Queen Sized Stoarge Bed - cheaper version
I made the bulk of this bed from 2 sheets of OSB to make it cheaper. The headboard is from salvaged pallets and scrap studs from a construction site. Baskets or drawers forthcoming. Easy plans to follow.
I made the bulk of this bed from 2 sheets of OSB to make it cheaper. The headboard is from salvaged pallets and scrap studs from a construction site. Baskets or drawers forthcoming. Easy plans to follow.
My niece's 4 year birthday was coming up, so I decided I would make something for her. I looked through my wood scraps and tried to come up with a project that would be quick to make and would make a 4 year old happy. I saw Land of Nod's Tabletop Theater and I knew it would be perfect! My measurements are not exactly the same as the Land of Nod version because I was using the scrap wood that I had on hand, but it worked out great! Not including painting time, this can be built in just a couple hours. You can find the step by step tutorial on my blog.
I built this square farmhouse table for a friend of mine. Used the same build as the 4x4 truss table. Just made it square. 64.75x64.75
My take on the Rustic X Console.
I loved this plan from the minute I saw the post. We got the kids and their friends involved in this build. I love having a outdoor table that is large enough to have everyone around.
Super fun and pretty easy to make!
We LOVE our finished bed. We started out to make the Farmhouse Queen Bed but decided after completing the headboard and footboard that we wanted some storage with it. We made the frame from the Farmhouse Storage Bed plans without the actual drawers. We wanted a more open look to the storage. We are pleased with the way it turned out and love that Ana shares these wonderful plans online. Thanks again Ana!
My daughter and I built this out of the old framing that was pulled out of the house (fir) and some leftover wood from a friend's house build a few years back. If the cushions are lifted up you will see the old electrical wire holes! I shortened the set by one seat so it would fit the patio space. The cushions are from Ikea and fit perfectly. I also modified the coffee table so it was the similar proportion to the full sized set. Thanks for the very approachable plans Ana! Excuse the water all over the area in the pics. We have water dogs and they seem to like the sectional too!
Just bought a vacation home and need to furnish the place. Started with the size Farmhouse bed with side tables. Used Behr paint from Home Depot called Cotton Whisper sanded edges and used a dark walnut stain to antique. Finished it off with 2 heavy coats of poly.
Tue, 11/08/2016 - 10:57
Did you use a metal bed frame or did you make the side rails and frame? i am curious how high my mattress will sit above the footboard because I want to make the side rails and use slats. I have a boxspring that I will be using. I dont want my mattress to tower over my footboard. did you adjust the length of the 4x4s on your footboard?
I loved this bed and started building it last summer. Most of my lumber was inexpensive (meaning somewhat warped with dings, knots, cracking, etc). Since I wanted a very clean and smooth look, I took a lot of time filling, sanding, filling, sanding, over and over in order to get it just right. I also like the paneling look on other beds I have seen, so I added 1x over each of the panel board seams.
For the frame, I built using 2x4 and then ran MDF strips across. With all of this wood, it is a very heavy and very sturdy (if we ever move, my wife says we are leaving it at the house).
Very easy. Thank you!!
My two daughters really enjoyed helping daddy make these birdhouses but most of the loved painting them.
This was my biggest project to date. The hardest part was finishing it.
Mon, 03/23/2015 - 03:01
I liked this desk. how much would it cost for doing this? I am a writer at one of the and btw way work full time infront of my PC, wish to have a separate work room with well interior designed.
I made this double x bench from plans from www.hertoolbelt.com
This is seriously easy to make.
It looks complicated but it really isn't.
I used the vaseline technique for distressing.
This bench looks amazing at the end of my farmhouse bed.
Made a few adjustments - rounded the armrest. Absolutely delighted with it.
This is a rabbit hutch I created for my kids 5 rabbits. The thing that makes this hutch really nice is if you have a large lawn you can just move the hutch a little bit every day and the lawn gets mowed, fertilized and you don't have to worry about cleaning up all the rabbit droppings. I also mounted a rabbit feeder on the inside of the house door to keep the food dry, which has worked really well.
Here is a short blog of all the steps in its construction:
http://design.medeek.com/gallery/RH3080_COPALIS_2013/RH3080_COPALIS_201…
Sun, 05/05/2013 - 01:52
I apologize I haven't got the completed planset up for this project yet but I will try to get it up in the next couple of weeks as well as a very complete materials list. You will need to go to a farm/feed store to get the correct 1"x2" wire and 1/2"x1" wire for the floor. Do not go to Home Depot and use the cow wire they have or the hardware cloth for the floor, neither of which are the correct choice. Home Depot has the lumber but not the wire. If you have any questions or even improvements to my design I would be interested in hearing from you.
Sun, 09/13/2015 - 19:18
Finally got around to uploading the plans. I still need to create a material list for this plan but the basics are there now. We've had rabbits in it for about a year but recently we've tried some guinea pigs and it works great for that as well. The guinea pigs can pretty much live off just the grass and dandelions but you do need to move it daily to give them plenty to eat.
We had issues in Baby Goats' closet, which prompted a big closet re-do! Chose to use the plans for the Closet tower, and I LOVE it! You can read more about it here.
Fun project, ordered the hardware for the rail system itself and the wheels were too big so I made my own rail system.
Mon, 02/07/2022 - 10:10
Beautiful build. Looking forward to building one of my own.
Inspired by the designs from Ana White and Whitney from Shanty2Chic and so thankful for the clear instructions, I built this 4x4 Truss Beam dining table using locally sourced clear Douglas Fir. We are so pleased with the results!
https://www.ana-white.com/woodworking-projects/4x4-truss-beam-table
This was a simple coat rack I decided to make with some random scraps of wood I had from previous projects. The only out of pocket costs for me was the hooks!
***update****
I decided to make a kid friendly version as my kids were creating quit the pile of courts and backpacks when they got home from school, mostly because they couldn't reach the adult one! With some left overs, problem solved!!
Tue, 05/07/2013 - 08:16
Exactly what I was looking to make without getting a router involved! What kind of moulding is that?