07/08/2019 - 19:11
I am looking to make this for my fourth grade classroom - can you provide the dimensions you used? Thank you so much.
Wed, 07/10/2019 - 11:59
Love this!
I would love this for my classroom! Can you share the plans and materials.
Thank You!
Mon, 07/22/2019 - 18:25
Anyone have any luck with figuring out the dimensions??
Thu, 07/25/2019 - 17:20
Has anyone gotten the plans for this table? I have contacted Ana White and tried other ways also. I would love for someone to share.
Thank you
Teri
Mon, 08/19/2019 - 12:09
I am guessing the corner posts are 2 x 4s, the top is 2 x 10s. It looks like the width is 6’ (looking at the floor carpet tiles being 24” square). So 2 - 2 x 10s side by side for the main part of the desk top and 2 - 2 x10s perpendicular on each side of the chair. I guess the height is subject to choice and the length of each side would also be subject to choice or to the length of the 2 x 10s to be economical.
an educated guess would be 4 - 8’ 2x10s for the top and 6 - 6’ 2 x 4s for the legs?
Anyone else have any input here? Open to suggestions.....
Comments
Ana White Admin
Thu, 01/14/2021 - 09:56
Awesome!
You did an amazing job, thank you for sharing!