Community Brag Posts

Hello everyone and thank you Ana-White for all of your plans.  I love this site and have built several pieces of furniture for our home from them. 

This bed is absolutely Rock Solid! In reading the blog I noticed several people asking for the "modified" dimensions or resizing for a standard king ( I put them in the blog but this is what I did)

Headboard: 9 1x8's at 30 inches long and 2 1'x6's at 30 inches long (I omitted the 1x3 end pieces at 30 inches and that way I had 76 inches wide.

The plans call for the 1x4 panel trip pieces (for headboard and foot board) to be 80''.  I resized them to 76''

The headboard 4x4 legs were still 54''

The bottom headers 2x4's for both the headboard and footboard calls for 87''...I changed it to 83''.

The top header 2x6's  for both the headboard and footboard call for 89''...I changed those to 85''.

The plan calls for the footboard to have 10 1x8 panel pieces at 15 inches. like the headboard I changed these to 9 1x8's at 15'' and 2 1x6's at 15''.

We have a new 12'' memory foam mattress so I did like others and used 2x4's for cross beams secured with truss hangers and then used peg board for additional support.  The side rails are 2x12's at 62' ( I wanted a little extra room to be able to bolt them to the head and foot board.)

NOTE: The cut list calls for 4 1x8's  You Need 5.  And to do the plans my way you need a few 1x6's.

Sorry if this is wordy but I hope it helps!

Thanks Ana for all of your awesome plans!  My Fiance' loves the furniture and I am addicted to building because of you!

Dave

Needed a storage spot in the living room to hide the wii remotes/games and the iRobot mop, while allowing easy access and charging capabilities. This piece fit the bill and looks beautiful!  

We cut a hole in the back, in front of an outlet, and placed a power/USB strip inside the cabinet. 

Used routed plywood scraps for the false drawer fronts and they look so real that everyone tries to pull open a drawer rather than swing open a door :)

NOTE:  The cut list in the plans say to cut the 1x3s for the decorative top @ 35.5". They should be 37" each, which we realized after cutting and went to put the cabinet together :(

I was sitting down looking through the pottery barn catalog one day and saw the Eli fort bed. My sons name is Eli so I found it funny it had his name but also decided he had to have one! I of course was not going to pay the pretty penny of $1400 that pottery barn wanted so I knew if he was going to have it , I would need to build it. He is 2 years old btw. I decided to google Eli fort bed to see if I could get any other measurements. Then I saw Ana Whites website for the first time. I was in my glory and super excited when I saw the clubhouse plans. Though I changed alot of things, her plans gave me a great layout to give me the confidence I needed to go and do it! So here is my building before and after pictures. Just thought Id share and of course the last picture is my son super excited about his new fort bed!

Some of my changes:

I added 7 inches to the posts height to give more space underneath it and to give me space to lower the mattress .Then I changed the angle of the peek as well to make it shorter to make up for the height difference as well.

I used plywood that looked like panels for the walls instead of pine planks. Im not sure if the cost is cheaper or more but I wanted wood above the door instead of just a piece of trim like in the Clubhouse plans and this I believe was much faster then cutting planks and putting them all together.

I dropped the mattress height down 6 inches because I wanted the railing to be taller after the mattress was in the bed for extra safty since he is only 2. It is easier for him to climb up into the bed with the mattress being lower in the doorway as well. I hid the fact that is was much lower behind the 2x8 trim in lou of the 1x6 trim the plans called for.

I also added the top step to the ladder as well because 3 wasn't going to get him up there. :)

Thanks Ana White for the plans!! They helped to give me a starting point so that I knew which bases to cover when I altered something!

I had a horrible time finding an outdoor sectional that fit in my sunroom and didn't cost a fortune, so I adapted the Storage Sofa plan to work for my needs!

It took a couple of weekends, but I didn't work straight through both days - I would do one task at a time; cut all pieces, assemble boxes, stain, put together cushions, install in sunroom.

I used my kreg jig for as much as I could, and adapted from the original plan to leave the backrest open to give it a more outdoor look.  

This was my first project ever. I had a lot of fun and it didn't quite turn out right but next time it will be perfect.

thanks for the plans! Took me about three hours to build, sand and stain!

This was the first piece of furniture  my husband  built. He also built a matching sideboard/buffet table.

I live in a small mobile home, so I didn't make the dresser as wide. I also used a little combo of the 2x4 look from the Rustic X Console (which I already made a modified version of) I liked the 2x4 look and I wanted the dresser a little sturdier because I was making it a little taller without a bottom shelf. It's 44" wide and 40" tall. I wanted a space where my dog could have her bed out of the way (you can already see her in her spot :) ) Because I didn't make it as wide I also thought 3 drawers to the top would be too busy, so I put two to the top and one large bottom drawer. It is already given me more room for clothes.

I have to estimate on skill level and time, because I do it here and there, but I probably finsihed this with in a week. I haven't been real good at keeping track of costs because I have bought wood here and there, but this may have been around a $100 more or less?

This was also my first project with drawers. The first was a toughie...but the other two went right in (???).

But I am proud of it and love it! Without Ana and her website I wouldn't have been able to do it....

I also have 4 other dogs who started out as fosters....so more space saving projects on my list....tons to do! So, please don't look at any mess, still lots of work in progress :)

Super easy. Under $50 .. wanted an industrial look to match new shelves, and could storage laundry baskets. Wanted a certain width / color. Added extra pieces to bottom shelves to create a cubble shelve.

Love the outcome!

Here is my try at your table. I skipped the x's on the sides. 

We used Ana’s plans in the Grade 12 Custom Woodworking class this semester at St. Theresa of Lisieux CHS in Richmond Hill, Ontario, Canada. Surprisingly the all boys class really enjoyed the project and there effort shows in the final products. We built them to order and sold them at cost to the other teachers to replenish the ever shrinking lumber budget.

For the first few bookcases we used wood screws,dowel plugs, and biscuit joints, but quickly smartened up and purchased a Kreg Master System. If you were on the fence about getting this system, then take our advice and go out and buy one. We now have a second system on order.

We added customizations with mitered trim pieces, custom colours, wallpapering (see pink shelf), and choice of a backer board or choosing to leave it open with trim all around. The project is such a hit, we now have 6 more shelves on-order for next semester.

Thanks for a great website.

Greetings from Brazil. Thank you very much for the dollhouse bookcase plans. I did it to my goddaughter and she love it!

Made a couple of Tryde side tables for our living room along with a Tryde coffee table and kids country bench.

Great Project! a ton of fun!

Thank you for the inspiration! My daughter and I made a similar. We did a how to video here.

https://youtu.be/Hl25l7kfkHU