Community Brag Posts

This took a little longer than a weekend and it helps to have some help because it is so big. I would cut the legs about an inch shorter if you have 9 foot ceilings, other wise it will scratch your ceiling when you tilt it up. I put the door on because I was worried about my 3 year old falling out. She loves it and it was fun to build.

It was taken from a plan that Ana had for a patio bench. I made it longer and high enough to match the seats on the couch 

This was my first project..took me a week but I loved creating this!! Got plans for more! Love your website

Used the plans for the 2x4 couch added an additional 2x4 across the back for a little more back support. Then made two chairs by modifying the couch plans to fit the cushion width 

Wanted a side table to go in dining room for drinks and spare dishes to go on when we have get togethers. It was a pretty simple that was fun and got it done in a weekend during naptimes and the spare moment here and there thanks to my husband having time off. I didn’t want a second shelf because that’s just a ladder for my toddlers! I decided to go with a truss look since it fit my furtinure a bit more and I like it having a bit of a decorative look in the back.

Having done a few doll beds I decided to tackle a toddler bed. I ended up donating this pair to an auction benefiting Montrose Street Reach and Little Footprints Children's Ministry. If you are interested check out http://www.littlefootprintscm.com

I combined the loft bed and the storage daybed to make this bunk bed. I also modified the plans slightly so that the posts extended to the ceiling and added stairs instead of a ladder.

Added rolling casters to the plan. Also decided to go with one big drawer instead of two small ones. The top is made from pine 1x2's that I glued togeter and then sanded dow. Do yourself a favor and go through the plans and sketch out your own plan and wood requirements ahead of time. There are a few mistakes in the plan when it comes to your buy list.

I made this easy and cheap Christmas tree wall shelf to add character to my guest bathroom.  I went through all my wood stash and found enough wood to build this project with! 

Make sure to pay attention to the long and short point directions in Ana's plans.  Since I was hanging this above my toilet, I didn't need the hooks so I just omitted the bottom piece all together.

I ended up using wood glue and a nail gun to put everything together so it went really quickly. 

I painted the whole tree with green chalk paint and distressed the edges with sandpaper.  Hung it up with L brackets in a stud.

Fun and easy project!  Thank you Ana!!

I saw this and fell in love! I've made three so far!

Thanks for the shed plans, I've been looking all over for something like this. I used 3/8" ply wood for the back wall to save money but spent what was saved and more on the shingles and stain/seal. I made the shed exactly 6' wide and 4' deep to fit the 6 2'x2's patio slabs.
The entire project took about 2 weeks to complete and cost about $700. We pay more in Canada but at least I finally got the shed I wanted.

We always wanted a real barn beam in the house, we bought an old ash beam that we used to create a modern mantel.   After some research, I decided to save some money and mount it on a 2 x 4.  I've provided some instructions on my blog.

http://www.woodworkingfourdummies.com/blog/barn-beam-mantel-diy

Cheers,

Ian

This was built as a nightstand/charging cabinet.  I made it a little deeper for more stability. I also replace the 4-5 drilled holes with a corded electrical/usb outlet that allows you to both plug electri cords and usb cords for electronics (about $10 online). I added a center 1 X 2 and magnet closers on the doors. I used unfinished wainscot for the center of the doors.

The bed on the left is the one that I made. I used as much reclaimed wood as possible for this project. I had a bookcase that wasn't stable that had a lot of 1 x 4s so I took it apart and used them. In the second picture, I made the elephant wall art with some 1 x 2s and stapled the fabric to it. It hangs on the opposite wall. It was a fun project. (did not make the bench) I have a lot of interruptions when I build, so I am not sure about the length of time.

My first Ana white project!
It was easy and I really tried to take my time to make it look nice. Great new BIG table for my sewing room! LOVE IT!!

Stained the top 2x12's black and the legs are oops paint that are a teal color.