Simple Modern Bar Table Desk
![](/sites/default/files/3154813952_1345423592.jpg)
Check out the bar stool also. I thought the inset being stained added a little touch. I use this as my desk. I get compliments all the time!
![](/sites/default/files/3154813953_1345423592.jpg)
Check out the bar stool also. I thought the inset being stained added a little touch. I use this as my desk. I get compliments all the time!
Finished building this table with the plan provided by Ana White! Worked out great. I stained it in a with a transparent deck stain in natural sequoia. Happy to help if anyone has any questions!
Tips: Definitely cut as you go. If you get the angles are off in the center when all the long pieces connect is it makes each top piece larger or smaller.
One thing led to another, and we got a rescue dog – Arthur. The good little guy finds the apartment too big to stay alone when we are not around, and it is a recommended practice to have a dog crate so that the dog has a confined space of its own. The options to buy were hopeless, and the cheapest ones were just made of metal wire. They look horrible inside the house and it looks like a prison cell. There are nicer wooden ones, but they cost few hundreds of dollars. So, I put my DIY hat on, and thought of building one for our new buddy!
Material Used:
Refer my blog post for all step by step instructions and optimal material usage.
I made this gorgeous bench about two months ago as a gift for my mom on Mother's Day. She loves it and It's currently sitting out by her pool. We love how solid and deep this feels. This was my first project where I was using miter cuts, and it took a bit to get used to. I wish I had a brad nailer to help secure the X pieces on the back board. I used pocket screws and plugs, but it was a bit of a struggle trying to maneuver the drill. I ended up having to use a screw driver to make it fit.
This potting bench is my first project, and I am so happy with the way it turned out. I was a little nervous to paint it purple, but I think it looks pretty good. I originally planned to deviate from Ana's plans, but decided not to go overboard for my first project. The plans were straight forward and easy to follow, it only took me a couple of hours to build. Looking back though, I would have gone with a different wood (I used cedar), because I used conditioners and sealers and primers etc... and the cedar grain doesn't come through over the paint, and isn't really worth the extra cost for what I did with it. Overall a great beginner project. I am looking forward to many more.
I was inspired by this workbench post to create a workbench, especially since I needed one! I painted it with exterior paint and added wheels. I also added extra wood around the bottom to make it sturdier.
This was my first attempt at the leaning bookshelf project. I decided upon a modern-contemporary look by using white laminated 1x4s and opted for dark wood staining to give the shelves contrast. It was my first time using a compound miter saw, as well as intensive wood sanding and staining. I struggled with cutting the white support beams into the directed 5 degrees, and just made my best guess with a hand saw (however, I will try to improve upon this for our next set, since the additional cost of a second bookshelf is only about $50.)
I also learned about the trick of a 5-point shelf leveling (one for each corner, and the center point) in order to get a truly level shelf. Creating the jig in order to space out the distance between each shelf is a really good idea to help implement all of the setup.
Overall, I really enjoyed this project and wanted to thank Ana for her inspiration and plan details.
I look forward to reporting yet another success on our second bookshelf (and following writing desk) soon!
I wanted a bar stool for my kitchen counter and this plan was perfect for what I wanted. I painted it turquoise to match a bookcase I had in the connecting living room. Since I already had the paint and wax all I had to pay for was the wood.
I'm so grateful for these plans! Since we were building in a basement against a concrete wall, we just made each side with the vertical 2x4 supports, then anchored the shelves to the exposed studs on the side walls for safety. This project was so fast and easy -- I put them together one night after the kids went to bed. They're 8' long and 2' deep, very sturdy, and they were highly economical to build. I love that the shelf is smooth and flat, too, as this makes it easy to store small things as well as large totes.
I just started wood working this past few months, and this is I think my 6th project already. Super easy to make and so sturdy!! This will definitely help make building easier!!
Mon, 06/29/2020 - 12:44
I also made one of these last week and it has already proved it's worth many times! Yours looks great - I hope you get lots of use out of it :)
We found your great plans and site online. My son, Michael made 6 Garden Benches for his Eagle Scout Service Project and donated them to the local Master Gardener’s Association.
They turned out beautiful!
Thank you for sharing your plans. We’re looking forward to building more of your projects!
The Taylors
I based this project on the Outdoor Shoe Bench. We used some leftover wood from a large building project, so we had to make some changes depending on wood dimensions available, but it worked. We also did a few things a little differently, such as the overall dimensions and how we did the lot. I very much appreciated the help and inspiration I got from this website!
