This project was so EASY and it is just what I wanted over the entertainment area. We had some So excited that it came out so well and looks great! Thank you for such easy to follow instructions!

We're in a rental and the rooms are a good size, but on the small side of good sized. Thought this would be perfect to give my 4 year old a little extra play space. I added three extra 2x2s to the guardrail, it was a bit short for my liking. Other than that, stuck to the plans. It seemed when putting together the ladder that we were missing a piece and couldn't figure where it was in the plans, but I just ran to the store so we could keep the ball rolling. We love it!

I built this for my daughter, and she loves it!  Looks great and feels even better to relax in.  Now I'll have to build one for me, 'cause she's not sharing 

It took me a good 6 months to finish this since I started before summer, but it got too hot here in SC very fast. So I just finished it in January this year. It turned out great! Longest part was the finish work since many days it was too cold to put Poly on it. The actual building of the table went quick.

My husband's a music teacher and I had to build him this for our fifth wedding anniversary! I was looking and thinking about what to get him for a long time...then, I looked up what the "traditional" gift is for the 5 year mark. Wahoo, wood! Since I started dabbling into making things after discovering Ana's site last Fall, I thought, well no problem! Ha! Well, I had 2 evenings to build this thing with 2 toddlers helping me :-). I used the base of the stand from the plan for the Coat Tree. Then, I designed the top using the letters "R" & "R" for RoRo (what I call my Hubby). The top was cut using a jigsaw. Everything else, either a mitre or circular saw. The hardest part was affixing the top to the stand. Argh! Angles, drilling, messing up, argh! Somehow, it's put together and holding up, lol! Might I mention that when I first started building things, my hubby's first request was for a music stand. Well, there you go RoRo! Happy Anniversary!

This was basically my first ever wood working project. It didn't turn out perfect but I had fun doing it and my daughter likes it too! It isn't done yet, still need to figure out the color of paint I'm going to use.

Took about a week working an hour or 2 a day, but for my first woodworking project I think it turned out pretty well!

I've wanted to make this dress up storage since the moment I saw it; I planned to do this as my first building project. I finally got around to getting all the supplies and then I asked my father to assist me since i never really built anything like this before - well, he's not a patient man and he ended up building the whole thing without me (boo!) ... but I at least got to paint it! I absolutely love it and it looks fantastic in my girls' playroom.

I used Ana's garden bench plan and had a blast finishing this project. The plans are well thought out and finished very square and sturdy. I altered the depth of the bench to 18 inch seat supports as I am short and felt the 24" span would leave me feeling like Edith Ann. (This also required shortening of the armrests to 24") I also was inspired by an abandoned headboard that had nice detail and some Oak spindles. My son, bless his heart, carried it on his back about 6 blocks so I could make this. (He knows how to stay on my good side.)
I spent more time painting the project than cutting out the boards. I prepainted all the pieces before assembly. I wanted it to withstand the Wisconsin weather so I diligently primed it and then did two coats of outdoor latex paint. I elected to tint the primer as I was not sure how much paint I might need. One quart of Zinsser 123 primer and one quart of Dutchboy Maxbond semi gloss paint in plum mauve was enough. The dark paint is Rustoleum spray paint in purple. If I thought it was cost effective I might have spray painted the whole thing but it was summer and I didn't want to deal with the fumes. Of course, I picked the hottest two weeks so far this year to do this project. My sewing room became my painting station.
The width is close to 62", seat height 20" and seat total depth is 22". I trimmed about 3" off the leg post of the headboard.
I am eager to pick another project from Ana's plans.
My cost is higher as I had no scraps to work from and needed all the screws and paint. I also bought $90 in cordless tools and some collapsible sawhorses. All of these items I will use again for other projects.

I built this for my little girl's room and she loves it! She loves the play area underneath especially. The build did not take that long, but the finishing (sanding and painting) took many hours. It is very sturdy. My girls sleep up there together all the time, and we have even had adults sleep up there. We didn't have a corner to put it in, so I built wider steps along the same wall as the bed. 

Built by Keith Hunt

I built this chair for my sister. I added small 2X2 support for the front legs and the arm rests because the pocket holes split. It was a little tough building this one since I had to rely on the HD staff's cuts, which are not always exact. But I'm happy with how it turned out, and my sister loves it too!

I was honored this past March to be Matron of Honor in one of my best friend’s wedding, and as a gift to the happy couple I made them a guest book bench. I wanted this one to look extra special. I started out with Ana White’s Fancy X Bench plans and made a couple of modifications. I reduced the overall length to 54″ to sit at the foot of a bed or under a table, and used only 2 pedestals instead of 3. To make the top better for signing, I decided to substitute the planked 2×6′s for a pine 3/4" thick “hobby board” that was 15″ wide, purchased at Lowes. I framed it out with some 1×2′s to make it look chunkier. Once it was built I gave it three coats of white semi-gloss latex, and then drew up the art for the center. It’s the same font used on the wedding invitations. I wish I had thought to take a photo of the signed bench at the wedding! But I was a little bit busier at the moment. I’m really proud of this pretty little bench. As I received in one of the messages on my own wedding bench, I hope it sees the butts of many friends for years to come!

I made this dresser to replace two cheesy dressers my wife and I had when we first moved out on our own.  The style was taken from the Madison dresser design.  I added two more drawers as we were condensing two dressers to one and  I wanted to ensure I was able to use it!!

Rustic X End Table

King Size Farmhouse Bed

I absolutely love this table and couldn't believe how easy it was to build. It was a weekend project and gets so many compliments.

For the finish, I mixed steel wool with vinegar and brushed it on. The table really darkened up nicely and made the distress marks in the wood come out. I then applied walnut stain and followed up with 3 coats of poly.

In my post I have pictures of the finishing process and a video showing how to distress wood and apply the vinegar solution.

If you are looking for an affordable table that looks great, I'd highly recommend building Ana's table.