Community Brag Posts

This was just the right table design for our history home built in 1880! Love the plans and easy to build!

Built the corner hutch from Ana's super easy plans!  LOVE IT!

http://www.ana-white.com/2010/12/plans/corner-cupboard

Made a cutout for my thermostat on the wall.  Gotta love building what you need for your space!

This project was super easy, my husband and I did this together while I was 9 months pregnant with our other 2 kids and dog running around the whole time! We made the table and 2 benches for $250 including lumber and finishing supplies. Check out my blog for details.

I used the Farmhouse Table plans and just extended the measurements to build an extra-long outdoor table that seats 12.

I loved building this bench!!  I was able to use only 6 2x4's which cut down the cost a little bit :)  For the stain I used Semi-Transparent Chocolate from HD and Wedgewood in a Solid Stain color from HD as well.  Building the bench itself was really easy but the X's do take some extra work.  I found that using a yard stick vs. a tape measure made the world of difference.  I also nailed the X's in vs. using the kreg jig. 

Made this one with shelf edges/trim just on the sides. Somehow my top shelf didn't span the width so had to add a little shim on each side but it all worked out! We had all the pallets and used 1x3s for the frame because some of my pallet wood was heavy hardwood. It was not without frustration because I was working with uneven/warped pallet wood but it hits the rustic look.  I am happy with how it turned out. 

My very favourite thing to build, so cheap and simple.

Using your shed plans, modified to use the 2x4s I already had on hand, I designed this 4'x8'x7' shed to match my house.  I replaced the ceder fence boards with a hardiboard, but the construction was pretty much the same.  My husband and I are so happy with this shed,which looks very similar to the $4000+ sheds we have seen, and it cost us less than $400 to make and matches our house perfectly.  Your instructions were great, and I know you saved me a lot of time and trouble.  Can't wait to load it up with our snow and gardening equipment!  Thank you!

I built this step stool for friend, and a tiny version for my own dolls house. I had expected difficulties with the angled parts, but it went together very easily. I stained both of them with a vinegar/steel wool mix, painted with homemade chalkpaint. At last I sanded them for a distressed look and coated them with brown finishing wax.

Thank You Ana-White for the amazing plans for this beautiful farmhouse queen bed! Not bad for the first try!

Shared on Facebook by Jenna Schultz 

My husband built your Rustic bathroom vanities into 3 drawer dressers to hide our children's toys on each side of the fireplace. They turned out amazing!!!

We needed beds for 3 children, one of which is 14 months old, in a small bedroom and with the simple bunk bed plan to start with I came up with this. The kids love it, although it took the 14 month old a few tries before she accepted the change from her regular crib in another room to this crib/bed and sharing a room with her siblings. Now it's all good!

The beds can also be used separately. The top bunk and the middle bunk will stand 30 inches off the floor when used as separate beds, so like loft beds with storage space underneath for a dresser, reading nook, toys, etc. All side safety rails can be removed for unstacked beds as I finished them all separate from the beds. The bottom "crib" bed side rails can also be removed for single bed. At this point it would just sit on the floor as a single bed also but I may come up with some sort of feet to get it up off the floor when the time comes. They really wanted this set of bunks to be able to be used separately also. The fold-down portion of the "crib" side rail was designed to give easier access for changing sheets, etc. for the "crib". This "crib" bed also uses a regular twin mattress.

This is my second woodworking project (first was a toy chest with a LOT of help from my Dad). I made the wooden frame at my parent's house with the use of my Dad's power tools and brought it home to finish and cover. I used Ana's Upholstered Bench plan but modified the dimensions to what I wanted.