We needed some extra kitchen storage with a baby on the way and this project did the trick! We needed something skinny since space is a premium in our kitchen. I am happy with how this turned out. I made the shelves adjustable using the Kreg shelf pin jig, which worked amazingly.
Thank you for sharing the plans for this. I really liked how out breaks down into 8 pieces to move. I felt the plans were lacking a bit of detail, I ended up downloading the sketch up app for $10. That app helped a ton! Due to lack of detail and not thinking ahead I ended up putting a couple bolt holes in bad spots and had to wood fill and move them. I also didn't understand what mirror image of left and right side were. Lol. I laid down the left side and carefully assembled, then I made the right side to look exactly like it. Lifted the left side, looks beautiful, lifted the right side and looks like a million screws. Lol. I also had to add additional wood to make it work since I essentially built the side inside out. I think I put the slats in a little closer then the plans suggested, I ended up cutting a few more if you notice the gap in bottom bunk slats. I also purchased "backpack strap" from ace hardware and laid it across the slats. I screwed the end slats and stapled the middle ones to the strap. All in all, a great project and it will last for years. Thanks for sharing. Built from http://www.ana-white.com/2013/06/plans/triple-bunk-staggered-beds
Full storage bed made from farmhouse storage plans.
Great easy project to get the bigger chicks out of the garage to integrate with the older hens. Made some modifications because we have a lot of critters trying to kill the chickens/chicks.
This was my first wood working project in a very long time. I was a little nervous about doing it because it would be on display in the main entry way of our house and I didnt want to make any mistakes. It took a little longer than I had hoped, but I think going slower helped make it perfect.
Sat, 09/01/2012 - 14:31
Great job! Been wanting to make one myself. Love the color and stain.
I wanted a set of pool deck furniture and your plans were exactly what I was looking for! I made two chaise lounges and two chairs. I bought the cushions from Big Lots at a great price. The longest part of the building process was sanding each board. I modified the plans by adding wheels, using a 1 × 2 instead of a dowel for the reclining bar, and changing the legs slightly. It was so helpful to have a buying and cutting list!
So why did I decide to build my own bed?
1. Cal King Frames are hard to come by in Canada and if purchased from a store, they cost an arm and a leg. Also I wanted a new mattress made of solid latex - very spendy - so our budget was already maxed out from that.
2. You come across a Kijiji (canada's craiglist) listing for 200sq ft of 3/4" solid oak flooring
3. You know Ana's plans will help tremondously and it gives you the boost to finally decide - yes I can build my own furniture.
So the upcycling made this all doable! Some random Kijijier thought to pass along the left overs from a flooring install (the other option was burning it he said) I said thank you very much and took all that wood home. Now he had bought raw rustic grade oak. Only $1.89 a sq/ft to buy FYI)
So it was not perfect, with many pits, wormholes, cracking and complete holes. But the raw oak was great for a number of things - the distressing was real - no extra effort required, also the raw oak was easily stained with my homemade iron acetate stain (steel wool and vinegar) and I was able to bevel the edges without ruining an existing finish.
Thankfully I only needed a few long boards for the framing and was able to use the better short boards for building out the foot and headboards. I improvised the posts on the end with a clever mitered 4 board combination. Cutting just the tongue and the inside edge of the floorboard created a inset detail on the post that is very forgiving to my crappy cuts and ended up doing the trick. I also saved my sawdust from cutting to mix with glue and fill the major holes and pits in the wood. This took the stain very nicely and didn't add any extra cost to the project. Anyways if anyone wants more suggestions on making use of cut off material just message or comment below.
By the way the plan is awesome and I much appreciated it during the process. I did complicate things by making the drawers 24" deep vs 16" and having to upcycle a product rather than just buying material.
To make use of the depth with a cal-king I decided to go with 24" deep drawers - fyi this means more material, more dollars,and more weight! Huge amounts of weight, once since I decided to go with 3/4" Birch ply for the build. I lift for fun and fitness so I managed, but beforewarned - the plywood frames are awkward and heavy.
I ended up needing 4 sheets of 3/4" Birch ply b/c of the upgraded sizing. Even at 50% off (lucky me) this still was $160 in plywood + $50 for Luann for drawer bottoms and closing the back of the frame behind the drawers. I also used full extension drawer slides so that I can actually access all that storage so set me back another $180. I got the lights from Lowes for $60 for the pair.
Total cost $500 + free oak floor cast off + time = a priceless project