Community Brag Posts

I built this changing table with a friend who wanted an easy introduction into building. I already had the MDF for the shelves gifted from a friend looking to get rid of a large pile of sheets, so that really helped cut down on cost. I spent $15 on the furring strips and screws for the rest of the piece. I already had the sanding and finishing supplies as well as paint. I added two strands of white cording from Hobby Lobby ($1 per roll on half off days) to hide the gap created between my trim and the top changing piece. I also modified it to fit a 16" wide changing pad.

I would totally recommend using Mod Podge as a sealer on work-horse pieces of furniture. One, it's completely fume-free and non-toxic (which was perfect, since I'm about five months pregnant and need to avoid VOC's) and it's got a really thick, clear glossy finish that's super easy to clean. You only need one coat of it, as well. Just be advised that it's a lot easier to see brush strokes, so I wouldn't use it on your fancy stuff. But for changing dirty diapers, or on a kids table? It's perfect!

I wanted to convert my craft shed to my office after I accepted a new job and would be working from home full time. My shed is only 10x8, so I needed something smallish and functional. I modified the plans slightly and I did make a few mistakes. In the end, I think it turned out great for a 50 something grandma who likes to work with her hands!

This was my husband and my first try at building furniture.  It took most of the weekend to build, paint, sand etc, but it looks great in my son's room and has much more room then his old bookcase.

Made this simple house bed for my daughter. Got the idea from Ana white page and made my own.

We used ana's plan but modified the top

Bed Frame and Headboard made from Ana's plans. Frame is very simple. Headboard is fairly simple but a lot more cuts, measuring and attaching. I stained both with Varathane Weathered Gray. I also attached sideboards and internal support 2x4s with bed-frame brackets rather than screwing directly in to allow for easier deconstruction and reconstruction. Used an insert nut on the sideboards to attach hairpin legs (screwed directly into top/bottom boards).

Side tables are just 3/4 birch plywood glued and nailed into a rectangular box. 24x18" Top/Bottom and 18 x 6" sides. Hairpin legs are longer versions (16") of Ana's Amazon suggestions for bed frame. Stained with Varathane Antique White.. turned out ok, but would use a different white stain or just paint them white if I had to do it again, and paint the insides before you build!

After my free drink station project I was going to swear off pallet wood for larger pieces, then I came across what may be a holy grail of pallets. 4 feet by 5 feet made with 4X4's and 2X6's held together with screws rather than nails. Yup, something had to be done with this.

so the sort of free comes from the lumber being free while I paid for the stain and poly. Of course, you could say we always pay for those, in this instance though they weren't leftovers from another project.

I say sort of Tryde because it shares the basics of the table, 2 by top pieces, breadboards, chunky 4X4 legs. However, given my wood choices the lumber sizes are all mixed around. Also because I was originally going to make the modern X leg kids picnic table but didn't have any good wood for the legs.

So instead of the breadboards being the wide pieces those are now 2X3's with 2X6's for the table top pieces. Another difference is that instead of 1X4's for the aprons boxed out I used 2X4's. This really wasn't a big deal because I had a Kreg Jig. By the way, got the master system and it rocks my socks off.

Compared to my last pallet wood projects these boards pretty much look store bought, I wish I had remembered to take a picture before I stained it. They're definitely a bit knotty but that's OK because even when I don't want an overly distressed look I still don't think wood should be perfect, if I wanted that I would use MDF.

I have previously made side tables for our master bedroom but after two grown kids came back we had to move to the smaller of the two bedrooms we have. So here’s my 13” width version !

Nice easy build, thanks again Ana. Took longer to figure my new measurements for my cut list than actually building them!

Only slightly modified cottage bench - I made the storage area bigger and added shelves to put my shoes. Only my second project so it's not perfect (especially the paint job) but I loooove it! Sure, the shoe rack I had was perfectly functional and bigger, but this is waaay prettier.