Community Brag Posts

I made these for my Mother's Day present to myself. I painted them the color of Carrots and Lettuce. Working on the third one titled "tomatoes today." Easy to build, fun and quick....

Queen sized storage bed in width for  a full sized mattress. I wanted this against the wall, so i put both sets of drawers on one side and hinged the footboard for access underneath. 

I really enjoyed building this toy box! I used rockler torsion hinges on this and loved how smooth they moved and the install. Thank you for the inspirational plans!!

Check out the details about how we build the bed on my blog: http://www.brightgreendoor.com/2013/05/diy-ana-white-jr-loft-bed.html

Although nothing about it was difficult, it was time consuming, and consumed the greater part of two weekends.

We followed the plans on Ana White’s blog pretty close, other than narrowing up the stairs by a few inches due to a furnace vent that would have been in the way.

We bought all of our boards at Menards which came in just under $100 including the large piece of plywood. I spent chunks of time throughout the week getting all of the boards sanded. Then we spent a Saturday getting all the boards cut to the proper size. Then it was a week full of giving all the wood 2 coats of Bulls Eye primer and a top coat of high gloss cabinet paint.

I also installed the Ikea Kvartal track system around the inside of the bottom bunk. I used leveler clips from Ace to hang Ikea curtains that I altered.

My boys were SO excited the whole time we were building it and love it. My little one calls the whole bed his “top bunk”, even though he sleeps on the bottom. They also have dubbed the area under the platform the “hideout” and think they are invisible when they are hiding in there.

4x4 Truss beam dinner table with matching benches.  Benches are modified to fit under table to save on space when not needed.  This table is large and in charge and demanded a large space to fit in.  Luckily my friend had plently of space in his home to fit this table! 

My boyfriend and I wanted a calm relaxing beach feel at our Florida vacation home, however with kids in college and two getting married, we were on a tight budget.  We found these plans on Ana White's website.  He made the headboard and bench and I distressed it to make it look weathered.  We used Minwax Dark Walnut as a base,  let it dry over night,  and lightly wiped it down in the morning.  We then used Rustoleum "Chalked" in White Linen and applied it with a large stencil brush we found at Michaels craftstore.  We applied it almost haphazardly,  purposely making it look rough.  The chalk paint dries quickly.  We then brushed on some clear Americana creme wax.  We are very happy with the end result,  it was our first project build, and we nailed it.  Thanks. Ana!!!

This was my first furniture building project. I made quite a few mistakes along the way, but I'm happy with how well it turned out. This project took me ages; I'm amazed that people can pull it off in a weekend! I made the table slightly lower and narrower than Ana's plan. It comfortably seats 6 people. I'm so grateful to Ana for her plans, and I also found the instructions at the tommy & ellie site very helpful.

My best friend and I built these Easter weekend with very little husband intervention. I then painted and finished them and installed them with my husbands help. The main modification we made was to figure out the angle to cut the posts in order to adjust for the slope of my laundry room, which is a converted porch on a 1912 craftsman. It was not easy, but we jumped for joy when we tested it out and it was level! We decided to use plywood scraps on the side and back for more support and to keep laundry from falling behind the washer. I had the chair raiI trim from another project, so I used that along with a healthy dose of wood filler. I absolutely LOVE how it turned out...now I just need to find cuter baskets. 

Amazingly easy to build!❤️❤️❤️ My new chairs. The table is made from the Ana White planter. We just used left over 2x6's and 2x4's to create a removable top. It makes a great table with Kentucky of storage.

This bed is made exactly the same as the plans. Pretty easy. Very sturdy, I did use the kreg jig to assemble, even to attach the sides to the headboard and footboard. I'm not able to use the box spring anymore, since it makes it too high.

I added a cabinet door and put some extra trim on to fancy it up a bit. I also used my router and an ogee bit on the top. The top and plywood sides are aspen and the rest is poplar. They were finished using General Finishes Georgian Cherry gel stain.

Inspired by Finn's Dad's table, we decided to copy it since we wanted to build a table that would seat 8 comfortably. The most difficult part of this project was finding clear cedar for the top. It had to be ordered through our local lumber yard and we were not able to match boards. We built the frame out of treated pine and the 4 x 4 legs from average greade cedar found at Lowe's. We finished it with four coats of polyurethane. 

This was a birthday gift for a 1 year old. Yes it's painted like the tractor.